Electrical - Commercial/Industrial

Morris Terminal Kit with Controlled Cycle Crimp Tool

500 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need.

500 Piece Terminal Kit with Controlled Cycle Crimp Tool features include:

• High impact reusable Steel Box
• 22-10 Awg Ergonomic Controlled Cycle Crimp Tool
• Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects
• Contains the following:
  • 8 pcs 10012 Ring Terminal 22-16 #6
  • 10 pcs 10014 Ring Terminal 22-16 #8
  • 8 pcs 10016 Ring Terminal 22-16 #10
  • 8 pcs 10032 Ring Terminal 16-14 #6
  • 10 pcs 10034 Ring Terminal 16-14 #8
  • 14 pcs 10036 Ring Terminal 16-14 #10
  • 10 pcs 10062 Ring Terminal 12-10#8
  • 16 pcs 10064 Ring Terminal 12-10 #10
  • 10 pcs 10066 Ring Terminal 12-10 1/4”
  • 8 pcs 10068 Ring Terminal 12-10 5/16”
  • 10 pcs 10112 Spade Terminal 22-16 #6
  • 10 pcs 10114 Spade Terminal 22-18 #8
  • 10 pcs 10116 Spade Terminal 22-18 #10
  • 10 pcs 10132 Spade Terminal 16-14 #6
  • 21 pcs 10134 Spade Terminal 16-14 #8
  • 18 pcs 10136 Spade Terminal 16-14 #10
  • 23 pcs 10162 Spade Terminal 12-10 #8
  • 40 pcs 10164 Spade Terminal 12-10 #10
  • 8 pcs 10166 Spade Terminal 12-10 1/4”
  • 28 pcs 10182 Butt Connector 22-18
  • 30 pcs 10184 Butt Connector 16-14
  • 23 pcs 10186 Butt Connector 12-10
  • 8 pcs 10214 Male Disconnect 22-16 .250
  • 10 pcs 10224 Male Disconnect 16-14 .250
  • 10 pcs 10232 Male Disconnect 12-10 .250
  • 14 pcs 10314 Female Disconnect 22-18 .250
  • 10 pcs 10322 Female Disconnect 16-14 .187
  • 28 pcs 10324 Female Disconnect 16-14 .250
  • 35 pcs 10332 Female Disconnect 12-10 .250
  • 10 pcs 10411 Female Insul Disconn 22-18 .250
  • 14 pcs 10412 Female Insul Disconn 16-14 .250
  • 10 pcs 10414 Female Insul Disconn 12-10 .250
  • 8 pcs 10415 Male Insul Disconn 22-18 .250
  • 10 pcs 10416 Male Insul Disconn 16-14 .250
• Terminals and Disconnects are cULus Listed
• Order Qty of 1 = 1 Terminal Kit

Underground Waterproof Electrical Connectors Insulation Piercing Connectors 2 Port Multi-Port 6 Port 2 #2 - 350 MCM 4 #6 - 4/0 - This Two Port Waterproof Connector Requires No Cable Stripping or Crimping.

Underground Waterproof Electrical Connectors Insulation Piercing Connectors 2 Port Multi-Port 6 Port 2 #2 - 350 MCM 4 #6 - 4/0 features include:

• Insulation Piercing - Insulation Displacement Splicing Technology
• Fully submersible, completely waterproof Multi-Port Insulation Piercing Connector AL9CU Dual Rated for Copper and Aluminum wire
• Rubber Over-molded body ensures the Installer does not come into contact with bare metal conductor or the conductive material of the connector
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket
• Order Qty of 1 = 1 Piece

1/0 - 750 MCM In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits.

1/0 - 750 MCM ShakeNSeal Encapsulation Epoxy Resin Splice Kits features include:

• Exothermic Epoxy Resin Encapsulation Technology
• UL Listed for Direct Burial & Submersible Splicing Applications
• Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket Repair
• Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, & Cable Failure
• Fast Error Proof Setup - Low Viscosity Resin Compound Penetrates Completely Around Splice
• Fungus Resistant
• Stub/Butt/Branch In-Line and Feedthrough Applications
• Rated for use with 194°F(90°C) Cable
• No Tool or Heat Source Required
• UL 486D CSA 198.2 Listed
• 600 Volt maximum
• *67028 Not UL Listed
• cULus Listed
• Order Qty of 1 = 1 Piece

Aluminum Mechanical Lugs Four Conductors Dual Set Screws - Four Hole Mount 1000MCM-350MCM - 4 Hole Aluminum Mechanical Connectors provide for Flexibility in Installation.

