All

1U 19 Inch Patch Panel Support Bar 

This is a 19" cable support bar made from durable steel with a black powder coat finish. Attach to the rear of any standard 19" rack mount patch panel. The cables that are punched down to the rear of the patch panel will now be organized neatly with all the strain relief needed, keeping away intermittent connections caused by rear cable movement.

Quest Cable Tray Coupler Zinc

Quest offers couplers for joining all Quest Cable Trays. Available as a standard nut and bolt.

The perfect solution for clean cable runs, FireFold's 2U Horizontal Cable Organizer is easy to install, easy to use, and makes even the most intricate installs simple and clean.

Ultra-Durable Organizer Tabs

Designed to route cables running into the rack, passing them along to the patch panel, the organizer tabs are flexible, making it quick and ease to organize and pass cables through, while at the same time being extremely durable and able to withstand plenty of heavy use.

Closed Design

Whether you've completed your cable run, or plan to return to the job first thing in morning, the Closed Design is perfect for any install. The heavy-plastic cover is built to conceal all ran cables, and detaches and reattaches to the organizer in seconds. The organizer also comes with plenty of space beneath the plastic cover to maintain a required bend radius for network cabling, preventing any signal loss

2U

Also known as a Rack Unit, 2U is the height of the organizer. A measurement of "2U" is 3.50 Inches

Setup.exe - Your Rack Installation Wizard by PATCHBOX

The Setup.exe enables one technician to do the job of two. The Setup.exe secures the weight of equipment, such as switches, in server and network racks until they are securely screwed in. Mounted inside out of a rack the Setup.exe creates the ideal workspace to place a laptop during configuration or terminating a patch panel.

MOUNTED IN SECONDS.

The Setup.exe comes with two spring loaded bolt plungers that safely secure the Setup.exe in place. The brackets can also be adjusted to fit 19" rails with different thicknesses and are made from durable stainless steel. The body of the Setup.exe is aluminum to save weight on your service trips.

MOBILE WORKSPACE.

Easily configure Switches, Servers etc. with two hands while the Setup.exe holds your Laptop for you. One side is rubberized so your Laptop does not slip off.

YOUR IRREPLACEABLE THIRD HAND.

The Setup.exe will become your valuable third hand. No more acts of balancing expensive equipment with one hand while trying to get the screws in with the other. The Setup.exe holds equipment with up to 50kg (110 lbs) for you effortlessly.

YOUR TOOLS WITH YOU ALWAYS.

The Setup.exe has holes to place spare cage nuts in. You can also put some Velcro on it to mount all kinds of tools to it so you always have them with you. Cable ties also have their own spot for times when you need to heavily secure something.

dev/mount 50-pack

The /dev/mount is the fastest solution replacing conventional cage nuts used in server and network racks. Its faster mounting capabilities increases productivity of mounting 19” equipment. The /dev/mount holds equipment securely in place before the nuts are fastened, making hardware mounting a faster and more secure task.

Completely effortlessly requiring zero prior assembly as well its quick mounting & quick-release functionality the /dev/mount significantly increases productivity of mounting hardware into network and server racks. Constructed from spring steel and aluminum the /dev/mount is the ideal tool for mounting equipment into 19'' racks at superior speed.

• Quick mounting and release system
• Dual-sided / reversible HEX-nuts included
• Holds equipment securely
• Zero prior assembly required
• Made in Germany

SIMPLIFY COMPLEXITY.

Doing more with fewer parts the /dev/mount is durable, affordable and designed to last. Conventional cage nuts consist of many individual parts and are therefore difficult to handle and install. The /dev/mount requires zero assembly prior install and snaps securely in position. Only half the parts are required to mount any 1RU 19" equipment, compared to cage nuts.

SIMPLIFY DEVICE MOUNTING.

The /dev/mount increases speed and accuracy of hardware mounting / dismounting. Forming a strong extruding profile capable of carrying the weight of hardware until fastened. The included HEX nuts can be tightened without tools making the process completely tool less.

SIMPLIFY HANDLING.

It is very common for conventional cage nuts to have sharp, unsafe serrated edges which can be painful and cause cuts. The /dev/mount has been designed with practicality, safety and ease of handling in mind safeguarding the working environment. The /dev/mount is not only faster at completing tasks but also safer.

Compatibility with 19" rails.

The /dev/mount is compatible with 19" rails with square punched holes that are capable of installing standard server rails.

