Your Cart

Free Shipping on Orders > $74.99 - *Some Exclusions May Apply

expand/collapse
(704) 979-7100 (0)
  • Adder dual redundant power supply - 8 port
  • Adder dual redundant power supply - 8 port
  • Adder dual redundant power supply - 8 port

Adder dual redundant power supply - 8 port

SKU#: PSU-RED2-8-US

UPC#:

60 Day Money Back Guarantee

100% Secure Shopping

2-year-warranty2

2 Year Warranty

SKU#: PSU-RED2-8-US

UPC#:
$1,966.50

SKU#: PSU-RED2-8-US

UPC#:

Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.

Califonia Warning 65

California Prop 65 Warning

×
For CA Residents Only.
California Proposition 65 Warning

Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.

• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.

For further information, please visit www.P65Warnings.ca.gov

  • Description+
  • Adder Dual Redundant Power Supply 8 port  

    The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swapable power modules and remote management.

    • 8 or 16 port independently controllable 12V outputs,
    • 2 hot swappable power modules,
    • Controllable via secure HTTP interface,
    • REST API for 3rd party control integration,
    • 500,000hrs MTBF ratings on power modules,
    • 12V to 5V cable converters available for units with 5V power feeds.

    Note: This product is only compatible with other Adder branded products

  • Features+
  • Power to match your needs
    While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management

    8 or 16 port power outputs with locking connectors
    RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection

    Hot swappable power modules
    Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation

    Protection
    Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device

    Web interface control
    RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information

    REST API
    A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface

    12V to 5V converter for 5V products
    Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range

    Power Distribution
    Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

  • Specs+
  • Mains inputs

    • 2 x IEC 90-264VAC 47/63Hz input
    • Efficiency 92%
    • Power Factor 0.99 typical

    Peripheral connections
    1x 8p8c for 10/100 Ethernet connection.

    Power outputs
    8 or 16 x locking 3-pin DC connector, 12VDC 20W output. Each output is a Limited Power Service (LPS) to IEC 60950-1.

    Physical design
    Compact case, robust metal construction. Designed for 19 inch rack mounting: 435mm/17.13” (w), 44mm/1.73” (h), 275mm/10.8” (d), 4.5kg/9.9lbs.

    Operating conditions

    • Temperature: 0 to 50ºC / 32 to 122ºF
    • Humidity: 5 – 90% Non condensing
    • Altitude: <2000Meters / 6500ft
    • MTBF: 500,000hrs at full load @50oC

    Local client requirements

    • Browser versions:
    • Internet Explorer® 10,11
    • Firefox 24 ESR and above
    • Chrome 43

     Approvals
    CE, FCC

  • Package Contents+
  • 0
  • Reviews+
  • Adder Dual Redundant Power Supply 8 port  

    The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swapable power modules and remote management.

    • 8 or 16 port independently controllable 12V outputs,
    • 2 hot swappable power modules,
    • Controllable via secure HTTP interface,
    • REST API for 3rd party control integration,
    • 500,000hrs MTBF ratings on power modules,
    • 12V to 5V cable converters available for units with 5V power feeds.

    Note: This product is only compatible with other Adder branded products

    Power to match your needs
    While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management

    8 or 16 port power outputs with locking connectors
    RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection

    Hot swappable power modules
    Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation

    Protection
    Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device

    Web interface control
    RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information

    REST API
    A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface

    12V to 5V converter for 5V products
    Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range

    Power Distribution
    Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

    Mains inputs

    • 2 x IEC 90-264VAC 47/63Hz input
    • Efficiency 92%
    • Power Factor 0.99 typical

    Peripheral connections
    1x 8p8c for 10/100 Ethernet connection.

    Power outputs
    8 or 16 x locking 3-pin DC connector, 12VDC 20W output. Each output is a Limited Power Service (LPS) to IEC 60950-1.

    Physical design
    Compact case, robust metal construction. Designed for 19 inch rack mounting: 435mm/17.13” (w), 44mm/1.73” (h), 275mm/10.8” (d), 4.5kg/9.9lbs.

    Operating conditions

    • Temperature: 0 to 50ºC / 32 to 122ºF
    • Humidity: 5 – 90% Non condensing
    • Altitude: <2000Meters / 6500ft
    • MTBF: 500,000hrs at full load @50oC

    Local client requirements

    • Browser versions:
    • Internet Explorer® 10,11
    • Firefox 24 ESR and above
    • Chrome 43

     Approvals
    CE, FCC

    0

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
Open Google Reviews for our website ×