iCON™ E4 – Control Port Expander for all iCON Controllers

The iCON-E4 Expander for all iCON controllers houses a plentitude of connection types that allows control of virtually any device. Coupled with PureLink’s innovative iCON controllers, programming your control system has never been easier. From simple huddle rooms to large command centers and more, iCON™ provides the simplest and most effective control platform to achieve your needs.

The PureLink UHD-120 1x2 Ultra HD/4K HDMI Distribution Amplifier splits an HDMI signal to send it simultaneously to two separate displays. It supports resolutions up to 1080p and 4Kx2K Ultra HD and is HDCP compliant. Built-in equalization and reclocking ensure optimal signal quality.

PureLink HC-VH1 VGA to HDMI Converter with Audio Support

The PureLink HC-VH1 VGA to HDMI Converter with Audio makes it easy to view photos, videos, and stream content directly from your computer to your HDTV. You can also use it to make an HD monitor compatible with a computer that only has VGA ports. Stereo audio is embedded right into the HDMI signal for flawless transmission.

The DVI-DOC Digital Signal Isolator from PureLink AV offers a secure way to isolate the transmission signal between video source and display for single-link DVI signals. It acts as a repeater for single-link DVI-D signals, extending the distance they can travel.

The PureLink AV HCE II Tx 4K HDMI over HDBaseT Transmitter is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

The PureLink HDS-21RS 2x1 HDMI Switcher with Scaling enables an easy way to switch between two different HDMI sources connected to a single display. It features PIP multi-view display technology and supports RS-232, IR and front panel control.

The PureLink AV HCE II Rx 4K HDMI over HDBaseT Receiver is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50-foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

Tired of being restricted by HDMI distance limitations in complex setups? Say goodbye to that frustration with the VIP-100 II HDMI over IP distribution system from PureLink AV. This transmitter can be combined with a compatible receiver to transmit over distances up to 364 feet, or 120 meters.

Get audio/video, RS-232 and IR extension coupled with matrix switching capability up to a 64x190 system to meet the needs of even the most complex and demanding setup. Point-to-many and many-to-point are also supported.

The PureLink AV HTX-RX is a receiver only, designed to work with the HTX-4400-U and HTX-8800-U HDMI matrix switchers. It receives Ultra HD/4KHDMI v1.4b uncompressed video and audio up to 10.2 Gbps up to 330 feet (100 meters) away. It supports HD multichannel audio including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz), bi-directional IR and RS-232.

The PureLink DCE II Tx/Rx DVI over CATx Extension System enables lossless DVI video transmission up to 220 feet using a single category cable. The active receiver uses the source device's power, so no external power source is required. This kit includes both the transmitter and receiver for a complete solution. Just add cables!

Full HD HDMI & USB/KVM over IP with PoE & MultiView – Decoder

The VIP-150-D is a Full HD HDMI & USB/KM AV over IP Decoder , part of the VIP-150 Multiview AV over IP system, delivering high-quality 1080P60 4:4:4 video, USB, and high-res audio over IP networks. It supports point-to-point extension up to 394ft (120m) via Cat6a and accommodates various signal types for dependable distribution, switching and matrixing needs. The VIP-150 AV over IP system provides instant image switching, and easy connections of inputs and output using the visual VIP-150 iCON Lite control interface. VIP-150 iCON Lite also makes creating a multiview arrangement on your display simple with drag and drop. Also create up to 10×10 video walls easily, and embedding and de-embedding audio is automatic by simply connecting your auxiliary audio input, or connecting the audio output of the decoder to your audio system or processor. Gran the RTSP stream to display thumbnails on your control interface for easy identification of source program, for assignment to your displays.