Vertical Cable 45U Vertical Cable Manager – Double Sided

The 047-VMF-4502 Vertical Wire Manager is a high-capacity, double-sided cable management solution designed to support clean and efficient vertical cable routing in 45 RMU network racks. Made of durable plastic, this double-sided manager organizes both front and rear cables, offering flexible and easy-access installation.

Compatible with Vertical Cable Relay Racks:

SKU: 047-WPR-0207, 047-WOS-0220, 047-WOS-0245, 047-WOS-0445

APPLICATIONS

The 047-VMF-4502 Vertical Wire Manager is ideal for high-density rack environments and structured cabling systems such as:

• Enterprise Data Centers and Server Rooms
  
• Commercial Telecom and Network Closets
  
• Patch Panel and Switch Management
  
• PoE/Power Separation in AV & IT Racks
  
• Any 45U Network or Equipment Rack with Front/Rear Cabling Needs

WHY CHOOSE THE 047-VMF-4502 VERTICAL CABLE WIRE MANAGER?

Choosing the 047-VMF-4502 improves both the form and function of your network rack system:

1. Dual-Sided Efficiency: Separates front and back cable runs for cleaner, more serviceable racks.
   
2. Reduces Cable Strain and Clutter: Vertical slots and large capacity reduce stress on cables and improve system airflow.
   
3. Fast and Flexible Access: Snap-on covers enable easy cable changes and inspections without the need for tools.
   
4. Maximizes Rack Organization: Keeps data and power lines neat and out of the way, helping avoid accidental disconnects.
   
5. Ideal for Professional Installs: A must-have for technicians building clean, scalable network systems.

The perfect solution for clean cable runs, Quest's 1U Horizontal Cable Organizer is easy to install, easy to use, and makes even the most intricate installs simple and clean.

Ultra-Durable Organizer Tabs

Designed to route cables running into the rack, passing them along to the patch panel, the organizer tabs are flexible, making it quick and ease to organize and pass cables through, while at the same time being extremely durable and able to withstand plenty of heavy use.

Closed Design

Whether you've completed your cable run, or plan to return to the job first thing in morning, the Closed Design is perfect for any install. The heavy-plastic cover is built to conceal all ran cables, and detaches and reattaches to the organizer in seconds. The organizer also comes with plenty of space beneath the plastic cover to maintain a required bend radius for network cabling, preventing any signal loss

1U

Also known as a Rack Unit, 1U is the height of the organizer. A measurement of "1U" is 1.75 Inches.

Quest Cable Tray Wall Bracket Zinc

Quest V brackets are ideal for mounting cable trays on the wall.

Quest Cable Tray L Wall Bracket Zinc

Quest L brackets are ideal for mounting cable trays on the wall.

Quest Cable Tray Guider Zinc

Quest offers a cable tray accessory that guides cables in a waterfall manner. It prevents cable shorts and kinks when running wires vertical in the cable tray.

PATCHBOX 365 Cat. 6a

PATCHBOX is the state of the art cable management system; fast and neat. It replaces conventional cable management and patch cords completely with an all-in-one solution.

With its retractable cables the PATCHBOX provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can even be done remotely further reducing costs.

Easy Documentation

Superior Airflow

24” Wide Cabinets Instead of 30” Wide

Note: There is a 3-5 business day lead time for this product

 Quest Cable Tray Ceiling Zinc 

 Quest Cable Tray Central Hold Down

Quest offers a cable tray accessories for securing trays directly to the floor.

Quest Cable Tray Corner Bar Kit

Quest offers a full line of cable tray accessories. This accessory is for the secure joining of tray corners.

Quest Cable Tray Rubber End Cap White 50 pack

Quest offers rubber end caps for covering terminated/jagged cut ends of the cable tray. Not only does it make the trays look professional, but it also protects the installers from cuts and unnecessary harm.

Quest Cable Tray Strengthening Bar Kit Zinc

Quest offers a full line of cable tray accessories. This accessory is for the secure joining of straight lengths.

Quest Cable Tray Bottom Coupler, Zinc

Quest offers couplers for joining all Quest Cable Trays. Available as a easy to install tooless coupler.

Constructed of heavy duty 1.5” wide structural steel and covered in a dual-layer of sturdy black powder coat, the CLB is built to last through installation and decades of use. They are UL listed and rated for a weight limit of 187lbs per foot. The open arrangement also allows easy access for routine maintenance, cleaning, and troubleshooting. Middle Atlantic’s legacy is one of quality and professionalism, and these cable ladders come with the assurance of a lifetime limited warranty against any manufacturer defects.