Aluminum Mechanical Lugs 4 Conductors - 4 Hole Mount Dual Set Screws 1000MCM-350MCM features include:

• 4 Mounting Holes in Pad allow for 4 Bolts when Mounting these 4 Conductor Mechanical Lugs
• 4 Conductor Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
• AL9CU Dual Rated for both Copper and Aluminum Conductors
• Electro-Tin Plated to provide low contact resistance and protection against corrosion
• Assembly can be made with only a screwdriver or allen wrench and they are re-usable
• NEMA Standard Mounting Hole Drilling 1-3/4” Centers
• Aluminum Connector is rated 600V 194°F (90°C)
• UL486B/CSA Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Clear Multi-Cable Insulated Electrical Power Connectors Dual Entry 8 Port 500-#6 - With our Clear Multi Conductor Insulated Connector, you'll see your termination is right every time

Clear Insulated Electrical Power Connectors Clear Multi-Cable Connector - Dual Entry features include:

• Clear Insulation allows Visual Confirmation that conductor is properly inserted
• Multi-Port 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
• Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
• Pre-filled with Oxide Inhibitor
• Easy Re-Entry for Changes, Inspection or Troubleshooting
• Removable Plugs marked with wire size provide easy access for installation.
• Temperature range of –49°F to 194°F (–45° to 90°C)
• Wire Entry from Either Side of Clear Insulated Connector
• Insulated Aluminum Connector eliminates the need for time consuming manual taping, reducing installation time
• One Wire Per Terminal
• PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field
• ANSI C119.4 & cULus 486b Listed
• 600 Volt
• Rated for use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

200 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need.

200 Piece Terminal Kit with Controlled Cycle Crimp Tool features include:

• High impact reusable plastic box
• 22-10 Awg Ergonomic Controlled Cycle Crimp Tool
• Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects
• Contains the following:
  • 4 pcs 10012 Ring Terminal 22-16 #6
  • 4 pcs 10014 Ring Terminal 22-16 #8
  • 4 pcs 10016 Ring Terminal 22-16 #10
  • 4 pcs 10032 Ring Terminal 16-14 #6
  • 4 pcs 10034 Ring Terminal 16-14 #8
  • 5 pcs 10036 Ring Terminal 16-14 #10
  • 4 pcs 10062 Ring Terminal 12-10#8
  • 6 pcs 10064 Ring Terminal 12-10 #10
  • 4 pcs 10066 Ring Terminal 12-10 1/4”
  • 4 pcs 10068 Ring Terminal 12-10 5/16”
  • 4 pcs 10112 Spade Terminal 22-16 #6
  • 4 pcs 10114 Spade Terminal 22-18 #8
  • 4 pcs 10116 Spade Terminal 22-18 #10
  • 4 pcs 10132 Spade Terminal 16-14 #6
  • 8 pcs 10134 Spade Terminal 16-14 #8
  • 7 pcs 10136 Spade Terminal 16-14 #10
  • 9 pcs 10162 Spade Terminal 12-10 #8
  • 16 pcs 10164 Spade Terminal 12-10 #10
  • 4 pcs 10166 Spade Terminal 12-10 1/4”
  • 11 pcs 10182 Butt Connector 22-18
  • 11 pcs 10184 Butt Connector 16-14
  • 9 pcs 10186 Butt Connector 12-10
  • 4 pcs 10214 Male Disconnect 22-16 .250
  • 4 pcs 10224 Male Disconnect 16-14 .250
  • 4 pcs 10232 Male Disconnect 12-10 .250
  • 5 pcs 10314 Female Disconnect 22-18 .250
  • 4 pcs 10322 Female Disconnect 16-14 .187
  • 11 pcs 10324 Female Disconnect 16-14 .250
  • 13 pcs 10332 Female Disconnect 12-10 .250
  • 4 pcs 10411 Female Insul Disconn 22-18 .250
  • 5 pcs 10412 Female Insul Disconn 16-14 .250
  • 4 pcs 10414 Female Insul Disconn 12-10 .250
  • 4 pcs 10415 Male Insul Disconn 22-18 .250
  • 4 pcs 10416 Male Insul Disconn 16-14 .250
• Terminals and Disconnects are cULus Listed
• Order Qty of 1 = 1 Terminal Kit

Black Insulated Multi-Conductor Electrical Power Connectors 12 Ports 3/0 - 6 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 12 Ports 3/0 - 6 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Black Insulated Multi-Conductor Electrical Power Connectors 10 Ports 3/0 - 6 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 10 Ports 3/0 - 6 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Black Insulated Multi-Conductor Electrical Power Connectors 12 Ports 2/0 - 6 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 12 Ports 2/0 - 6 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Black Insulated Multi-Conductor Electrical Power Connectors 10 Ports 2/0 - 6 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 10 Ports 2/0 - 6 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Insulated Electrical Power Connector In-Line Splice 250-#6 - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Black Insulated In Line Splice - FireFold

