All

Cat6 Ethernet Patch Cable, Black

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, versatility and ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Blue

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, White

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat6 Ethernet Patch Cable, Yellow

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Red

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat6 Ethernet Patch Cable, Green

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Black

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

NetStrand TOSLINK Digital Optical Audio Cable

NetStrand's TosLink digital optical cables allow the cleanest possible audio signal, even at the most extreme volume levels. Featuring a 1mm low-loss core, low jitter synthetic fiber, and heavy metal connectors, TosLink cables dampen vibration during transmission. They transfer audio signals via light, which eliminates the chance of RFI, EMI, or ground loop interference.

Use these cables to connect your DVD, CD, Mini Disc, DAT, and other digital audio equipment for clear, full, and richly detailed sound. Designed for CD, D/A Converters, Dolby Digital DTS surround sound receivers and more, these TosLink cables are compatible with ADAT, DAW, and Dolby Digital DTS devices with TosLink interface.

Cat6 Ethernet Patch Cable, Gray

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Ring True

NetStrand’s 3.5MM-AUDIO-MM is a male to male stereo 3.5mm audio cable. They can be used to connect MP3 players, cell phones, and computers to speakers or other devices with a 3.5mm input. One of the most common uses for these cables now is in car audio. These cables are perfect for connecting the headphone audio out on your smartphone to an auxiliary input on your stereo, allowing you to play your own music through your vehicle’s speakers. 3.5mm cables can also easily be adapted to a variety of other formats like RCA and 1/4”, making them one of the most versatile connectors available.

With solid tips and a flexible outer jacket, these heavy-duty 3.5mm stereo cables are perfectly suited for use in your car, home, or anywhere else. The sturdy molded heads and strain-relief boots protect the cables where they are most vulnerable- right at the ends- to ensure a quality static-free connection even after years of use. This 3’ cable can be used with any of FireFold’s 3.5mm splitters, adapters, and extensions for crystal clear sound in any configuration. These cables are for stereo audio applications only, and cannot be used where a third channel is needed for voice or video.

Cat6 Ethernet Patch Cable, Orange

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

HDMI to DVI Cable - DVI-D Single Link

HDMI to DVI-D Cable Single Link M/M Gold Plated is the best solution to connect HDMI devices to DVI equipment and vice versa while maintaining a high quality signal. The most common application for HDMI to DVI cables is to connect a computer to a high definition display which provides equal quality high-definition resolutions as regular HDMI to HDMI cables with resolutions up to 1080P. Moreover, HDMI to DVI Cable supports bi-directional operation that also allows the reverse configuration, delivering digital video from an HDMI-enabled output to a DVI-D capable display. In addition, this cable allow you to play your computer games on the big screen by connecting this cable between the DVI port on your PC and HDMI port on your HDTV. All our HDMI cables and devices are purchased from manufacturers that are CERTIFIED

Dual-Layer Shielding

To help eliminate electromagnetic interference (EMI) and radio frequency interference (RFI), this cable has also been outfitted with a Dual Foil Shielding.

Cat6 Ethernet Patch Cable, Purple

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

CAT5e Ethernet Patch Cable Snagless in White, RJ45, M/M

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

RG-6 Coax Cable F Type 

Our 3ft coaxial cable provides excellent video performance and quality. Our coaxial cables have f-type screw on terminal connections to minimize losses due to corrosion or oxidation of the metal contacts. The screw on F-Type connections ensure the connector will not come loose, preventing noise and/or interference due to loose connections. Typical applications include commercial or residential phone systems.

Ideal for connecting digital cable boxes, DSS receivers or any video source with F-type output connections to any TV with matching F-type input jacks.

2 RCA Audio Cable, Male to Male, RCA Audio Cable

This is an RCA Male to Male Stereo Audio Cable. This cable is most commonly used with stereo equipment or home theater set ups and is designed to carry a stereo audio signal.

CAT5e Ethernet Patch Cable Snagless in Red, RJ45, M/M

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

SCP 4K ULTRA HD HDMI Cable  (3-50ft)

In 2016, SCP upgraded their industry popular Custom Install Series - 944E HDMI cables. These SCP HDMI cables have been tested to the latest HDMI cable performance protocols and are now guaranteed to comply with the TRUE 4K Ultra HD standard of 4K@60 4:4:4 (2160p), Full 18Gbps for all SCP 944E series HDMI cables. These cables are HIGH SPEED WITH ETHERNET compliant. 