The CLB cable ladder can be combined with a new or pre-existing ladder and structural elements and it is compatible with many major brands of networking and installation accessories. Different lengths and widths are available from Middle Atlantic, as well as bends, corners, and sections with adjustable rungs. All ladder sections and accessories can be mixed and matched for the perfect configuration.

Quest Vertical D-Ring Cable Manager

These D-Ring Cable Managers are ideal for mounting on open frame racks, floor and wall enclosures, or directly onto drywall. They are extremely flexible and are available in 3 sizes to accommodate 25, 34, or 70 cables.

Vertical Cable 45U Vertical Cable Manager

The 047-VMF-4501 is a universal-fit, single-sided vertical cable manager built for clean and efficient rack cable routing. Its modular design, durable plastic build, and flexible finger ducts make it a versatile solution for any network rack.

Compatible with Vertical Cable Relay Racks:

SKU: 047-WPR-0207, 047-WOS-0220, 047-WOS-0245, 047-WOS-0445

APPLICATIONS

The 047-VMF-4501 Vertical Wire Manager is engineered for a wide range of network and structured cabling projects, including:

• Enterprise Data Centers
  
• Server Rooms and Telecom Closets
  
• Patch Panel and Switch Management
  
• PoE and Power Cabling Installations
  
• Commercial and Campus-Wide IT Networks

WHY CHOOSE THE 047-VMF-4501 VERTICAL CABLE WIRE MANAGER?

Choosing the 047-VMF-4501 simplifies rack installations and delivers long-term cable management benefits:

1. Full-Length Cable Control: 45 RMU size matches tall enclosures for top-to-bottom cable routing.
   
2. Improves Airflow and Organization: Prevents tangles and keeps cables separated for better heat management.
   
3. Tool-Free Accessibility: Snap-on cover allows for quick cable changes and inspections without disassembly.
   
4. Clean, Professional Appearance: Maintains a neat rack aesthetic and protects against cable damage.
   
5. Compatible with Most 19” Racks: Easily integrates into new or existing rack configurations.

PATCHBOX Plus+ Cat. 6a

PATCHBOX is the state of the art cable management system; fast and neat. It replaces conventional cable management and patch cords completely with an all-in-one solution.

With its retractable cables the PATCHBOX provides the user with the exact cable length needed. No more overly long cables, creating a cabinet full of cable spaghetti. Installation time is dramatically reduced and due to the clean setup maintenance can even be done remotely further reducing costs.

Easy Documentation
Forget about sticky labels and expensive third-party manufacturer labelling solutions. PATCHBOX provides tear off labels that simply slide into the front of each cassette.

Superior Airflow
30″ wide cabinets are used mainly because of the extra space on either side of the 19“ mountings. That extra space is commonly used to hide and store excess cable.

24” Wide Cabinets Instead of 30” Wide
PATCHBOX uses flat patch cords, 100% tested according to ISO Class-E Standards (CAT 6a). Our flat patch cords only use 1/4 of the space a conventional patch cord would.

Note: There is a 3-5 business day lead time for this product

Kendall Howard 1U Tool-less 5X D-Ring Cable Manager

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U 5X D-Ring Cable Manager combines the best parts of our D-Ring Cable Management Kit and our Cable Routing Blanks. The blend of D-rings and cable routing cutouts make this one of the most versatile cable managers on the market! Whether you’re routing cables from front to back of your cabinet or organizing and supporting patch cables, this 5X D-Ring Cable Manager will be an effective tool for your IT installation.

This 1U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack mount solution that you plan to use. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.

Details

The three inch by one and three-quarter inch opening that this D-rings provides a large supported area to organize and route cable bundles in two-post racks, wall mount racks, server racks, and more. This specific ring spacer comes with seven, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables.

Cable manager can be mounted in two different positions, maximizing your cable management options. Face the D-rings toward the front of the rack to easily manage and support patch cables, or face them toward the back of the rack where the open design provides easy support of trunk cables.

Included with the cable manager are tool-less clips that snap into any cage nut style rail while eliminating the need for hardware. Standard mounting holes can be used in conjunction with rack screws on tapped rails.