Insulated Electrical Power Connector In-Line Splice 2/0-#6 - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 4 - 14 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 4 - 14 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Black Insulated In-Line Splice 1/0 -14 - Firefold

Insulated Electrical Power Connector In-Line Splice 1/0-#14 - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Insulated Multi-Cable Connector - Dual Entry

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 3/0 - 6 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 3/0 - 6 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Black Insulated In-Line Splice 2 - 14 - Firefold

Insulated Electrical Power Connector In-Line Splice #2-#14 - Black Insulated Splice for easy fast hassle free installations

Black Insulated Electrical Power Connector In-Line Splice features include:

• 6061-T6 Aluminum CU9AL Dual Rated for use with Copper and/or Aluminum wires
• Insulated Splice with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Insulated Splice provides Easy Re-entry for changes, inspection or troubleshooting
• Plugs marked with connector max wire size for easy identification
• One wire per terminal
• Temperature range of –49°F to 194°F (–45° to 90°C)
• 600 Volts
• ANSI C119.4 & cULus 486b Listed
• Rated for Use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Multi-Cable Connector Dual Entry 4 Ports 2/0 - 6

Black Insulated Multi-Conductor Electrical Power Connectors 4 Ports 2/0 - 6 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 4 Ports 2/0 - 6 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

#18 - #1 Butt/Branch or #18 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits - These are Fast Easy and Inexpensive Direct Burial and Submersible Electrical Splice Kits.

#18 - #1 Butt/Branch or #18 - 4/0 In-Line ShakeNSeal Encapsulation Epoxy Resin Splice Kits features include:

• Exothermic Epoxy Resin Encapsulation Technology
• UL Listed for Direct Burial & Submersible Splicing Applications
• Durable Impregnable Epoxy Splice kits are Perfect for Above and Below Ground Splicing and Jacket Repair
• Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, & Cable Failure
• Fast Error Proof Setup - Low Viscosity Resin Compound Penetrates Completely Around Splice
• Fungus Resistant
• Stub/Butt/Branch In-Line and Feedthrough Applications
• Rated for use with 194°F(90°C) Cable
• No Tool or Heat Source Required
• UL 486D CSA 198.2 Listed
• 600 Volt maximum
• 67024 Butt/Branch Applications Wire Range is #18 - #1 In-Line Aplication Wire Range is #18 - 4/0
• cULus Listed
• Order Qty of 1 = 1 Piece

Split Bolt Connectors For Copper Conductors #4 - This Split Bolt Connector for Stranded Wires is durable and easy to use.

Split Bolt Connectors For Copper Conductors #4 features include:

• Split bolt connector is UL listed for Copper and Copper weld stranded wires only
• Manufactured from compact, high strength, high copper alloy
• Free running threads and easy to grip wrench flats
• Highly resistant to season cracking and corrosion
• Provides a maximum pressure and ensures a secure connection on all combinations of connectors
• Split bolt connector is rated 600 Volts
• UL486A/CSA Listed
• UL467A Listed for Direct Burial & Grounding/Bonding Applications thru 500MCM
• Order Qty of 1 = 1 Piece

Morris Aluminum Mechanical Lugs 2 Conductors - Firefold

Aluminum Mechanical Lugs Panelboard Lugs - 2 Conductors 300MCM - #6 Awg - Panelboard Lug with 2 Conductors for 300MCM.

Aluminum Mechanical Lugs Panelboard Lugs - 2 Conductors 300MCM - #6 Awg features include:

• 300MCM panelboard lugs manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity
• AL9CU Dual rated for both copper and aluminum conductors
• Electro-tin plated to provide low contact resistance and protection against corrosion
• Assembly can be made with only a screwdriver or allen wrench and they are re-usable
• Panelboard lugs rated 600V 194°F (90°C)
• UL486B/CSA Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Copper Long Barrel 1 Hole Compression Lugs #4 Awg 3/8 Stud - One Hole Copper Compression Lugs for fast reliable electrical cable terminations.