The VIP-150 is designed and a perfect solution for:

• Restaurants and Bars
• Fitness Centers
• House of Worship
• Museums
• Hospitality
• Retail Stores and Malls
• Bowling Centers

Full HD HDMI & USB/KVM over IP with PoE & MultiView – Encoder

The VIP-150-E is a Full HD HDMI & USB/KM AV over IP Encoder, part of the VIP-150 Multiview AV over IP system, delivering high-quality 1080P60 4:4:4 video, USB, and high-res audio over IP networks. It supports point-to-point extension up to 394ft (120m) via Cat6a and accommodates various signal types for dependable distribution, switching and matrixing needs. The VIP-150 AV over IP system provides instant image switching, and easy connections of inputs and output using the visual VIP-150 iCON Lite control interface. VIP-150 iCON Lite also makes creating a multiview arrangement on your display simple with drag and drop. Also create up to 10×10 video walls easily, and embedding and de-embedding audio is automatic by simply connecting your auxiliary audio input, or connecting the audio output of the decoder to your audio system or processor. Gran the RTSP stream to display thumbnails on your control interface for easy identification of source program, for assignment to your displays.

The VIP-150 is designed and a perfect solution for:

• Restaurants and Bars
• Fitness Centers
• House of Worship
• Museums
• Hospitality
• Retail Stores and Malls
• Bowling Centers

4K60 1×4 HDBaseT Distribution System

The HT-140U-Rx 4K60 HDBaseT distribution system makes signal distribution simple and effective. Compatibility with virtually every video and audio format means hassle free installation and operation. Our EDID management system makes it easy to select from over 32 EDID tables, alleviating issues of handshaking in all applications.

**To be used with HT-140U (Link)**

The PureLink AV HCE II Tx/Rx 4K HDMI over HDBaseT Extension System is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

The The PureLink HDG-mini HDMI Signal Generator helps verify basic technical specifications of a connected source device for troubleshooting. It can generate an image from up to five different test pattern still images and transmit that image to the DVI or HDMI monitor.

4K-HDR over HDBaseT Extension System – TAA Compliant

The HTE-T III 4K-HDR HDMI Extender over Single Cat.X with HDBaseT, RS-232, Bi-directional IR, Ethernet, PoC & ARC boosts up your video/audio transmission distance to 100m (330ft) in HDTV 1080p with 36-bit color depth and 70m (230ft) at 4K-HDR. With the advanced design for the latest HDMI 2.0a technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP 2.2 supports and compatibility are all further insured.

4K60 HDMI & USB/KM Double Gang In-wall AV over IP Encoder

The VIP-T400-E-WP is a 4K60 HDMI & USB/KM AV over IP Encoder Wallplate, designed to work together with the VIP-T400-E/D system, delivering high-quality UltraHD/4K60 4:4:4 HDR video, USB, and high-res audio over IP networks. It supports point-to-point extension up to 394ft (120m) via Cat6a and accommodates various signal types for dependable distribution, switching and matrixing needs. The proprietary channel display makes it easy to identify which source you want distributed to which display. Up to 1000 sources and even more displays can be added to the system.

Key features include ultra-low latency, quick or instant switching, video wall processing, 2ch stereo analog audio embedding. Additionally, the VIP-T400-E-WP provides diverse control options including its own API, PureLink’s iCON™ Control/Automation platform, Purelink’s VPX™ IP Video Management Software, as well as modules/plugins for Crestron and Q-Sys . It is TAA compliant, ensuring suitability for government, military, and 24/7/365 installations.

4K60 HDMI & USB/KM CAT and Fiber – AV over IP Encoder – TAA

The VIP-T400 4K HDMI & USB/KM CAT and Fiber AV over IP Encoder provides UltraHD/4K60 4:4:4 HDR video, audio, RS-232, IR, and USB 1.1, 2.0, and USB camera signal transport over IP networks. The VIP-T400 can be used as a point-to-point extension system supporting distances up to 120 meters over CAT6a, and up to 2 kilometers over SFP Single Mode Fiber, and is also compatible with MultiMode SFP for shorter distances. The VIP-T400 is designed to handle multiple signals types for applications that require reliable distribution, switching, matrixing, and layered matrix switching. The VIP-T400 supports audio insertion and extraction. Multiple control options are available including the VIP-T400’s own rich API, PureLink’s VPX IP Video Management Software, and QSC plugin. Providing complete and reliable AV over IP extension, the VIP-T400 is the ideal solution for your application. The VIP-T400 is TAA compliant, making it perfect for Government and Military applications and critical viewing 24/7/365 installations.