What possibly could you wish for more than this? Perhaps no damage to your wallet, I bet you’re saying. Well, this is FireFold. Of course your wallet will be feeling just fine afterwards!

The PATCHBOX innovative cable organizer with zero RU – the PATCHCATCH – can simply be mounted under the mounting brackets of switches and patch panels. It doesn’t need any additional space in a network cabinet compared to conventional horizontal cable management.

All patch cords are guided to the side of the RU they are patched to keep the cabinet nice and tidy. No more crossing and cable spaghetti!

Quest Cable Tray Curved Bar Kit Zinc

Quest offers a full line of cable tray accessories. This accessory is for the secure joining of curved tray corners.

PATCHBOX 365 Cat. 6a Cassette

Years of experience, research and testing were applied to develop our patented and reliable mechanism. The spring loaded system retracts the unneeded cable length slowly and stores it safely within the cassette's housing. It is designed to last and we guarantee at least 300 pulling cycles per cassette. That equals repatching a single patch cord 300 times.

Vertical Cable Manager for 2-Post Racks, Dual-Sided Duct

Designed for use with Quest seven foot open frame two post racks, the VR-07-140 Vertical Cable Manager has a cable capacity of up to 140 cables (70 each side). It has a sturdy steel mounting plate with a black micro finish and comes complete with mounting hardware.

DataComm Electronics 15” plastic enclosure sections can be used to create a customized Cable Trench System that allows you to run large cable bundles to different levels of a home or commercial building. The added feature of a cable pass through section with multiple cover options gives you more control over your installation.

All parts sold separately to customize your Cable Trench:

• CT-5-BB Unfinished Back Box
• CT-5-SC Unfinished Solid Cover
• CT-5-TC-BR Unfinished Open Cover with Brush
• CT-5-END Open End Cap & Knockout End Cap Pack
• CT-10-CC Pack of (2) Cover Caps

* When mounting in adjacent stud bays, please use stud spacers. Also, the Cable Trench is not intended or designed to be mounted in firewall applications.

Quest Cable Tray Ceiling Hanging Hooks Zinc

Quest offers a full line of cable tray accessories to allow mounting from the ceiling. This accessory is for ceiling mounting when using threaded rods.

PATCHBOX Plus+ Cat.6a Cassette

Years of experience, research and testing were applied to develop our patented and reliable mechanism. The spring loaded system retracts the unneeded cable length slowly and stores it safely within the cassette's housing. It is designed to last and we guarantee at least 300 pulling cycles per cassette. That equals repatching a single patch cord 300 times.

Quest Cable Tray Ceiling Hanging Bar Kit with Rods

Quest offers kits of cable tray accessories to allow mounting from the ceiling.

Quest 1U Horizontal Large Finger-Duct 19" Cable Manager

Quest Finger-Duct Cable Managers organize networking cables in server rooms and network enclosures. The finger-duct design with dual hinged removable covers allows installers to channel cables with ease. Our cable managers protect system critical cables from snags, and prevents needless damage.

Quest Cable Tray Grounding Bolt, Copper

Quest offers this accessory to safely earth grounds cable tray from possible electrical currents.

Quest Cable Tray Adjustable Connector, Zinc

Quest offers a full line of cable tray accessories. This accessory is for the secure joining of vertical cable trays.

The CL-WRS is a ladder wall support bracket, designed for use with CL Series cable ladders. It is made of a robust steel construction with a scratch resistant powder coat finish. It's compatible with most major cable ladder brands and accessories, so it can be used in a variety of installations, both new and existing.

Quest Cable Tray Cable Guide

Quest offers accessories that guide and organizes cables while placed within a cable tray. Guides are stackable with multiple dividers for individual cable placement or grouping.

Designed for server installs where a quick solution to organizing several cables is required, the 1U Horizontal Cable Organizer is perfect for nearly every situation.

Open Design

Built for ease of use, the Open Design is ideal for jobs where several cables will be pulled in and out of a server rack. The open plastic clips allow for smooth drops when doing cable runs. The clips are extremely durable and able to withstand the weight and pull of cables coming and going.

Rubber Push-Through Grommets

After running your cable to the organizer, you'll have no problem running on to the component within the rack. The organizer comes complete with 4 rubber grommets, built to hold several cable bundles each. The grommets assist in the organization of multiple runs, coming and going, making clean up quick and simple.

1U

Also known as a Rack Unit, 1U is the height of the organizer. A measurement of "1U" is 1.75 Inches

PATCHBOX Frame

Quest Cable Tray Fast Fix Splicer, Zinc

Quest offers a full line of cable tray accessories. This accessory is for the secure joining of cable trays in any configuration.

Kendall Howard 0004-1-002-01 Universal Wire Minder

Ever heard of Kendall Howard? Well, you have now. Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Today, you’re taking a gander at Kendal Howard’s Universal Wire Minder. This universal wire minder is great, compact cable management tool designed to be installed onto cage nut and tapped rails in wall cabinets, wall mount racks, Telco racks, and full-size server cabinets. Don’t feel that you are limited by this list, though! This cable minder can also be mounted on walls or furniture, so the possibilities are practically infinite.

Let’s Have Some Specifics

Made in the USA, this little wire minder is made from cold-rolled steel. It has been painted with a black powder coat finish for not only durability but also to allow it to easily blend in with most rack mounts.

This wire minder has a 3 x 1.5-inch cable opening, giving you plenty of space to be able to run your cables through it. It is EIA 310-D compliant, so you know it is meeting the standards for rack mounts. Besides all this, it is able to be mounted in eight different positions. You are sure to be able to find a way to mount it to suit your needs!.

With all of this and a limited lifetime warranty from the manufacturer, how can you possibly go wrong? You can't, and you know it! Get a few of these today to find out the possibilities they allow with your project. You are sure to be able to enjoy each one for years to come.

Quest VF-07-140 6ft Vertical Cable Manager

This Vertical Cable Manager is sure to give your installation a clean and finished look. The base material of the manager is 2 mm aluminium that is painted in black electrostatic microfinish. The cable manager comes in a height of 6'.

Ultra-Durable Organizer Tabs

Designed to route cables running into the rack, passing them along to the patch panel, the organizer tabs are flexible, making it quick and ease to organize and pass cables through, while at the same time being extremely durable and able to withstand plenty of heavy use.

Closed Design

Whether you've completed your cable run, or plan to return to the job first thing in morning, the Closed Design is perfect for any install. The heavy-plastic cover is built to conceal all ran cables, and detaches and reattaches to the organizer in seconds. The organizer also comes with plenty of space beneath the plastic cover to maintain a required bend radius for network cabling, preventing any signal loss

The Compact Cable Management Solution for Tight Spaces

The Neat-Patch NP1 is the perfect solution when space is at a premium. As the 1U version of our popular NP2, it excels in situations where a 2U manager simply won't fit. Designed to maximize efficiency in tight spaces, the NP1 offers seamless cable organization while providing easy access and management.

With a maximum capacity of 24 cables, the NP1 ensures that even in constrained environments, you can achieve a clutter-free workspace. Say goodbye to tangled and disorganized cables with dedicated cable slots that securely hold each cable in place, making identification and maintenance a breeze.

The NP1 goes the extra mile by incorporating rear access in the corners, allowing for convenient rear vertical management. This thoughtful design feature ensures a complete cable management solution, even in the most challenging setups.

As a proud addition to our product line, the Neat-Patch NP1 exemplifies the same high-quality craftsmanship and attention to detail that Neat-Patch is renowned for. With its compact form factor and exceptional functionality, the NP1 delivers the perfect balance of space-saving design and efficient cable management.

Upgrade your cable organization and make the most of limited space with the Neat-Patch NP1. Experience the reliability, convenience, and versatility that make it an invaluable addition to our esteemed product lineup. Say goodbye to cable clutter and enjoy the benefits of a tidy, well-managed workspace with the Neat-Patch NP1.

Kendall Howard 1U Cable Lacing Shelf

The Kendall Howard 1U Cable Lacing Shelf is no ordinary shelf. It is designed to offer a supportive surface for cables when securing, routing, and organizing connection points to and from switches, patch panels, and other rackmount equipment. For versatile mounting, the 1U Cable Lacing Shelf can be placed above, below, behind, or in front of your network devices. As a result, valuable rack space is made available for other rack configuration needs. Managing cables on this lacing shelf is easy with the help of the Hook and Loop Cable Ties. Simply bundle cables to the 1U Cable Lacing Shelf with the Hook and Loop Cable Ties to add support, organization, and protection of your network cabling.

• 6" depth
• Supports up to 10 lbs. of cables
• 19" EIA compliant
• Made in the USA

Quest Cable Tray Fast Lock, Zinc

Quest offers a coupler for tooless connection of angles when using cable trays.