Electrical - Commercial/Industrial

Morris Black Insulated In-Line Splice - Morris Electric

Insulated Electrical Power Connector In-Line Splice 4 Set Screws 750-250 MCM - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice 750-250 MCM features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• 4 Set Screws
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Black Insulated In-Line Splice 500 - 6

Insulated Electrical Power Connector In-Line Splice 500-#6 - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Weatherproof Boxes - 23.8 Cubic Inch Capacity

Weatherproof Boxes - One Gang Deep 23.8 Cubic Inch Capacity - 5 Outlet Holes 3/4" Gray - A powder coated Large Weatherproof Electrical Box - 5 Outlet.

Weatherproof Boxes - One Gang Deep 23.8 Cubic Inch Capacity - 5 Outlet Holes 3/4" Gray features include:

• Length 4-1/2” X Width 2-3/4” X Depth 2-5/8”
• Large Weatherproof Electrical Box - 5 Outlet Includes Closure Plugs
• Detachable Lugs Provided
• Ground Screw Installed
• Reinforced Connector Outlets
• Seamless Die Cast Aluminum
• Powder Coat Finish
• Individually Shrink Wrapped Packaging
• cULus Listed
• Order Qty of 1 = 1 Piece

Morris Single Pole Switch Commercial Grade 81990

Commercial Grade Decorative Single Pole Switch/Receptacle Rocker Switch 15A-125V - A Decorative Single Pole Switch that's attractive and durable.

Commercial Grade Decorative Single Pole Switch/Receptacle Rocker Switch Ivory 15A-125V features include:

• Commercial Grade Garbage Disposal Decorative Switch is designed to with stand rigorous commercial environments
• Decorative Single Pole Switch/Receptacle Rocker Switch has an elegant design which provides multiple controls in a single-gang wall box
• Fit standard wall boxes
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• 15A, 125V
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• UL 94V-2 Flame Rating
• Temperature Rating: -40°F to 167°F
• Wallplate Not Included
• Copper Wire Only
• UL listed
• Order Qty of 1 = 1 Piece

Morris Triple Rocker Switch Commercial Grade 81970

Commercial Grade Decorative Triple Rocker Switch 15A-120/277V - An attractive Triple Rocker Switch at a good price.

Commercial Grade Decorative Triple Rocker Switch Ivory 15A-120/277V features include:

• Commercial Grade Garbage Disposal Decorative Switch is designed to with stand rigorous commercial environments
• Triple rocker switch has an elegant design which provides multiple controls in a single-gang wall box
• Fit standard wall boxes
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• 15A, 120/277V
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• UL 94V-2 Flame Rating
• Temperature Rating: -40°F to 167°F
• Wallplate Not Included
• Copper Wire Only
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82070 - Morris Electric

Decorative Switches 4 Way 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory 4 Way 15A-120/277V features include:

• 4 Way Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82290 3 Way - Morris Electric

Decorative Switches 3 Way Lighted 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory 3 Way Lighted 15A-120/277V features include:

• 3 Way Lighted Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82060 3 Way - Morris Products

Decorative Switches 3 Way 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory 3 Way 15A-120/277V features include:

• 3 Way Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82285 Single Pole Lighted

Decorative Switches Single Pole Lighted 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches Ivory Single Pole Lighted 15A-120/277V features include:

• Single Pole Lighted Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Decorative Switches 82050 Single Pole - FireFold

Decorative Switches Single Pole 15A-120/277V - Our Decorative Switch wires quickly and easily.

Decorative Switches features Ivory Single Pole 15A-120/277V include:

• Single Pole Decorative Switch 15A 120/277V
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head Tri-combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• Copper Wire Only
• UL 94V-2 Flame Rating
• Temperature Rating:-40°F to 167°F
• Wallplate Not Included
• UL listed
• Order Qty of 1 = 1 Piece

Morris Single Pole Toggle Switch & Pilot Light 82095 

Single Pole Toggle Switch and Pilot Light 15A-120V - This Single Pole Toggle Switch comes with a pilot light.

Single Pole Toggle Switch and Pilot Light Ivory 15A-120V features include:

• Single Pole Toggle Switch and Pilot Light 15A, 120V
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid only)
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Copper wire Only
• Temperature Rating: -40°F to 167°F
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Morris Commercial 3 Way Toggle Switch 82025 - FireFold

Commercial 3 Way Toggle Switch 20A-120/277V - 3-Way Ivory Toggle Switch for commercial use.

Commercial 3 Way Toggle Switch Ivory 20A-120/277V features include:

• Commercial grade is designed to with stand rigorous commercial environments
• 3-Way Toggle Switch 20A, 120/277V
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In Solid only)
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Copper Wire Only
• Temperature Rating: -40°F to 167°F
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Morris Commercial Single Pole Toggle Switch 82020

Commercial Single Pole Toggle Switch 20A-120/277V - Single Toggle Ivory Switch for commercial use.