All 944E cables are UL CL-2 rated for In-Wall installation and are backward compatible with all previous HDMI versions.

NOTE: The 25-50ft lengths of this cable are directional. Please make sure you have the correct ends plugged into your source/display during installation.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Blue

Quality You Can Depend on On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Cat5e Ethernet Patch Cable Snagless in Gray, RJ45, M/M

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

SVGA Cable Double Shielded with Dual Ferrites

FireFold's High-Performance SVGA Cable features Dual Ferrite Cores and Double Shielding to guard against signal loss.

This Male to Male monitor Cable connects any VGA/QXGA source to any computer, switch or splitter with VGA female port.

It also supports all TVs and monitors including flat panel display, high-resolution desktop. CAD and graphic workstations. This cable can also be known as VGA, QXGA, and HD15.

3.5mm Male to Female Stereo Extension Cable

Ring True

FireFold’s 3.5MM-AUDIO-MF is a male to female stereo 3.5mm audio cable used for extending a pre-existing cord. They can be used to connect MP3 players, cell phones, and computers to speakers or other devices with a 3.5mm input. One of the most common uses for these cables now is in car audio. These cables are perfect for connecting the headphone audio out on your smartphone to an auxiliary input on your stereo, allowing you to play your own music through your vehicle’s speakers. 3.5mm cables can also easily be adapted to a variety of other formats like RCA and 1/4”, making them one of the most versatile connectors available.

With solid tips and a flexible outer jacket, these heavy-duty 3.5mm stereo cables are perfectly suited for use in your car, home, or anywhere else. The sturdy molded heads and strain-relief boots protect the cables where they are most vulnerable- right at the ends- to ensure a quality static-free connection even after years of use. This 6’ extension can be used with any of FireFold’s 3.5mm splitters, adapters, and cables for crystal clear sound in any configuration. These cables are for stereo audio applications only, and cannot be used where a third channel is needed for voice or video.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat5E Ethernet Patch Cable Snagless in Black, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

Cat6A Shielded Patch 26AWG 10G Cable

FireFold’s Category 6 (CAT6A Ethernet Cable) shielded Ethernet cables are made to meet market standards and assure the best performance in today’s high-speed networks. CAT6a shielded cables are backwards compatible with any 10BaseT or 100BaseT network cards and hubs, allowing you to change out your old cables for these without having to change out your equipment.

Cat6a is the latest standard that can run up to a 600 MHz frequency, transferring up to 10-Gigabits through appropriate equipment. The Cat6a shielded cables still hold a 50-micron gold plated contact within the RJ45 connectors, just as all of FireFold’s Ethernet cables to help prevent corrosion. A boot rests upon each connector, helping prevent snags and damage to your cable.

These CAT6a shielded cables are constructed from four 26 AWG shielded twisted pair pure copper wire strands in a PVC cable casing. The SSTP (screen shielded twisted pair) wires of these Cat6a patch cables are twisted together to reduce cross talk and the individual pairs have shielding around them. The pairs as a unit have an additional braided screen around them.

With a variety of lengths available, you can get the perfect Cat6a patch cable to meet your needs and get your network setup with ease. You can run lengths of up to 328 feet with these cables.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Red

Quality You Can Depend On And Performance That Can't Be Beaten

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

CAT5e Ethernet Patch Cable Snagless in Purple, RJ45, M/M

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Let’s Get Digital

Digital Visual Interface (DVI) debuted in 1999 as an industry standard for the new wave of digital video signals and it continues to be fairly common today. It is most often found on desktop PC computers and monitors although it can be found on flat panel televisions, projectors, and other devices. There are several versions of DVI available now including DVI-D (digital), DVI-A (analog), and DVI-I (integrated). Single-link and dual-link cords can be found. Dual-link cables are capable of faster refresh rates and greater resolutions. DVI is a video-only signal and will not transmit audio.