4K60 HDMI & USB/KM CAT and Fiber – AV over IP Decoder – TAA

The VIP-T400 4K HDMI & USB/KM CAT and Fiber AV over IP Decoder provides UltraHD/4K60 4:4:4 HDR video, audio, RS-232, IR, and USB 1.1, 2.0, and USB camera signal transport over IP networks. The VIP-T400 can be used as a point-to-point extension system supporting distances up to 120 meters over CAT6a, and up to 2 kilometers over SFP Single Mode Fiber, and is also compatible with MultiMode SFP for shorter distances. The VIP-T400 is designed to handle multiple signals types for applications that require reliable distribution, switching, matrixing, and layered matrix switching. The VIP-T400 supports audio insertion and extraction. Multiple control options are available including the VIP-T400’s own rich API, PureLink’s VPX IP Video Management Software, and QSC plugin. Providing complete and reliable AV over IP extension, the VIP-T400 is the ideal solution for your application. The VIP-T400 is TAA compliant, making it perfect for Government and Military applications and critical viewing 24/7/365 installations.

4K HDMI & USB/KM over IP Encoder – TAA

The VIP-T300-E 4K HDMI & USB/KM over IP Encoder provides UltraHD/4K video, audio, RS-232, IR, and USB signal transport over IP networks. The VIP-T300-E can be used as a point-to-point extension system supporting distances up to 300 meters, as well as layered distribution, switching, and matrix switching systems using multiple control options including PureLink’s VPX IP Video Management Software.

4K HDMI & USB/KM over IP Decoder – TAA

The VIP-T300-D 4K HDMI & USB/KM over IP Decoder provides UltraHD/4K video, audio, RS-232, IR, and USB signal transport over IP networks. The VIP-T300-D can be used as a point-to-point extension system supporting distances up to 300 meters, as well as layered distribution, switching, and matrix switching systems using multiple control options including PureLink’s VPX IP Video Management Software.

HDMI Streaming Encoder with Multi Out and Image Preview

PureLink’s VIP-STREAM-200 streaming encoder provides simple to use and the best in-class 1080P60 encoding and is the only streaming encoder to provide multiple output formats, allowing you to stream to multiple platforms simultaneously. Connect with audiences through Facebook, YouTube, Twitter, Vimeo, and many more with up to three different platforms at the same time. Setup is simple using the built-in web interface designed for access from both smart phones and laptops.

The VIP-STREAM-200 also works flawlessly with software and hardware endpoints such as VLC Player, OBS, and decoding displays such as LG with WebOS, and many others. Easily stream any source type to anywhere.

48-Port 1G L3 Switch with (4) 10G SFP+

The VIP-NET-4804PL3-1G is a next-generation L3 managed switch, expertly engineered for AV over IP applications. This advanced switch combines a comprehensive suite of L3 features to enhance performance while reducing total cost of ownership.

Equipped with (48) 1G ports and (4) 10GbE SFP ports, the VIP-NET-4804PL3-1G supports LACP and Is TAA Compliant, perfectly complementing our VIP product line.

24-Port 1G L3 Switch with (4) 10G SFP+

The VIP-NET-2404PL3-1G is a next-generation L3 managed switch purposed-designed and ready to go for AV over IP applications. The VIP-NET-2404PL3-1G o?ers a full suite of L3 features that deliver better performance and lower total cost of ownership. The VIP-NET-2404PL3-1G features (24) 1G ports and (4) 10GbE SFP ports with LACP, and TAA compliance. A perfect fit with any of our VIP products.

iCON™ T4W – Four Inch Wall Mount Touch Screen Controller with EZ Control™

The iCON™ T4W – Four Inch Wall Mount Touch Screen Controller allows control of virtually any device. Coupled with PureLink’s innovative EZ Control™ platform, programming your control system has never been easier. From simple huddle rooms to large command centers and more, iCON™ provides the simplest and most effective control platform to achieve your needs. 

iCON™ T10W – Ten Inch Wall Mount Touch Screen Controller with EZ Control™

The iCON™ T10W – Ten Inch Wall Mount All In One Touch Screen and Controller allows control of virtually any device. Coupled with PureLink’s innovative EZ Control™ platform, programming your control system has never been easier. From simple huddle rooms to large command centers and more, iCON™ provides the simplest and most effective control platform to achieve your needs. 

