All

PROSeries Strain Relief with RED Locking Pin for all Simpy45® UTP Cat6/Cat6A RJ45 - 100pcs/bag

Simply45® strain relief boots with red locking pin will greatly reduce truck roll backs from tampering with network connections and accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B002P – Integrated Snagless Strain Reliefs lock into the RJ45 modular plug so that both the plug and strain relief can be permanently attached to the Simply45® RJ45 modular plug during the crimping cycle.

The Simply45® S45-B002P strain reliefs extend the useful life of the RJ45 modular plug termination and should be used with all terminations. It is also Fast and Easy to Use.

NOTE: The S45-B002P is designed to work with the following Simply45® part numbers: S45-1550, S45-1600/1601; S45-1700/1700P; S45-1100. For Cat5e Unshielded RJ45 modular plugs S45-1500/1501; S45-1000, please use our S45-B001 strain reliefs.

Simply45® S45-B002P Integrated Snagless Strain Reliefs for Cat6/6a and Cat5e Shielded with Internal Ground Features:

Prolongs Life of the Termination. The S45-B002 takes the strain off the terminated plug. When you do not use a strain relief, any contact with the plug or cable puts strain directly on the terminated plug. Over time this could cause one or more of the RJ45 pins to become loose. If a pin becomes loose it will create electrical resistance. Resistance creates heat. This could then cause performance problems or damage to the device socket.

Commercial Rated UL94 V0. The Simply45® S45-B002P RJ45 modular plug strain reliefs are UL94 V0 (IEC 60695-11-10) rated for all commercial installations. These strain reliefs are recommended for CMP Plenum, CMR, CM; and LSZH up to B2ca rated LAN cables.

Narrow Design for Easy Access. The S45-B002P strain reliefs are the same width as the RJ45 modular plug. Most common strain reliefs slide over the RJ45. This makes the terminated connector much wider and difficult to use in multi-port patch panels and devices. Therefore, many installers decide to forgo using strain reliefs. The Simply45® S45-B002P strain reliefs lock into the plug during the termination and maintain a very narrow profile. This allows easy access to the plug in these tight installations.

Maintains Correct Bend Radius of the Termination. The Simply45® S45-B002P Integrated Strain Reliefs protect the terminated RJ45 from damage during the life of the link or channel. Maintaining industry standards bend radius is important for maximizing the link/channel performance.

Professional Finish. In addition to protecting the termination and extending the operating life of the link/channel, the S45-B002P strain reliefs also provide a professional finish to your terminated RJ45.

Trimmable. The S45-B002P strain reliefs are trimmable so that you can adjust the bend radius if necessary to work in very tight installations.

Clear Color. The S45-B002P strain reliefs come in a clear color so that it easily works with all of the Simply45® RJ45 modular plugs indicated above.

Snagless Design. The S45-B002P strain reliefs are a snagless design. This prevents broken latch tabs on the RJ45 modular plugs.

Wide Mouth Resealable Bag for Easy Hand Access. No need to spill RJ45 mod plugs out of the bag just to reach them. The S45-B002P strain reliefs bag packaging stands up and can remain open so that you can easily reach in and remove the strain reliefs.

PoE/PoH Rated. The S45-B002P strain reliefs are ideal for PoE/PoH applications. They are Commercial Rated UL94 V0 to match their RJ45 modular plugs.

5 1/2" PROSeries Electrician Scissor

The Simply45® PROSeries Electrician Scissor with Stainless Steel Serrated Blades for non-slip cutting action is designed to cut various types of electrical wires, cables, and materials with ease. The Durable high carbon stainless steel blades features a cable cutting notch ito reduce force for larger cables. The ergonomic handles designed for both left and right handed use. Built in scraper on blades to assist with straighting wire conductors and notched to strip 18-24 AWG wire with ease.

Heavy Duty Shears – Finely Serrated High Carbon Stainless Steel Blades Cuts Wire, Insulation Materials, Cable, and More.

Multi-Function: Cuts, Strips, Files, and Trims.

