All

Vericom SOHO/Remote Office Floor Cabinet (8-24U)

Vericom® SOHO / Remote Office Cabinets are specifically designed for small offices and remote locations where space is a premium. Fully assembled and ready to deploy, they include all the features of a full-size server cabinet, conveniently sized to fit under or on top of a desk or counter.

With a maximum rail depth of 29.5”, these cabinets are capable of storing servers, networking switches, and a variety of other security and AV equipment, while high-flow vented doors provide passive cooling to keep equipment from overheating.

Benefits:

Security & Protection

• Locking door and side panels prevent unauthorized access to equipment
• Two sets of rails provide a stable mounting structure
• Doors and side panels are grounded to the cabinet frame

Flexibility

• Includes both casters and adjustable leveling feet for both fixed and mobile installations
• Multiple cable entry slots provide greater flexibility during installation
• Mounting rails are adjustable in 3/4" depth increments to match a variety of equipment sizes
• Front door, rear door and side panels are all removable for convenient access to equipment

High Capacity

• Available in three sizes to fit in a variety of environments where space is limited
• Deeper than a wall cabinet - 29.5" maximum rail depth can handle servers and other large equipment
• Robust design can support 1,500 lbs of equipment

Vericom Server Cabinet, 24" Width, Assembled

Vericom Server Cabinets are designed and built to U.S. industry standards and provide a customizable solution for data center build-outs, network rooms, or IT closets. The feature-rich, robust design can be shipped flat packed or as a custom-configured solution that is fully assembled with Vericom accessories pre-installed.

Available as an open frame or complete enclosure in multiple size combinations/colors and 5 available door options, Vericom cabinets offer a variety of options and features to meet your specific needs.

Benefits:

Security & Protection

• Locking Doors and side panels prevent unauthorized access to equipment
• Two pairs of adjustable 19" EIA rails provide a stable mounting structure

Flexibility

• Vertical cable management channel on each side features T-shaped fingers and various sizeholes/slots for organizing cables
• Rails and cable channels can be easily repositioned in labeled, 1 cm increments to accommodate various equipment depths
• Removable and lockable half height side panels
• Doors hinge on either side and swing open 180° to provide superior access for installation and maintenance of equipment

Multi-Use

• Available in multiple size combinations to fit in a variety of environments
• Adaptable for use in data center build outs, computer rooms or data closets

Nitrotel Network Cabinet, 42U

Nitrotel Spark Series offer a select line of cabinet solutions that support and protect network devices, rack-mount servers and other applications in telecommunication
equipment rooms, data centers and enterprise cabling applications, while providing an optimized space utilization.

Spark Network cabinets with shatter-proof glass front doors and solid rear doors, provides an ideal noise control for structured cabling systems in office environments, call centers and computer rooms, while they can also be deployed in small and medium-size data centers.

CONSTRUCTED OF HEAVY DUTY STEEL AND FINISHED WITH ELECTROSTATIC BLACK PAINT . 1360kg (3000lb) CAPACITY.

This rack mount server cabinet by Quest Manufacturing comes fully assembled with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans, and equipment screws.

The 19" x 32" acrylic framed reversible door provides extra ventilation for your servers and equipment. In addition, all panels are vented to increase air circulation.

The platform and top panel feature cable cutouts for easy access. The top panel also has fan cutouts for additional ventilation.

Four fully adjustable cage nut rails allow accommodate varying equipment sizes. Accepts #12-24 Mounting Screws in EIA universal spacing.

Vericom Network Cabinet, 32" Width, Assembled

Vericom Network Cabinets are designed and built to U.S. industry standards and provide a customizable solution for data center build-outs, network rooms, or IT closets. The feature-rich, robust design can be shipped as a custom-configured solution that is fully assembled with Vericom accessories pre-installed.

Available as an open frame or complete enclosure in multiple size combinations/colors and 5 available door options, Vericom cabinets offer a variety of options and features to meet your specific needs.