Heavy Duty DVI

FireFold’s DVID-BLK is a DVI-D 24-pin male to male dual-link cable. This cord features 28 AWG twisted copper conductors and gold-plated contacts for high-quality signal transmission and lasting corrosion resistance. The thick jacket and molded strain-relief heads give it a leg up over the competition when it comes to reliability and durability as well. To make the most secure connection possible even in the tightest of spaces, these cables also include threaded locking screws with a textured grip for easy installation.

With a maximum resolution of 2560x1600, this cable can support some of the most advanced displays on the market. By using a simple adapter, this DVI cable can be converted for use with HDMI-enabled televisions as well. Ferrite beads on either end of the cord help filter out electromagnetic and radio frequency interference, reducing noise and increasing signal purity for only the best picture quality. It is capable of transmission rates of up to 9.9Gbps, and it is compatible with both PC and Mac computers. This professional-grade cable is backed by FireFold’s signature lifetime warranty.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, White

Quality You Can Depend on On And Performance That Can't Be Beat

Regardless of the type of network, you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6

Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables is obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears, and other issues during installation or ongoing maintenance in the future. This construction also provides some much-needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60-day money-back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry-leading customer support team, and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Green

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Cat6A Slim Ethernet Patch Cable

The FireFold CAT6A Slim Line Ethernet cable is the solution to reduce congestion in high-density CAT6A Network environments, such as data centers,telecommunication, and server rooms. With the Cat6A Slim Line cable, you can fit more cables in the same space. The slim cable diameter is almost half that of a standard CAT6A cable.

Composite Cable (3-100ft)
Lights and Sound

FireFold's composite cable consists of a single yellow composite video as well RCA audio. The red and white RCA audio wires transmit left and right stereo sound most often found with composite video. They can be used together or separately. These cables are thin but durable with a PVC jacket that allows a maximum of flexibility, even in the tightest of spaces. Fully molded color-coded connectors allow for easy set-up, and the integrated strain-relief boots add to overall reliability. The use of right angle RCA adapters is still suggested in low-profile television mount installations to avoid stress on the composite ports.

Each RCA connector on this composite A/V cable is factory gold-plated which both increases the signal transmission and resists corrosion over long-term use. The high-quality 75 Ohm copper conductors are both braided and foil-shielded, reducing unwanted noise and interference. Interference is best avoided, because it can cause signal degradation and annoying visual artifacts, especially in lower resolution analog cables like composite video. Each of our 3’ composite cables also comes with the lasting assurance of our signature lifetime warranty.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted-pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.

Cat6A Slim Ethernet Patch Cable

The FireFold CAT6A Slim Line Ethernet cable is the solution to reduce congestion in high-density CAT6A Network environments, such as data centers,telecommunication, and server rooms. With the Cat6A Slim Line cable, you can fit more cables in the same space. The slim cable diameter is almost half that of a standard CAT6A cable.

SVGA Cable with 3.5mm Audio Double Shielded

FireFold's Double Shielded VGA Male to Male With 3.5MM Audio Cable.

Ideal high-performance solution for quickly connecting your PC to a video display system with speakers.

Use this cable with projectors, flat-screen monitors, KVM switches with audio, speakers or a microphone. Designed to support resolutions up to 1600x1200.

Plus this cable is shielded to extend your video and audio signals without distortion or loss.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Gray

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Cat5E Ethernet Patch Cable Snagless in White, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Orange

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

RG-6 BNC to BNC Coax Cable - flexible PVC jacket 

These RG-6 coaxial cables from FireFold come pre-terminated with BNC connectors for speed and convenience. Dual shielding helps prevent interference from outside sources.

Vanco Active High Speed HDMI Cable with Ethernet

Future-proofed and ready for today's demanding setups, these Vanco Active High Speed HDMI Cables with Ethernet ensure a crisp, clear HD signal every time. They feature a built-in active chipset with auto equalization, which ensures your HDMI signal can go the distance. They support resolutions up to Ultra HD 4K@60Hz and 4:4:4 chroma sampling.

The SecureFit connectors are pull tested up to seven pounds, providing 45 percent stronger connections than standard HDMI connectors. The built-in tabs lock into place for a solid bond.