Commercial Single Pole Toggle Switch Ivory 20A-120/277V features include:

• Commercial grade is designed to with stand rigorous commercial environments
• Single Pole Toggle Switch 20A, 120/277V
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid only)
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• Copper Wire Only
• Temperature Rating: -40°F to 167°F
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Morris Toggle Switch 3 Way 82030 - 15A-120/277V

Toggle Switch 3 Way 15A-120/277V - 3 Way Ivory 15A Toggle Switch for copper.

3 Way Ivory 15A Toggle Switch features include:

• 3 Way Toggle Switch 15A 120/277V
• Made of GE Lexan
• Accepts #12 or #14 Stranded or Solid Copper Wire - Push-In use #14 Solid Only
• Steel mounting strap, zinc-plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy-access green hex head ground screw
• Temperature Rating: -40°F to 167°F
• Copper Wire Only
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Streetlighting Y-Type Mechanical Disconnect Kits #14 - #4 Run #14-#2 - These Streetlighting Y-Type Mechanical Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Mechanical Disconnect Kits #14 - #4 Run #14-#2 features include:

• Streetlighting Y-Type Mechanical Disconnect Kits Provide A Submersible T-Type Splice Solution fro Street and Parking Lot Lighting Applications
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #4 - #2 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #4 - #2 features include:

• Streetlighting Y-Type Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #14 - #6 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Non-Fused #14 - #6 features include:

• Streetlighting Y-Type Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting Y-Type Compression Breakaway Disconnect Kits Fused #4 - #2 - These Streetlighting Y-Type Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Compression Breakaway Disconnect Kits Fused #4 - #2 features include:

• Streetlighting Y-Type Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #4 - #2 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #4 - #2 features include:

• Streetlighting In-Line Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #14 - #6 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Non-Fused #14 - #6 features include:

• Streetlighting In-Line Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting In-Line Compression Breakaway Disconnect Kits Fused #4 - #2 - These Streetlighting In-Line Compression Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Compression Breakaway Disconnect Kits Fused #4 - #2 features include:

• Streetlighting In-Line Compression Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Non-Fused Mechanical Breakaway Disconnect Kits features include:

• Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits - These Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting Y-Type Fused Mechanical Breakaway Disconnect Kits features include:

• Streetlighting Y-Type Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits - These Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Non-Fused Mechanical Breakaway Disconnect Kits features include:

• Streetlighting In-Line Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits - These Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits are for Street and Parking Lot Lighting Applications

Streetlighting In-Line Fused Mechanical Breakaway Disconnect Kits features include:

• Streetlighting In-Line Mechanical Breakaway Disconnect Kits Provide Electrical Disconnect when Light Pole is seperated from Base under Impact
• Designed for Use in StreetLight Hand Holes
• Completely Waterproof  Rubber Overmolded Insulated Body Ensures Installer Safety and Connector Integrity
• Fuse or Connecting Link Remains in Load Side of Light Pole When Seperated
• Range Taking Design Covers a Wide Range of Wire Sizes Thru .38" Diameter using a Stepped "ROCKET" Sealing Feature
• Accepts Standard Cartridge Fuses 13/32" X 1-1/2" - No Glass Fuses
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• 30 Amp
• 600 Volts
• Kits Inlcude: EPDM Rubber Housing, Fuse Clips, Connecting Link(as Required), Silicone Lubricant. - Fuse Not Included
• Order Qty of 1 = 1 Piece

Submersible Insulated Streetlighting Connectors Multi-Port Offset #14 - 2/0 3 Port - This Submersible Insulated Streetlighting Connector Offset Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Offset Multi-Port #14 - 2/0 3 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 4 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 4 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• UL Tested Ambient Temperature Rating Down To 0°F
• cULus Listed
• Order Qty of 1 = 1 Piece

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 3 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port features #14 - 2/0 3 Port include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• UL Tested Ambient Temperature Rating Down To 0°F
• cULus Listed
• Order Qty of 1 = 1 Piece

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 2 Port - This Submersible Insulated Streetlighting Connector Multi-Port can be Used in StreetLighting and other Direct Burial and Submersible Applications.