Benefits:

Security & Protection

• Locking Doors and side panels prevent unauthorized access to equipment
• Two pairs of adjustable 19" EIA rails provide a stable mounting structure

Flexibility

• Vertical cable management channel on each side features T-shaped fingers and various sizeholes/slots for organizing cables
• Rails and cable channels can be easily repositioned in labeled, 1 cm increments to accommodate various equipment depths
• Removable and lockable half height side panels
• Doors hinge on either side and swing open 180° to provide superior access for installation and maintenance of equipment
• Vertical lacing channel with PDU mounts pre-installed on rear corners for easy cable management

Multi-Use

• Available in multiple size combinations to fit in a variety of environments
• Adaptable for use in data center build outs, computer rooms or data closets

Quest 300 Series Wall Enclosure with Front/Rear Access 

The 300 Series Extended Depth Wall Mount Enclosures provide usable working depth of up to 24". These enclosures allow equipment access through the smoked acrylic reversible front door, as well as through the lockable rear swing-out. They include one preinstalled 80 CFM fan for ventilation, and come complete with both front and rear cage nut rails. Available in five sizes with a black powdercoat microfinish.

Quest Floor Enclosure w/ Vented Mesh Door, 27″W X 31″D - 45U

Mesh front door design for airflow and heat dissipation.

Vented on all pannels for excellent air circulation characteristics.

Top panel features cutouts for fans and cutouts for cable access. Platform features cutouts for cable access.

Features 4 fully adjustable internal equipment cage nut rails for #12-24 mounting screws in EIA universal spacing.

Comes packaged complete with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans and equipments screws.

Quest Floor Enclosure w/ Vented Mesh Door, 23″W X 31″D - 45U

Quest 710 Series Floor Enclosures have a 23″ width by a 31″ depth, featuring a reversible vented steel mesh front door and rear vented split doors for access and ventilation. Ideal for 19” wide mounting on front and rear rails. They come complete with casters, floor levelers, a grounding bus, as well as two 80 CFM boxer fans for ventilation and air flow. These cabinets are constructed of heavy-duty steel, coming in a black powdercoat microfinish. Available assembled or non-assembled in knockdown boxes.

Quest Floor Enclosure w/ Vented Mesh Door, 23″W X 31″D - 34U

Quest 710 Series Floor Enclosures have a 23″ width by a 31″ depth, featuring a reversible vented steel mesh front door and rear vented split doors for access and ventilation. Ideal for 19” wide mounting on front and rear rails. They come complete with casters, floor levelers, a grounding bus, as well as two 80 CFM boxer fans for ventilation and air flow. These cabinets are constructed of heavy-duty steel, coming in a black powdercoat microfinish. Available assembled or non-assembled in knockdown boxes.

This rack mount server cabinet by Quest Manufacturing comes fully assembled with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans, and equipment screws.

The 27.5" x 32" acrylic framed reversible door provides extra ventilation for your servers and equipment. In addition, all panels are vented to increase air circulation.

The platform and top panel feature cable cutouts for easy access. The top panel also has fan cutouts for additional ventilation.

Four fully adjustable cage nut rails allow accommodate varying equipment sizes. Accepts #12-24 Mounting Screws in EIA universal spacing.

This rack mount server cabinet by Quest Manufacturing comes fully assembled with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans, and equipment screws.

The 19" x 32" acrylic framed reversible door provides extra ventilation for your servers and equipment. In addition, all panels are vented to increase air circulation.

The platform and top panel feature cable cutouts for easy access. The top panel also has fan cutouts for additional ventilation.

Four fully adjustable cage nut rails allow accommodate varying equipment sizes. Accepts #12-24 Mounting Screws in EIA universal spacing.

This rack mount server cabinet by Quest Manufacturing comes fully assembled with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans, and equipment screws.

The 19" x 32" acrylic framed reversible door provides extra ventilation for your servers and equipment. In addition, all panels are vented to increase air circulation.

The platform and top panel feature cable cutouts for easy access. The top panel also has fan cutouts for additional ventilation.

Four fully adjustable cage nut rails allow accommodate varying equipment sizes. Accepts #12-24 Mounting Screws in EIA universal spacing.

This rack mount server cabinet by Quest Manufacturing comes fully assembled with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans, and equipment screws.

The 19" x 32" acrylic framed reversible door provides extra ventilation for your servers and equipment. In addition, all panels are vented to increase air circulation.

The platform and top panel feature cable cutouts for easy access. The top panel also has fan cutouts for additional ventilation.

Four fully adjustable cage nut rails allow accommodate varying equipment sizes. Accepts #12-24 Mounting Screws in EIA universal spacing.