7-in-1 multi bit ratcheting screwdriver, 4.5? stubby – 1 ea Blister Pack

7-in-1 multi bit ratcheting screwdriver, 9? full size – 1ea Blister Card

Keystone Snap-On ID Bars – (6) Colors- Blue, Green, Orange, Purple, Red, Yellow – 1 Set per Bag

Cat6 UTP 90° Keystone 110 Style RJ45 Jack, 8P8C, 50µ Gold Plated Contacts, IDC Cap, connector dust cover UL Listed- 1 ea/bag. ANSI/TIA 1096-A, ANSI/TIA 568.2-D, ISO/IEC 11801 Class E, PoE: IEEE 802.3bt Type 1-2. w/6-Color Snap-On ID Bars Included. 25/Pack

Cat5e UTP 90° Black Keystone 110 Style RJ45 Jack, 8P8C, 50µ Gold Plated Contacts, IDC Cap, connector dust cover UL Listed. ANSI/TIA 1096-A, ANSI/TIA 568.2-D, ISO/IEC 11801 Class D, PoE: IEEE 802.3bt Type 1. w/6-Color Snap-On ID Bars Included. 25/Pack

Cat5e UTP 180 Degree Keystone Jack, Unshielded, Slim Style, Toolless, w/6 Color ID Bars, 568B Wiring Label, ANSI/TIA 568.2-D, ISO/IEC 11801 Class D, UL – 25 EA/BAG

Cat6 Shielded Keystone Feed-Thru Coupler – Inline/Slim Style, Cat6 STP, ANSI/TIA 568.2-D, ISO/IEC 11801 Class E. Supports S45 Snap-On ID Bars – Nickel-Plated – 25 EA/BAG

Cat5e Unshielded Keystone Feed-Thru Coupler – Inline/Slim Style, Cat5e UTP, ANSI/TIA 568.2-D, ISO/IEC 11801 Class D. Supports S45 Snap-On ID Bars – 25 EA/BAG

24 Port Loaded UTP Cat6 Patch Panel, 1RU, 110 style, Cable Management Bracket, Cable Ties and Rack Screws

Simply45® Rack Mount RJ45 110-Style Patch Panels easily mount to standard TIA 19inch racks. 

Our patch panels feature rear IDC 110-Punchdown Modules. IDC compatible for 110 and Krone tools.

Panels are universal fit with heavy-duty steel construction, scratch-resistant powder-coat finish; 110 terminals Color  Coded T568A/T568B Wiring Labels.

12-Port Wall Mount Cat6 UTP Patch Panel

Simply45® 12-PORT WALL MOUNT CAT6 UTP PATCH PANEL, LOADED, REAR 110 IDC PUNCH DOWN, 89B MOUNTING BRACKET, ANSI/TIA 568-2-D, VERTICAL OR HORIZONTAL MOUNT – 1 EA/BOX

Simply45® Wall Mount RJ45 110-Style Patch Panels easily mount vertically or horizontally. Includes 89B mounting bracket. Our patch panels feature rear IDC 110-Punchdown Modules. IDC compatible for 110 and Krone tools.

24 Port PROSeries Unloaded UTP Keystone Patch Panel, Removable Face Plate, 1RU, Cable Management Bracket

24 Port PROSeries Unloaded UTP Keystone Patch Panel, Removable Face Plate 1RU for Unshielded cable, Includes Cable Management Bracket, 24 Cable Ties, and 4 Rack screws. UL certified and exceed TIA/EIA 568.2-D standards. 1 each boxed

Premium Unloaded Modular Keystone Patch Panels

Simply45® Premium Unloaded Patch Panels allow you to easily customize your network panel in the field. This allows you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules. Simply45® Premium Unloaded Patch Panels are available in standard 1RU size. Mounts to any 19-inch rack, cabinet, or wall bracket. Our unshielded panels all come with rear cable management bars and port labels. Accepts internationally standardized keystone snap-in modules.

Detachable Front Panels for Quick Installation & Easy Access.

There is no need to remove the entire panel. Our front-loadable design makes your life easier.

Unloaded Port Unshielded Keystone Patch Panel w/ Bracket

Simply45® Unloaded Keystone Modular Patch Panels allow you to easily customize your network panel in the field. This allows you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules.

Mounts to any 19-inch rack, cabinet, or wall bracket. Includes rear cable management bar; port labels; and mounting hardware. 10GBaseT and backward compliant.

Cable management bracket, cable ties, and rack mount screws included.

24 Port Unloaded STP Keystone Patch Panel, 1RU, Cable Management Bracket, Cable Ties & Rack Screws.

Simply45® Unloaded Keystone Modular Patch Panels allow you to easily customize your network panel in the field. This will enable you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules. Mounts to any 19-inch rack, cabinet, or wall bracket. Includes rear cable management bar; port labels; and mounting hardware. 10GBaseT and backward compliant.

Simply45® Unloaded Keystone Modular Patch Panels allow you to easily customize your network panel in the field. This allows you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules.

Mounts to any 19-inch rack, cabinet, or wall bracket. Includes rear cable management bar; port labels; and mounting hardware. 10GBaseT and backward compliant.