Copper Long Barrel 1 Hole Compression Lug #4 Awg 3/8 Stud features include:

• Single Mounting Hole
• Our One Hole Copper Compression Lugs are made of high-conductivity Seamless Electrolytic Copper
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and maximizes conductivity
• Crimp Marks indicate Proper Crimp Locations
• Compression Lugs are Marked with Die Index and Color Codes for easy identification
• Long Barrel Accomodates Multiple Crimps
• UL 486A Listed
• Listed for 35KV when properly installed
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Compression Splices Aluminum Long Cylinder  #2 Awg

Aluminum Long Barrel Compression Splices #2 Awg - Aluminum Compression Splices are Dual Rated for use with both Copper & Aluminum Conductors.

Aluminum Long Barrel Compression Splices #2 Awg features include:

• Aluminum Compression Splices are AL9CU Dual Rated & accept both Aluminum and Copper conductors
• Connector Barrels are coated with Oxide Inhibitor & capped
• Center Stop assures Proper Cable Installation
• Made of High-Conductivity Seamless Aluminum
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Color Coded for Easy Identification
• Marked with Die Index
• Crimp Marks indicate Proper Crimp Locations
• Long Barrel Accomodates Multiple Crimps
• UL486B Listed AL9CU
• Listed for 35KV when properly installed
• Aluminum Compression Splices are cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Compression Splices Aluminum Long Cylinder #4 Awg

Aluminum Long Barrel Compression Splices #4 Awg - Aluminum Compression Splices are Dual Rated for use with both Copper & Aluminum Conductors.

Aluminum Long Barrel Compression Splices #4 Awg features include:

• Aluminum Compression Splices are AL9CU Dual Rated & accept both Aluminum and Copper conductors
• Connector Barrels are coated with Oxide Inhibitor & capped
• Center Stop assures Proper Cable Installation
• Made of High-Conductivity Seamless Aluminum
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Color Coded for Easy Identification
• Marked with Die Index
• Crimp Marks indicate Proper Crimp Locations
• Long Barrel Accomodates Multiple Crimps
• UL486B Listed AL9CU
• Listed for 35KV when properly installed
• Aluminum Compression Splices are cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 2/0 - 6 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 2/0 - 6 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Commercial Grade Decorative Double Rocker Switch 15A-120/277V - This durable Double Rocker Switch installs easily.

Commercial Grade Decorative Double Rocker Switch Ivory 15A-120/277V features include:

• Commercial Grade Garbage Disposal Decorative Switch is designed to with stand rigorous commercial environments
• Double rocker switch has an elegant design which provides multiple controls in a single-gang wall box
• Fit standard wall boxes
• Smooth Quiet Paddle Action
• Made of GE Lexan
• Steel mounting strap Zinc-Plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy Access Green Hex Head Ground Screw
• 15A, 120/277V
• Accepts #12 or #14 Stranded or Solid Copper wire(Push-In #14 Solid Only)
• UL 94V-2 Flame Rating
• Temperature Rating: -40°F to 167°F
• Wallplate Not Included
• Copper Wire Only
• UL listed
• Order Qty of 1 = 1 Piece

Morris Toggle Switch Single Pole 15A-120/277V - Firefold

Toggle Switch Single Pole 15A-120/277V - Single Pole Toggle Switch Ivory 15A-120/277V.

Single Pole Toggle Switch Ivory 15A-120/277V features include:

• Single Pole Switch 15A 120/277V
• Made of GE Lexan
• Accepts #12 or #14 Stranded or Solid Copper Wire - Push-In use #14 Solid Only
• Steel mounting strap, zinc-plated for corrosion resistance
• Washer-type break-off plaster ear for best flush alignment
• Captive mounting screws
• Back and side wiring for easy installation
• Large head combination screws for quick wiring
• Easy-access green hex head ground screw
• Temperature Rating: -40°F to 167°F
• Copper Wire Only
• UL 94V-2 Flame Rating
• UL listed
• Order Qty of 1 = 1 Piece

Submersible Electrical Pedestal Connectors Multi-Port Splice #12 - 350 MCM 6 Port - This Multi-Port Splice Submersible Pedestal Connector can be Used in Direct Burial and Submersible Applications.

Multi-Port Submersible Pedestal Splice Connectors #12 - 350 MCM 6 Port features include:

• Fully submersible, completely waterproof Multi-Port Submersible Pedestal Splice
• Designed for Use in Hand Holes, Below Grade Boxes, Direct Burial and Submersible Applications
• Completely Waterproof  Rubber Overmolded Body Ensures Installer Safety and Connector Integrity
• Range Taking Design Covers a Wide Range of Wire Sizes using a Stepped "ROCKET" Sealing Feature
• AL9CU Dual Rated for Both Copper and Aluminum Cables
• Insulated with High Dialectric Strength Abrasion and Chemical Resistant Rubber
• Molded with Precise Fit and Supplied with Removable Access Plugs over the Set Screws
• Eliminates the Need for Taping, Heat Shrink and other Labor Intensive Insulating Methods
• UL 486D Listed for Direct Burial and Submersible Applications
• Complies with ANSI C119.1 Specifications
• 600 Volts
• Ambient Temperature Rating Down To 0°F
• Order Qty of 1 = 1 Piece

Split Bolt Connectors For Copper Conductors 1/0 - This Split Bolt Connector for Stranded Wires is durable and easy to use.

