Bulk Cable Wall Plates
DataComm Recessed Bulk Cable Wall Plate w/ Power
Use DataComm Electronics’ patented new recessed low voltage cable plate with recessed power to install power and low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The 45-0021 recessed low voltage cable plate with recessed power can be installed upright or upside down.
Use either a single gang retrofit work box or for new construction installations, use a new nail on box. Once you have wired the receptacle*, then begin by inserting the receptacle portion of the plate into the work box. Once the entire recessed plate is flush to the wall, using the two white screws supplied, screw the receptacle portion of the plate to the work box. Next, screw down the screws with wings. These wings will fasten tightly against the back of the drywall. Plug in all necessary video and audio cables. Install your flat panel TV mounting bracket per the flat panel TV bracket manufacturer’s instructions.
DataComm Recessed Low Voltage Media Plate w/ Duplex Surge SuppressorThe patented Recessed Low Voltage Media Plate with Duplex Receptacle/Duplex Surge Suppressor offers the convenience of a duplex receptacle and a recessed plate with enough room to store low voltage cables behind your flat panel TV. This box is available in surge and 20 amp commercial grade models.
PowerBridge TWO-CK In-Wall Dual Power and Cable Management Kit
The PowerBridge TWO-CK In-Wall Dual Power and Cable Management Kit makes extending your power source behind your TV safe and easy. It's a simple do-it-yourself process with no electrical wiring and no pieces to assemble.
The extra deep 1.5 inch dual recessed outlet mounts into standard drywall and connects to the standard-sized source receptacle using the six foot power extension cord.
Built-in bulk cable feed-throughs make audio/video cable routing an integrated feature. There's no need to install additional plates to house cables. Extra-wide openings accommodate all sizes of TV cords and create more usable space behind the slimmest mounts.
PowerBridge ONE-CK Cable Management System w/ PowerConnect
The ONE-CK cable management system from PowerBridge Solutions is an ideal solution for concealing cables behind wall-mounted HDTVs. It requires no electrical wiring, so no special qualifications or certifications are required. It plugs right into your existing power source!
A bulk cable pass through allows you to run all your connectivity right alongside your power cable. The convenient PowerConnect power extension cable included is in-wall rated for safety. The deep, recessed receptacle allows for both TV and co-located wall-mounted SoundBar power connection.
For additional compatibility and easy installation, the ONE-CK receptacles are the same dimensions as a standard wall plate, measuring 2.75" in width by 4.5" in height.
Datacomm 45-0023-WH Recessed Pro-Power Kit with Straight Blade Inlet
The Datacomm 45-0023-WH Recessed Pro-Power Kit with Straight Blade Inlet allows you to conceal power and other low voltage cables behind your HDTV by running them through the wall.
- (1) Recessed Cable Plate with Straight Blade Inlet
- (1) Recessed Cable Plate with Power
- (1) 6ft 16/2 w/Ground Extension Cord
- (1) Electrical Outlet Boxes
- (3) Wire Nuts
PowerBridge ONE-PRO-6-WH Cable Management System
Few people know that most local building codes prohibit the in-wall use of ordinary appliance power and extension cords. But that doesn’t mean you have to add “Hire an Electrician” to your to-do list! With the PowerBridge ONE-PRO-6-WH, you can make hiding wires a real one-man job. This wire management kit allows you to create a clean and professional look without fiddling with electrical lines or compromising your safety. It comes with two wall plates: one “in” that draws power from your existing electrical outlet and one “out” that sends that power to your TV.
This kit includes two wall plates, two back boxes, one 6’ length of in-wall Romex, and one 6’ external male to female power cord. Step-by-step instructions and a color-coded wiring template make this an easy project for even the first-time do-it-yourselfer. It can be installed horizontally or vertically onto any one-gang bracket or box. These plates also include a brush-style low voltage cable pass-through, eliminating the need for an additional cut-in for your wires. Recessed into the wall, the ONE-PRO-6-WH is ideal for use behind low profile television mounts or in any location where space is tight.
Warning: This product does not have built-in surge protection or A/C filtering. We recommend connecting it to a quality surge protector or power conditioner for maximum equipment protection. Do not use this product near water.
DataComm Recessed Pro-Power Kit w/ Duplex Surge Suppressor and Straight Blade Inlet
The patented DataComm 45-0024-WH Recessed Pro-Power Kit is an easy-to-install solution for hiding power and audio/video cables behind an HDTV. A duplex surge supressor receptacle provides power for up to two devices, while a straight blade inlet provides organized cable routing. A flexible serrated screen on the interior of the straight blade inlet keeps cables securely routed.