PROSeries Pass Through Red Tint, Hi/Lo Stagger - Cat6/6a UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® ProSeries Unshielded Pass Through RJ45 Modular Plugs with Cap45® for 23AWG Solid (Cat6/6a UTP), Hi/Lo Stagger, Wire Conductors 1.05mm-1.2mm/0.041″-0,047″, Max Cable OD 7.4mm/0.0291″, UL94 V0 Commercial Rated, Red Tint- 50pc/Clamshell

Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions introduces our ProSeries Pass-Through RJ45 Modular Plug, S45-1700P for unshielded LAN cables. This exclusive patented pass-through RJ45 modular plug is a historic breakthrough in “pass-through” RJ45 reliability and performance.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

PROSeries Pass Through 1 Piece Shielded External Ground Green Tint - Cat6 STP with Bar45™ & Cap45™ - 50pc Jar

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions introduces our ProSeries Shielded with External Ground Pass-Through RJ45 Modular Plug, S45-1650P. The uniquely designed and patented Simply45® ProSeries S45-1650P simplifies and improves the terminated plug performance for shielded Cat6 and Cat6A F/UTP LAN cables. The Simply45® ProSeries S45-1650P Pass-Through RJ45 modular plugs are by far the highest performing, easiest to use, and most cost-effective way to professionally terminate Cat6 Shielded STP and Cat6A F/UTP LAN cables.

Simply45® introduces our ProSeries Pass-through RJ45 Modular Plugs with our exclusive Cap45® (PATENT: 10,811,831 B1). Cap45® quickly and easily snaps onto the front of the plug covering the exposed wire ends. No risk of electrical shorting due to improperly trimmed wire ends. Simply45® ProSeries is the right solution for commercial networking, certified systems, HDBaseT, PoE/PoH, and all professional installations.

Cap45® is a must-have for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

PROSeries Pass Through 1 Piece Shielded External Ground Green Tint - Cat6 STP with Bar45™ & Cap45™ - 25pc Clamshell

Simply45 PROSeries Shielded Pass Through 1 piece RJ45 Modular Plugs with Bar45™ & Cap45™ for 23AWG Solid (Cat6/6a STP), Hi/Lo Stagger, Wire Conductors 1.05mm-1.2mm/0.041″-0,047″, Max Cable OD 7.4mm/0.0291″, UL94 V0 Commercial Rated, Green Tint

Pass Through Cat6 UTP, Green Tint - 20pcs/Bag

Simply45 Unshielded Pass Through RJ45 Modular Plugs for 23AWG Solid (Cat6 UTP), 26-24AWG Stranded (Cat5e/6 UTP), Wire Conductors 0.95mm-1.05mm/0.037″-0.041″, Max Cable OD 7.0mm/0.276″, UL94 V0 Commercial Rated, Green Tint

PROSeries Pass Through Green Tint - Cat6 UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

PROSeries Pass Through Shielded - Cat5e STP (internal ground) With Cap45™- 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45 ProSeries Shielded Internal Ground Pass Through RJ45 Modular Plug with Cap45 for 24AWG Solid (Cat5e STP), 28-26AWG Stranded (Cat5e/6/6a STP), Wire Conductors 0.95 – 1.05mm/ 0.037″ – 0.041″, Max Cable OD 6.5mm/0.255″, UL94 V0 Commercial Rated, Blue Tint

Pass Through Cat5e UTP, Blue Tint - 20pcs/Bag

Simply45 Unshielded Pass Through RJ45 Modular Plugs for (Cat5e UTP) Solid 24AWG, (Cat5e/6) Stranded 28-26AWG, Wire Conductors 0.95 – 1.05mm/ 0.037″ – 0.041″, Max Cable OD 6.5mm/0.255″, UL94 V0 Commercial Rated, Blue Tint

PROSeries Pass Through Blue Tint - Cat5e UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® is the industry-leading brand for RJ45 modular plug innovation and performance solutions. *Our S45-1501P is the same as our S45-1500P except is packaged in a convenient 50-piece plastic clamshell.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

Standard Cat7a/7/6a Shielded External Ground RJ45 Modular Plugs with Bar45™ Orange Tint, Hi/Lo Stagger - 50pcs/Jar

Simply45 Standard Series connectors feature our reengineered connector designed for the technology used today. Simply45 only uses the highest quality materials to ensure reliable results that greatly reduce truck roll backs. Our connectors are commercial rated and feature a 3 prong style contact designed for all PoE application making Simply45 the most reliable RJ45 termination on the market today.