Split Bolt Connectors For Copper Conductors 1/0 features include:

• Split bolt connector is UL listed for Copper and Copper weld stranded wires only
• Manufactured from compact, high strength, high copper alloy
• Free running threads and easy to grip wrench flats
• Highly resistant to season cracking and corrosion
• Provides a maximum pressure and ensures a secure connection on all combinations of connectors
• Split bolt connector is rated 600 Volts
• UL486A/CSA Listed
• UL467A Listed for Direct Burial & Grounding/Bonding Applications thru 500MCM
• Order Qty of 1 = 1 Piece

Split Bolt Connectors For Copper Conductors #6 - This Split Bolt Connector for Stranded Wires is durable and easy to use.

Split Bolt Connectors For Copper Conductors #6 features include:

• Split bolt connector is UL listed for Copper and Copper weld stranded wires only
• Manufactured from compact, high strength, high copper alloy
• Free running threads and easy to grip wrench flats
• Highly resistant to season cracking and corrosion
• Provides a maximum pressure and ensures a secure connection on all combinations of connectors
• Split bolt connector is rated 600 Volts
• UL486A/CSA Listed
• UL467A Listed for Direct Burial & Grounding/Bonding Applications thru 500MCM
• Order Qty of 1 = 1 Piece

Split Bolt Connectors For Copper Conductors #8 - This Split Bolt Connector for Stranded Wires is durable and easy to use.

Split Bolt Connectors For Copper Conductors #8 features include:

• Split bolt connector is UL listed for Copper and Copper weld stranded wires only
• Manufactured from compact, high strength, high copper alloy
• Free running threads and easy to grip wrench flats
• Highly resistant to season cracking and corrosion
• Provides a maximum pressure and ensures a secure connection on all combinations of connectors
• Split bolt connector is rated 600 Volts
• UL486A/CSA Listed
• UL467A Listed for Direct Burial & Grounding/Bonding Applications thru 500MCM
• Order Qty of 1 = 1 Piece

Morris Electrical Connectors - 4 Conductors 600MCM-3/0

Aluminum Mechanical Lugs Panelboard Lugs - 4 Conductors 600MCM - 3/0 - Aluminum alloy Panelboard Lug with 4 Conductors.

Aluminum Mechanical Lugs Panelboard Lugs - 4 Conductors 600MCM - 3/0 features include:

• Aluminum alloy panelboard lug manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity
• AL9CU Dual rated for both copper and aluminum conductors
• Electro-tin plated to provide low contact resistance and protection against corrosion
• Assembly can be made with only a screwdriver or allen wrench and they are re-usable
• NEMA Drilling 1-3/8” Centers
• Aluminum lug rated 600V 194°F (90°C)
• UL486B/CSA Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Electrical Connectors - Four Hole Mount

Aluminum Mechanical Lugs Four Conductors - Four Hole Mount 600MCM-#4 Awg - 4 Hole Aluminum Mechanical Connectors provide for Flexibility in Installation.

Aluminum Mechanical Lugs 4 Conductors 600MCM-#4 Awg - 4 Hole Mount features include:

• 4 Mounting Holes in Pad allow for 4 Bolts when Mounting these 4 Conductor Mechanical Lugs
• 4 Conductor Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
• AL9CU Dual Rated for both Copper and Aluminum Conductors
• Electro-Tin Plated to provide low contact resistance and protection against corrosion
• Assembly can be made with only a screwdriver or allen wrench and they are re-usable
• NEMA Standard Mounting Hole Drilling 1-3/4” Centers
• Aluminum Connector is rated 600V 194°F (90°C)
• UL486B/CSA Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Electrical Connectors - 4 Hole Mount 250MCM-#6 Awg

Aluminum Mechanical Lugs Four Conductors - Four Hole Mount 250MCM-#6 Awg - 4 Hole Aluminum Mechanical Connectors provide for Flexibility in Installation.