iCON™ T10 – Ten Inch Table Top Touch Screen Controller with EZControl™

The iCON™ T10 – Ten Inch Table Top All In One Touch Screen and Controller allows control of virtually any device. Coupled with PureLink’s innovative EZControl™ platform, programming your control system has never been easier. From simple huddle rooms to large command centers and more, iCON™ provides the simplest and most effective control platform to achieve your needs.

iCON™ K10D – Keypad / Rotary Push Dial Controller with EZControl™

The iCON™ K10D – Keypad / Rotary Push Dial Controller with EZControl™ allows control of virtually any device. Coupled with PureLink’s innovative EZControl platform, programming your control system has never been easier. From simple huddle rooms to large command centers and more, iCON provides the simplest and most effective control platform to achieve your needs.

• Easy to use EZControl programming interface
• Control devices via LAN, (2) RS-232, (2) Relay, (1) IR, (1) Digital IO
• Can be used as standalone controller/UI, or use as UI for the C-8 Master Controller

iCON™ C8 – Control / Automation System Master with iCON™ EZControl™

The iCON-C8Master Control Unit houses a plentitude of connection types that allows control of virtually any device. Coupled with PureLink’s innovative EZ Control™ platform, programming your control system has never been easier. From simple huddle rooms to large command centers and more, iCON™ provides the simplest and most effective control platform to achieve your needs.

• Easy to use EZ Control™ programming interface
• Control devices via LAN, RS232, RS485, IR, Relay, and Digital IO connections
• Front Panel Diagnostics

Dante 16 Input 16 Output Interface with DSP

The DIO-1616DSP provides sixteen (16) balanced/unbalanced stereo analog inputs, sixteen (16) balanced/unbalanced stereo analog outputs, and includes a full suite of DSP functions.

Dante 8 Input 8 Output Interface with DSP

The DIO-0808DSP provides eight (8) balanced/unbalanced stereo analog inputs, eight (8) balanced/unbalanced stereo analog outputs, and includes a full suite of DSP functions

Dante 4 Input 4 Output Interface with DSP

The DIO-0404DSP provides four (4) balanced/unbalanced stereo analog inputs, four (4) balanced/unbalanced stereo analog outputs, and includes a full suite of DSP functions.

Pro PTZ Camera with HDMI, USB 2.0, and LAN Output

The VIP-CAM-30-20x is a 1080p camera with 20x optical zoom & and 8x digital zoom for capturing HD images from long distances. With support for HDMI, USB 2.0, and IP Streaming, this camera is ideal for broadcasting high definition video signals in conferencing, live broadcast, and security/surveillance applications. The VIP-CAM-30-20x can be powered with the supplied 100-240 50/60Hz UL listed AC adapter, or PoE 802.3af.

USB 3.2 100 Meter Extender Over CAT

PureLink’s USB32-E100 USB-C 3.2 Gen 1 provides up to 100 meters of reliable extension. Adding the USB32-E100 could not be simpler, connect the TX and RX with CAT6a cable or better, apply power to the TX, add your USB devices, and that’s it! The USB32-E100 is a perfect extension solution for USB cameras, touch panels, as well as desktops, laptops, and more. TAA Compliant.

70 Meter USB 2.0 Extender over CAT5/6

PureLink’s USB 2.0 Extender of CAT provides up to 70 meters of reliable extension. Adding the USB2-E70 could not be simpler, connect the TX and RX with quality CAT5e cable or better, apply power to the TX, add your USB devices, and that’s it!

4×1 HDMI 2.0 Switcher

The HDTools™ UHDS-41R provides switching of up to four (4) Ultra HD/4K sources to a single Ultra HD/4K display. The UHDS-41R combines the latest technologies, including HDMI 2.0 and HDCP 2.2 support, with user-friendly configuration and operation via RS-232, IR, or front panel control to deliver a simple and effective multi-input A/V switching solution.

HDMI 2.1 Fiber 8K High Performance Cable with Pressure Lock Connectors

The TotalWire 8000F Series HDMI cables are made of the highest quality fiber components and comply with HDMI 2.1. With a tremendous 48Gbps bandwidth capacity, the 8000F series ensures 8K60. The TotalWire 8000F Series cables also feature SLS™ (Secure Lock System) Technology, providing a secure and stable connection to Ultra HD devices, delivering up to 15 lbs. of retention force. With Triple Shielding, highest quality jacket, you can rely on the TotalWire 8000F Series to deliver your 8K content every time.