Submersible Insulated Streetlighting Connectors Multi-Port #14 - 2/0 2 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in StreetLight Hand Holes and other Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• UL Tested Ambient Temperature Rating Down To 0°F
• cULus Listed
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 6 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 600 MCM 6 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 4 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 600 MCM 4 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 600 MCM 3 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 600 MCM 3 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 4 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 350 MCM 4 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 3 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 350 MCM 3 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors In-Line Splice #12 - 350 MCM - This In Line Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

In Line Submersible Pedestal Splice Connectors #12 - 350 MCM features include:

• Designed for use in Direct Burial & Submerible installations such as hand holes, below grade boxes, in the ground or submersed in water
• Range Taking Design Reduces Inventory
• AL9CU Dual Rated for Copper and Aluminum Conductors
• Insulated with High Dielectric Strength Tubber Compound
• Molded for Precise Fit & supplied with removable access plugs over the hex screws
• Eliminates the need for Taping, Heat Shrink, Etc.
• Abrasion and Chemical Resistant, will not support combustion
• UL Listed for Wet or Damp Locations, Direct Burial & Submersible per UL 486D
• Complies with ANSI C119.1 Specifications
• 600 Volts
• cULus Listed
• UL tested Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors In-Line Splice #14 - 2/0 - This In Line Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

In Line Submersible Pedestal Splice Connectors #14 - 2/0 features include:

• Designed for use in Direct Burial & Submerible installations such as hand holes, below grade boxes, in the ground or submersed in water
• Range Taking Design Reduces Inventory
• AL9CU Dual Rated for Copper and Aluminum Conductors
• Insulated with High Dielectric Strength Tubber Compound
• Molded for Precise Fit & supplied with removable access plugs over the hex screws
• Eliminates the need for Taping, Heat Shrink, Etc.
• Abrasion and Chemical Resistant, will not support combustion
• UL Listed for Wet or Damp Locations, Direct Burial & Submersible per UL 486D
• Complies with ANSI C119.1 Specifications
• 600 Volts
• cULus Listed
• UL tested Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Underground Waterproof Electrical Connectors Insulation Piercing Connectors Multi-Port 5 Port 1/0 - 350 MCM - This Multi-Port Waterproof Connector Requires No Cable Stripping or Crimping.

Underground Waterproof Electrical Connectors Insulation Piercing Connectors Multi-Port 5 Port 1/0 - 350 MCM features include:

• Insulation Piercing - Insulation Displacement Splicing Technology
• Fully submersible, completely waterproof Multi-Port Insulation Piercing Connector AL9CU Dual Rated for Copper and Aluminum wire
• Rubber Over-molded body ensures the Installer does not come into contact with bare metal conductor or the conductive material of the connector
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket
• Order Qty of 1 = 1 Piece

Underground Waterproof Electrical Connectors Insulation Piercing Connectors Multi-Port 5 Port #6 - 4/0 - This Multi-Port Waterproof Connector Requires No Cable Stripping or Crimping.

Underground Waterproof Electrical Connectors Insulation Piercing Connectors Multi-Port 5 Port #6 - 4/0 features include:

• Insulation Piercing - Insulation Displacement Splicing Technology
• Fully submersible, completely waterproof Multi-Port Insulation Piercing Connector AL9CU Dual Rated for Copper and Aluminum wire
• Rubber Over-molded body ensures the Installer does not come into contact with bare metal conductor or the conductive material of the connector
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket
• Order Qty of 1 = 1 Piece

Underground Waterproof Electrical Connectors Insulation Piercing Connectors Multi-Port 4 Port #6 - 4/0 - This Multi-Port Waterproof Connector Requires No Cable Stripping or Crimping.

Underground Waterproof Electrical Connectors Insulation Piercing Connectors Multi-Port 4 Port #6 - 4/0 features include:

• Insulation Piercing - Insulation Displacement Splicing Technology
li>Fully submersible, completely waterproof Multi-Port Insulation Piercing Connector AL9CU Dual Rated for Copper and Aluminum wire
• Rubber Over-molded body ensures the Installer does not come into contact with bare metal conductor or the conductive material of the connector
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket
• Order Qty of 1 = 1 Piece

Underground Waterproof Electrical Connectors Insulation Piercing Connectors 2 Port In-Line #2 - 350 MCM - This Two Port Waterproof Connector Requires no cable Stripping or Crimping.

Underground Waterproof Electrical Connectors Insulation Piercing Connectors 2 Port #2 - 350 MCM In-Line features include:

• Insulation Piercing - Insulation Displacement Splicing Technology
• Fully submersible, completely waterproof two port Insulation Piercing Connector AL9CU Dual Rated for Copper and Aluminum wire
• Rubber Over-molded body ensures the Installer does not come into contact with bare metal conductor or the conductive material of the connector
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket
• Order Qty of 1 = 1 Piece

Underground Waterproof Electrical Connectors Insulation Piercing Connectors 2 Port In-Line #10 - 1/0- This Two Port Waterproof Connector Requires no cable Stripping or Crimping.