Aluminum Mechanical Lugs 4 Conductors - 4 Hole Mount 250MCM-#6 Awg features include:

• 4 Mounting Holes in Pad allow for 4 Bolts when Mounting these 4 Conductor Mechanical Lugs
• 4 Conductor Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
• AL9CU Dual Rated for both Copper and Aluminum Conductors
• Electro-Tin Plated to provide low contact resistance and protection against corrosion
• Assembly can be made with only a screwdriver or allen wrench and they are re-usable
• NEMA Standard Mounting Hole Drilling 1-3/4” Centers
• Aluminum Connector is rated 600V 194°F (90°C)
• UL486B/CSA Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Aluminum Mechanical Lugs One Conductor 2/0-#14 Awg - One Hole Mount - Dual-Rated and Reusable One Hole Aluminum Conductor Lug

Aluminum Mechanical Lugs One Conductor 2/0-#14 Awg - One Hole Mount features include:

• One Hole Aluminum Mechanical Lug is manufactured from High Strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
• AL9CU Dual Rated for both Copper and Aluminum Conductors
• Electro-Tin Plated to provide low contact resistance and protection against corrosion
• Assembly can be made with only a screwdriver or allen wrench and they are re-usable
• 90712~90718 have slotted screws
• One Hole Aluminum Mechanical Lug is rated 600V 194°F (90°C)
• UL486B/CSA Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Copper Flex Cable Long Barrel 2 Hole Compression Lugs 300 MCM 1/2 Stud 1-3/4" Hole Spacing - One Hole Copper Compression Lugs for fast reliable electrical cable terminations.

Copper Flex Cable Long Barrel 2 Hole Compression Lug 300 MCM 1/2 Stud 1-3/4" Hole Spacing features include:

• Flared Belled Entry for Easy Insertion of Fine Strand Flexible Cables such as Class G, Class H, Class I, Class K (Battery), Class M (Welding) and DLO Cable Constructions
• Two Mounting Hole
• Our Two Hole Copper Compression Lugs are made of high-conductivity Seamless Electrolytic Copper
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and maximizes conductivity
• Crimp Marks indicate Proper Crimp Locations
• Compression Lugs are Marked with Die Index and Color Codes for easy identification
• UL 486A Listed
• Listed for 35KV when properly installed
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Copper Short Barrel 1 Hole Compression Lugs #8 Awg 5/16 Stud- One Hole Copper Compression Lugs for fast reliable electrical cable terminations.

Copper Short Barrel 1 Hole Compression Lug #8 Awg 5/16 Stud features include:

• Single Mounting Hole
• Our One Hole Copper Compression Lugs are made of high-conductivity Seamless Electrolytic Copper
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and maximizes conductivity
• Crimp Marks indicate Proper Crimp Locations
• Compression Lugs are Marked with Die Index and Color Codes for easy identification
• Peephole Included for Verification of Proper Strand Insertion
• UL 486A Listed
• Listed for 35KV when properly installed
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Aluminum Long Barrel Compression Splices #1 Awg - Aluminum Compression Splices are Dual Rated for use with both Copper & Aluminum Conductors.

Aluminum Long Barrel Compression Splices #1 Awg features include:

• Aluminum Compression Splices are AL9CU Dual Rated & accept both Aluminum and Copper conductors
• Connector Barrels are coated with Oxide Inhibitor & capped
• Center Stop assures Proper Cable Installation
• Made of High-Conductivity Seamless Aluminum
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Color Coded for Easy Identification
• Marked with Die Index
• Crimp Marks indicate Proper Crimp Locations
• Long Barrel Accomodates Multiple Crimps
• UL486B Listed AL9CU
• Listed for 35KV when properly installed
• Aluminum Compression Splices are cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Aluminum Long Barrel 1 Hole Compression Lugs 300 MCM 3/8" Stud Size - A One Hole Compression Lug for use with Copper or Aluminum Cables.

Aluminum Long Barrel 1 Hole Compression Lugs 300 MCM 3/8" Stud Size features include:

• One Hole Aluminum Compression Lugs are AL9CU Dual Rated and accept both Aluminum and Copper Conductors
• Connector Barrel is Coated with Oxide Inhibitor & capped
• Aluminum Compression Lug is made of High-Conductivity Seamless Aluminum
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Single Mounting Hole
• Color Coded for Easy Identification
• Marked with Die Index
• Crimp Marks indicate Proper Crimp Locations
• UL486B Listed AL9CU
• Listed for 35KV when properly installed
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris 1 Hole Compression Lugs - 3/0 Awg 3/8" Stud Size

Aluminum Long Barrel 1 Hole Compression Lugs 3/0 Awg 3/8" Stud Size features include:

• One Hole Aluminum Compression Lugs are AL9CU Dual Rated and accept both Aluminum and Copper Conductors
• Connector Barrel is Coated with Oxide Inhibitor & capped
• Aluminum Compression Lug is made of High-Conductivity Seamless Aluminum
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Single Mounting Hole
• Color Coded for Easy Identification
• Marked with Die Index
• Crimp Marks indicate Proper Crimp Locations
• UL486B Listed AL9CU
• Listed for 35KV when properly installed
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris 1 Hole Compression Lugs - 1/0 Awg - 1/2 Stud

Aluminum Long Barrel 1 Hole Compression Lugs 1/0 Awg 1/2" Stud Size - A One Hole Compression Lug for use with Copper or Aluminum Cables.