Up until now, using an RJ45 modular plug to terminate shielded 10G LAN cables such as Cat7a, Cat7 and Cat6a were time-consuming, and frustrating, and if you ever put a Fluke test on longer distance links or channels, the results were not exactly stellar. Of course, you could use an industrial-style RJ45 Field Plug connector, but those are expensive and still require more effort than they should. The Simply45® engineering team did extensive testing and development to design a high-performing Standard WE/SS (8P8C) RJ45 modular plug solution that was both easy to use and cost-effective.

Introducing our S45-1155 Standard WE/SS Shielded with External Ground RJ45 Modular Plugs for 10G LAN cables with FPE insulated wires. FPE (foam polyethylene) insulated wires are found on most of today’s 10G Shielded LAN such as Cat7a, Cat7, Cat6a with S/FTP, U/FTP, and F/FTP LAN cable constructions. The S45-1155 are IEEE 802.3 10GBase-T compliant.

Note: If you are using a larger diameter shielded LAN cable with PE (solid polyethylene) we recommend using the S45-1150 Standard RJ45 modular plug or the Simply45® ProSeries Pass-Through part S45-1755P.

The uniquely designed Simply45® S45-1155 simplifies and improves the terminated plug performance for shielded 10G LAN cables. The S45-1155 shielded modular plugs are by far the highest performing, easiest to use, and most cost-effective way to professionally terminate 10G Shielded LAN cables with FPE insulated wires.

Standard Shielded (External Ground) Cat6 STP RJ45 Modular Plugs with Bar45™ Green Tint, Hi/Lo Stagger - 50pcs/Jar

Simply45 Standard Series connectors feature our reengineered connector designed for the technology used today. Simply45 only uses the highest quality materials to ensure reliable results that greatly reduce truck roll backs. Our connectors are commercial rated and feature a 3 prong style contact designed for all PoE application making Simply45 the most reliable RJ45 termination on the market today.

Simply45® is the industry-leading brand for RJ45 modular plug innovation and performance solutions. Introducing the Simply45® S45-1150 Standard WE/SS (8P8C) Shielded with External Ground RJ45 Modular Plug for PE Insulated Wire Conductors such as found on Cat6 Shielded STP and Cat6a F/UTP LAN cables.

The Simply45® S45-1150 RJ45 shielded modular plug provides better signal isolation and terminated performance than other shielded RJ45 modular plugs for larger diameter Shielded LAN cables using PE (solid polyethylene) insulated wire conductors.

Note: If you are using shielded 10G LAN cables with FPE (foamed polyethylene) insulated wire conductors we recommend using the S45-1155 Standard WE/SS RJ45 modular plug or the S45-1755P Shielded Pass-Through RJ45 modular plug for 10G LAN cables.

Standard Shielded (Internal ground) Cat5e STP RJ45 Modular Plugs, Blue Tint - 50pcs Clamshell

Simply45 Standard Series connectors feature our reengineered connector designed for the technology used today. Simply45 only uses the highest quality materials to ensure reliable results that greatly reduce truck roll backs. Our connectors are commercial rated and feature a 3 prong style contact designed for all PoE application making Simply45 the most reliable RJ45 termination on the market today.

Standard Cat5e RJ45 Modular Plugs, Blue Tint - 20pcs/Bag

Simply45 Unshielded Standard WE/SS (8P8C) RJ45 Modular Plugs for 24AWG (Cat5e UTP) Solid, 28-24AWG (Cat5e/6 UTP) Stranded, Wire Conductors 0.95 -1.05mm/0.037″-0.041″, Max Cable OD 6.4mm/0.252″, UL94 V0 Commercial Rated, Blue Tint

Standard RJ11/RJ12 Modular Plugs, Clear Tint - 100PC/Clamshell

Standard RJ11/RJ12 Modular Plugs, Good for all 6P4C and 6P6C application, Clear Tint, 24ct gold plated contacts (15µ) with a UL94V-2 Flammability rating. Meets ROHS, UL, FCC standards – 100PC/Clamshell

For Telephone and Data Applications

LC/UPC SM Mechanical Connector, blue - 1ea/Bag

Simply – LC/UPC Premium single-mode mechanical reusable connector with high clarity matching gel for 250/900µm fiber, blue – 1ea/Bag

10G Rated RJ45 Toolless Shielded Field Plug for larger cables- 22-24AWG, 9mm OD- Shielded 1pc for Cat6/6a/7a - 1ea/Bag

10G Rated RJ45 Field Plug for larger cables- 22-24AWG, 9mm OD – Ultra Slim – Fully Shielded 1pc Design for Cat6/6a/7a Shielded LAN cables, Toolless, Re-Usable, ANSI/TIA, ISO/IEC, PoE IEEE 802.3bt