• Ultra High Speed HDMI 2.1 cable Ultra HD 8K60
• 48 Gbps
• Triple shielded for superior noise immunity
• SLS™ secure-locking connectors

DisplayPort 1.4 Fiber 8K High Performance Cable with Pressure Lock Connectors

The TotalWire TWDP6000F Series HDMI cables are made of the highest quality fiber components and comply with HDMI 2.1. With a tremendous 48Gbps bandwidth capacity, the 8000F series ensures 8K60. The TotalWire TWDP6000F Series cables also feature SLS™ (Secure Lock System) Technology, providing a secure and stable connection to Ultra HD devices, delivering up to 15 lbs. of retention force. With Triple Shielding, highest quality jacket, you can rely on the TotalWire TWDP6000F Series to deliver your 8K content every time.

• Ultra High Speed DisplayPort 1.4 cable Ultra HD 8K60
• 48 Gbps
• Triple shielded for superior noise immunity
• SLS™ secure-locking connectors

8×8 HDMI 2.0b Matrix Switcher

6×1 HDMI / USB-C 4K60 Seamless Presentation Switcher with Dante

The PS-610 is a 6×1 HDMI/USB-C 4K60 Seamless Presentation Switch, featuring versatile input options including USB-C, HDMI, Analog, and Dante™ 2ch in/out audio. Additionally, it offers balanced analog audio embedding and de-embedding capabilities. Any five sources can be output in a Multiview configuration four at a time (sixth local RX HDMI input is not available for multiview). Equipped with user-friendly control options including Front Panel, IR control, RS-232, TCP/IP, Web GUI control, iCON™ and other third party control drivers for popular control systems are also available. The PS-610 is rich with commands including, switching, multiview, audio adjustments, front panel lockout, and more. Please contact us today to learn about this exciting new collaboration and presentation product.

Couple the PS-610 with the iCON Control System for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

4K60 HDMI 4×1 Switch with Motore Up/Down Scaling, Audio De-Embed, and Multiview

The HDTools™ MVS-41 provides Don’t Blink Seamless switching via the industry renowned Motore scaling engine. Fourteen different output resolutions can be easily set from either the front panel controls, or the RS232 API. The MVS-41 also features de-embedding of balanced stereo analog audio and SPDIF, seventeen (17) preloaded EDID tables with display EDID acquisition, and a number of Multiview layouts, including quad view for displaying all inputs simultaneously.

The MVS-41is HDCP 1.n and 2.2 compliant, and includes an infrared remote control with IR extender

The MVS-41is perfect for:

• Conference Rooms
• Hospitality and Convention Halls
• Corporate
• Entertainment
• Retail
• Home Theater
• and much more…

Couple the MVS-41with the iCON-10W 10 button controller for easy implementation of switching, layouts, and control of other devices in your application.

The MVS-41 can easily be controlled by other third party control devices from Crestron and QSC and more.

4K60 HDMI 2×1 Switch with Motore Up/Down Scaling, Audio De-Embed, and Multiview

The HDTools™ MVS-21 provides Don’t Blink Seamless switching via the industry renowned Motore scaling engine. Fourteen different output resolutions can be easily set from either the front panel controls, or the RS232 API. The MVS-21 also features de-embedding of balanced stereo analog audio and SPDIF, seventeen (17) preloaded EDID tables with display EDID acquisition, and a number of Multiview layouts for displaying both inputs simultaneously.

The MVS-21is HDCP 1.n and 2.2 compliant, and includes an infrared remote control with IR extender

The MVS-21is perfect for:

• Conference Rooms
• Hospitality and Convention Halls
• Corporate
• Entertainment
• Retail
• Home Theater
• and much more…

Couple the MVS-21with the iCON-10W 10 button controller for easy implementation of switching, layouts, and control of other devices in your application.

The MVS-21 can easily be controlled by other third party control devices from Crestron and QSC and more.

4K60 100 Meter Wallplate Extender Switching System with RX Local Auto Switching Input

The HWCE IV HDBaseT extender system provides 328 feet (100 meters) of full 4K60 4:4:4 HDR10+ extension. The wallplate transmitter is powered by the receiver (PoC), and allows manual or automatic switching (last or currently connected, with HDMI priority) between the HDMI and USB-C inputs. The Receiver provides a local auto switching HDMI 4K60 input.

4K HDMI and USB-C Over HDBaseT 3.0 100 Meter Extension System with Bi-Directional PoC

The HUE-100 HDMI and USB-C HDBaseT 3.0 extension system offers full HDMI 2.0b, HDR/HDR10/HDR10+ (High Dynamic Range) 4K@60Hz 4:4:4 up to 100 meters on CAT6a/7 cable. The HUE-100 can also transport 1080P60 8 bit up to 150 meters over CAT6a/7 cable. Manual or automatic selection of HDMI and USB-C inputs is available on front panel controls and API. User defined EDID and extraction of display EDID are easy operations using the HUE-100simple API.

The HUE-100 provides Dolby Vision, HLG, multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoC – all with zero loss and zero noise. The HUE-100 also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM. Additionally, the low profile “slim box” enclosure design makes the HUE-100 ideal for limited space installation environments, such as behind flat panel displays and video walls.

4K Auto Tracking PTZ Camera / Soundbar / Microphone All In One with Smart Gallery

PureLink™’s HUDDLE-CAM-500 provides sharp and brilliant rich imagery with its 4K high quality optics PTZ camera, with intelligent Auto Tracking. What sets the Huddle-CAM-500 apart from other all in one camera / soundbar / microphone solutions is the attention to quality. The camera section has true mechanical Pan / Tilt, allowing it to move and track the presenter without typical degradation of image quality in cameras that only use e-pan / tilt. This allows maximum use of the 4K resolution chip and optics. The built in microphone array focuses on the current presenter using 3A algorithms, up to 18 feet away, providing clear and precise audio. Additional optional table top microphones can be added to expand the pickup range for larger meeting rooms. The speaker bar utilizes a full range driver and a bass reflex port, reproducing clear high quality sound.

The Huddle-CAM-500 easily connects to your laptop by its USB-C connection, and is automatically identified as your camera/speaker/microphone hardware, making it a plug and play upgrade to your current meeting room for easy simple connections to Microsoft Teams, Google Meet, Zoom, GoToMeeting, and many others.

The Huddle-CAM-500 incorporates the latest in advanced Auto Tracking algorithms, and provides you selections of different modes of Auto Tracking such as Group Framing, Speaker Tracking and the latest technology of Smart Gallery, which provides individual images of each attendee at the conference table.

4K HDBaseT Receiver for HTX III Series

The HTX III-RX is designed for use with the HTX III-4400 and HTX III-8800 Matrix Switcher to extend 4K60 4:4:4 video, audio, two-way IR, and RS-232 signals up to 492 ft. (150m). Using PoC technology, the HTX III-RX can draw power directly from the HTX III-4400/HTX III-8800, eliminating the need for additional power supplies.

Couple the HTX III-RX with the

 iCON Control System for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

8×8 4K60 HDMI to HDBaseT/HDMI Matrix Switcher with Audio De-Embed and PoC

The HDTools™ HTX III-8800 provides matrix switching and extension up to 150 meters (492 feet) of (8) Ultra HD/4K sources via HDBaseT™ (with HTX III-RX receivers, sold separately). Each HDBaseT output includes a mirrored local HDMI output on the matrix. The HTX III-8800 also features de-embedding of balanced stereo analog audio and SPDIF on the switch for each output, and unbalanced stereo analog de-embedding on each Receiver.

The HTX III-8800 is HDCP 2.2 compliant, provides IR and RS232 extension, and offers PoC power for all HDBaseT Receivers.

The HTX III-8800 is perfect for:

• Conference Rooms
• Hospitality and Convention Halls
• Corporate
• Entertainment
• Retail
• Home Theater
• and much more…

Couple the HTX III-8800 with the iCON Control System for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

Crestron and QSC modules are also available for the HTX III-8800 as well as an intuitive API for developing control modules for other third party control systems.