Aluminum Long Barrel 1 Hole Compression Lugs 1/0 Awg 1/2" Stud Size features include:

• One Hole Aluminum Compression Lugs are AL9CU Dual Rated and accept both Aluminum and Copper Conductors
• Connector Barrel is Coated with Oxide Inhibitor & capped
• Aluminum Compression Lug is made of High-Conductivity Seamless Aluminum
• Uniform Bright Electro-Tin Plating resists corrosion, reduces contact resistance and gives you maximum conductivity
• Single Mounting Hole
• Color Coded for Easy Identification
• Marked with Die Index
• Crimp Marks indicate Proper Crimp Locations
• UL486B Listed AL9CU
• Listed for 35KV when properly installed
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Clear Multi-Cable Insulated Electrical Power Connectors Dual Entry 3 Port 350-#6 - With our Clear Multi Conductor Insulated Connector, you'll see your termination is right every time

Clear Insulated Electrical Power Connectors Clear Multi-Cable Connector - Dual Entry features include:

• Clear Insulation allows Visual Confirmation that conductor is properly inserted
• Multi-Port 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
• Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
• Pre-filled with Oxide Inhibitor
• Easy Re-Entry for Changes, Inspection or Troubleshooting
• Removable Plugs marked with wire size provide easy access for installation.
• Temperature range of –49°F to 194°F (–45° to 90°C)
• Wire Entry from Either Side of Clear Insulated Connector
• Insulated Aluminum Connector eliminates the need for time consuming manual taping, reducing installation time
• One Wire Per Terminal
• PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field
• ANSI C119.4 & cULus 486b Listed
• 600 Volt
• Rated for use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Clear Insulated Multi-Cable Connector - Dual Entry

Clear Multi-Cable Insulated Electrical Power Connectors Dual Entry 2 Port 2/0-#6 - With our Clear Multi Conductor Insulated Connector, you'll see your termination is right every time

Clear Insulated Electrical Power Connectors Clear Multi-Cable Connector - Dual Entry features include:

• Clear Insulation allows Visual Confirmation that conductor is properly inserted
• Multi-Port 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
• Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
• Pre-filled with Oxide Inhibitor
• Easy Re-Entry for Changes, Inspection or Troubleshooting
• Removable Plugs marked with wire size provide easy access for installation.
• Temperature range of –49°F to 194°F (–45° to 90°C)
• Wire Entry from Either Side of Clear Insulated Connector
• Insulated Aluminum Connector eliminates the need for time consuming manual taping, reducing installation time
• One Wire Per Terminal
• PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field
• ANSI C119.4 & cULus 486b Listed
• 600 Volt
• Rated for use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Clear Multi-Cable Insulated Electrical Power Connectors Dual Entry 8 Port #2-#14 - With our Clear Multi Conductor Insulated Connector, you'll see your termination is right every time

Clear Insulated Electrical Power Connectors Clear Multi-Cable Connector -Dual Entry features include:

• Clear Insulation allows Visual Confirmation that conductor is properly inserted
• Multi-Port 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
• Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
• Pre-filled with Oxide Inhibitor
• Easy Re-Entry for Changes, Inspection or Troubleshooting
• Removable Plugs marked with wire size provide easy access for installation.
• Temperature range of –49°F to 194°F (–45° to 90°C)
• Wire Entry from Either Side of Clear Insulated Connector
• Insulated Aluminum Connector eliminates the need for time consuming manual taping, reducing installation time
• One Wire Per Terminal
• PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field
• ANSI C119.4 & cULus 486b Listed
• 600 Volt
• Rated for use with 194°F(90°C) Cables
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris High Temperature Ring Terminals - 8 Wire 1/4 Stud

8 AWG High Temperature Ring Terminals for extreme temperature applications

8 AWG High Temperature Ring terminals features include:

• Applications Include: Electric space heaters, HVAC controls, Industrial automation, Commerical ovens and fryers & Industrial kilns
• Material: Nickel Plated Steel
• Temperature Rating: 900°F(482°C)
• Butted Seam
• Order Qty of 100 = 1 Bag of 100

Morris Residential Floor Boxes Hinged Lid Nickel Plated

Residential Floor Boxes Hinged Lid Nickel Brass Plated - Our Hinged Lid Floor Box are Perfect for Residential Applications.