Underground Waterproof Electrical Connectors Insulation Piercing Connectors 2 Port In-Line #10 - 1/0 features include:

• Insulation Piercing - Insulation Displacement Splicing Technology
• Fully submersible, completely waterproof two port Insulation Piercing Connector AL9CU Dual Rated for Copper and Aluminum wire
• Rubber Over-molded body ensures the Installer does not come into contact with bare metal conductor or the conductive material of the connector
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket
• Order Qty of 1 = 1 Piece

#8 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits.

#8 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits features include:

• Exothermic Epoxy Resin Encapsulation Technology
• UL Listed for Direct Burial & Submersible Splicing Applications
• Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket Repair
• Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, & Cable Failure
• Fast Error Proof Setup - Low Viscosity Resin Compound Penetrates Completely Around Splice
• Fungus Resistant
• Stub/Butt/Branch In-Line and Feedthrough Applications
• Rated for use with 194°F(90°C) Cable
• No Tool or Heat Source Required
• UL 486D CSA 198.2 Listed
• 600 Volt maximum
• *67028 Not UL Listed
• cULus Listed
• Order Qty of 1 = 1 Piece

#18 - #1 Large Capacity Butt/Branch ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits.

#18 - #1 Large Capacity Butt/Branch ShakeNSeal Encapsulation Epoxy Resin Splice Kits features include:

• Exothermic Epoxy Resin Encapsulation Technology
• UL Listed for Direct Burial & Submersible Splicing Applications
• Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket Repair
• Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, & Cable Failure
• Fast Error Proof Setup - Low Viscosity Resin Compound Penetrates Completely Around Splice
• Fungus Resistant
• Stub/Butt/Branch In-Line and Feedthrough Applications
• Rated for use with 194°F(90°C) Cable
• No Tool or Heat Source Required
• UL 486D CSA 198.2 Listed
• 600 Volt maximum
• cULus Listed
• 600 Volt maximum
• Order Qty of 1 = 1 Piece

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 500MCM - Dual Rated Copper and Aluminum Split Bolt Connector.

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 500MCM features include:

• AL9CU Dual rated split bolt connector is UL listed for all combinations of Aluminum, Aluminum to Copper, and Copper to Copper stranded wires
• Manufactured from Aluminum alloy
• Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors
• Free turning threads and easy to grip wrench flats
• Split bolt connector is highly resistant to season cracking and corrosion
• Anti Oxidant is recommended for all aluminum terminations
• Rated 600 Volts
• UL486B/CSA Listed
• Order Qty of 1 = 1 Piece

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 350MCM - Dual Rated Copper and Aluminum Split Bolt Connector.

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 350MCM features include:

• AL9CU Dual rated split bolt connector is UL listed for all combinations of Aluminum, Aluminum to Copper, and Copper to Copper stranded wires
• Manufactured from Aluminum alloy
• Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors
• Free turning threads and easy to grip wrench flats
• Split bolt connector is highly resistant to season cracking and corrosion
• Anti Oxidant is recommended for all aluminum terminations
• Rated 600 Volts
• UL486B/CSA Listed
• Order Qty of 1 = 1 Piece

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 4/0 - Dual Rated Copper and Aluminum Split Bolt Connector.

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 4/0 features include:

• AL9CU Dual rated split bolt connector is UL listed for all combinations of Aluminum, Aluminum to Copper, and Copper to Copper stranded wires
• Manufactured from Aluminum alloy
• Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors
• Free turning threads and easy to grip wrench flats
• Split bolt connector is highly resistant to season cracking and corrosion
• Anti Oxidant is recommended for all aluminum terminations
• Rated 600 Volts
• UL486B/CSA Listed
• Order Qty of 1 = 1 Piece

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 2/0 - Dual Rated Copper and Aluminum Split Bolt Connector.

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 2/0 features include:

• AL9CU Dual rated split bolt connector is UL listed for all combinations of Aluminum, Aluminum to Copper, and Copper to Copper stranded wires
• Manufactured from Copper alloy
• Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors
• Free turning threads and easy to grip wrench flats
• Split bolt connector is highly resistant to season cracking and corrosion
• Anti Oxidant is recommended for all aluminum terminations
• Rated 600 Volts
• UL486B/CSA Listed
• UL467 Listed Suitable for Direct Burial and Grounding/Bonding
• Order Qty of 1 = 1 Piece

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 1/0 - Dual Rated Copper and Aluminum Split Bolt Connector.

Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors 1/0 features include:

• AL9CU Dual rated split bolt connector is UL listed for all combinations of Aluminum, Aluminum to Copper, and Copper to Copper stranded wires
• Manufactured from Copper alloy
• Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors
• Free turning threads and easy to grip wrench flats
• Split bolt connector is highly resistant to season cracking and corrosion
• Anti Oxidant is recommended for all aluminum terminations
• Rated 600 Volts
• UL486B/CSA Listed
• UL467 Listed Suitable for Direct Burial and Grounding/Bonding
• Order Qty of 1 = 1 Piece