Residential Floor Boxes Hinged Lid Nickel Brass Plated features include:

• Adjustable to make installation easy
• Heavy Duty Nickel Plated Brass Finished Covers
• Junction Box, Tamper Resistant Duplex Receptacle & Rubber Gasketed Cover Included
• Corrosion resistant hardware and watertight gasket assure long life and reliability
• 1/2 Conduit Knockouts
• Fits manufacturers 3-1/2 deep switch box
• Can accommodate data-communications inserts
• Includes 15A 125V White Tamper Resistant Receptacle
• Complies with NEMA WD1-1983
• UL 351B & UL 498 listed receptacles
• cULus listed
• Order Qty of 1 = 1 Piece

Morris Terminal Kit with Crimp Tool - Morris Electric

175 Piece Terminal Kit with Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the crimp tool you'll need.

175 Piece Terminal Kit with crimp tool features include:

• High impact reusable plastic box
• Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects
• Heavy Duty 22-10 Awg Crimp Tool
• Contains the following:
  • 4 pcs 10014 Ring Terminal 22-16 #8
  • 4 pcs 10034 Ring Terminal 16-14 #8
  • 5 pcs 10036 Ring Terminal 16-14 #10
  • 4 pcs 10062 Ring Terminal 12-10#8
  • 6 pcs 10064 Ring Terminal 12-10 #10
  • 4 pcs 10066 Ring Terminal 12-10 1/4”
  • 4 pcs 10112 Spade Terminal 22-16 #6
  • 4 pcs 10114 Spade Terminal 22-18 #8
  • 4 pcs 10116 Spade Terminal 22-18 #10
  • 4 pcs 10132 Spade Terminal 16-14 #6
  • 7 pcs 10134 Spade Terminal 16-14 #8
  • 6 pcs 10136 Spade Terminal 16-14 #10
  • 8 pcs 10162 Spade Terminal 12-10 #8
  • 15 pcs 10164 Spade Terminal 12-10 #10
  • 4 pcs 10166 Spade Terminal 12-10 1/4”
  • 10 pcs 10182 Butt Connector 22-18
  • 10 pcs 10184 Butt Connector 16-14
  • 8 pcs 10186 Butt Connector 12-10
  • 4 pcs 10214 Male Disconnect 22-16 .250
  • 4 pcs 10224 Male Disconnect 16-14 .250
  • 4 pcs 10232 Male Disconnect 12-10 .250
  • 5 pcs 10314 Female Disconnect 22-18 .250
  • 4 pcs 10322 Female Disconnect 16-14 .187
  • 10 pcs 10324 Female Disconnect 16-14 .250
  • 12 pcs 10332 Female Disconnect 12-10 .250
  • 4 pcs 10411 Female Insul Disconn 22-18 .250
  • 5 pcs 10412 Female Insul Disconn 16-14 .250
  • 4 pcs 10414 Female Insul Disconn 12-10 .250
  • 4 pcs 10415 Male Insul Disconn 22-18 .250
  • 4 pcs 10416 Male Insul Disconn 16-14 .250
• Terminals and Disconnects are cULus Listed
• Order Qty of 1 = 1 Terminal Kit

Morris Multi Cable Connector - Morris Electric

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 2 - 14 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 3 Ports 2 - 14 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Morris Multi-Cable Connector - Black Insulated

Black Insulated Multi-Conductor Electrical Power Connectors 4 Ports 4 - 14 - Dual Side Entry - Our Dual Entry Cable Connector makes electric Splicing & Tapping Simple Fast & Easy

Black Insulated Multi-Conductor Electrical Power Connectors 4 Ports 4 - 14 - Dual Entry features include:

• Wire Entry from Either Side of connector
• Insulated with rugged high-dielectric Rubber/Vinyl Coating
• Pre-Filled with Oxide Inhibitor
• Easy Re-entry for Changes, Inspection or Troubleshooting
• Plugs Marked with Connector Max Wire Size for easy identification
• Dual Entry Cable Connector is CU9AL Dual Rated 6061-T6 Aluminum for use with Copper and/or Aluminum wires
• One Wire per Terminal
• Temperature Range of –49°F to 194°F (–45° to 90°C)
• ANSI C119.4 & cULus 486b Listed thru 750MCM
• Rated 194°F(90°C) 600 Volt
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece