All

GB's heavy wall heat shrink tubing provides maximum reliability for insulating and protecting wire, cable and terminations. Deigned for applications where high impact, abrasion and corrosion resistance is needed. This type of heat shrink is submersible and great for direct burial installations. The inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene. Shrink begins to occur at 120 degree Celsius.

Gardner Bender Plastic Clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 1/4" (6mm) diameter. Designed for use in construction, maintenance and assembly-line applications, control cabinets, panels and general applications. Choose these clamps for superior performance indoors. Working temperature range: -54 C (-66 F) to 170 C (340 F) Instructions: Position clamp at desired location, insert cable(s) or tube(s), fasten with screw or nail.

This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick-drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle Temp range: -30 to 200 degrees F and -34 to 93 degrees C

Quality electrical tape is designed for general purpose electrical applications. Gardner Bender offers a broad selection of professional grade adhesive tape, including different grades of electric tapes, sealant tapes for a complete assortment, and various colors to support your application. Adhesive tape acts as a superior solution for sealing and insulating splices, terminals and electrical connections in indoor and outdoor applications. Black and colored electrical tape is designed for general purpose electrical applications and made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids.

Pocket-sized booklets of cloth wire markers and matching terminal markers.

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial, or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties, and illumination. Gardner Bender switches are leading the industry in quality and durability.

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction, or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.

The Gardner Bender 1/2 in. Blue Plastic Metal Insulated Staples for 14/2 and 12/2 Cable (100-Pack) fasten electrical cable to wood surfaces. These staples offer a plastic sheath to prevent arc faults if the staple is over-driven through a cable jacket.

The Gardner Bender ¼ inch Coaxial Cable Clamp secures RG-59, RG-6 coaxial cables and others. This cable clamp includes a combo screw for safer installations and features a screw-in depth of ½ inch.

Ox-Gard Anti-Oxidant Compound contains prime grade zinc and is formulated with metallic zinc to create a compound that enhances electrical and thermal conductivity which is used on high power crimp connections and stud bolt mountings. When the connection is tightened, the grease is displaced, leaving a layer of zinc filling in the surface imperfections of the interface. This has a twofold effect; it improves electrical conductivity and it improves thermal conductivity. This reduces the connection temperature under high power conditions by a reduced voltage drop and by providing a heat conductivity path to the connection's substrate. Ox-Gard Anti-Oxidant Compound is manufactured with unique grease compounded from custom refined low sulphur oil. The grease base ensures brush-ability over a wide temperature range, tenacious adherence to all surfaces, resistance to water wash out and the prevention of rust and corrosion. This makes the product easier and more reliable to use.

Quality electrical tape designed for general purpose electrical applications. The vinyl tape is a tough, with an extremely durable adhesive ability. Gardner Bender electrical tape can be used in various electrical applications that require an added protection for a terminal connection. GB's electrical tape is made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids. It is a tough 7 mil tape with excellent adhesive ability and is designed for light-duty use.

When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. As the needs of professional electricians change in managing wire and cable, Gardner Bender continues to deliver innovative solutions. The GCC-006 Cable Clips are ideal for managing cords, wires and cables and are ideal for home and office use.

Pocket-sized booklets of cloth wire markers and matching terminal markers. Use to label wires and cables for easy identification. Packet contains 10 sheets of self adhesive labels.

The Gardner Bender 1/4 in. Blue Polyethylene Clip-On category 3 and 5 Data Cable Staples (100-Pack) feature UV-resistant polyethylene saddles and zinc-plated nails for excellent resistance to corrosion. These staples are ideal for securing RJ-11, RJ-12, RJ-45, Category 3 and Category 5 wire. Uses 1 nail per staple for quick and easy installation.

These low-voltage coaxial cable staples feature UV-resistant polyethylene saddles able to withstand both indoor and outdoor applications. Zinc-plated nails resist rust and corrosion and feature a sharp tip for easy starting and to reduce cracking and splintering of wood during installation. One nail per staple facilitates a quick hammer installation. Designed to secure cable of 1/4" dia or less including CAT6 or RG type cables (CAT 6, RG-6/U, RG-62A, RG-62/U) to wood.

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction, or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. The 1/2 in. Blue Polyethylene and Metal Insulated Staples (15-Pack) are an excellent choice for securing and protecting 14/2 and 12/2 non-metallic BX, MC, AC and UF cable. These staples feature metal construction for durability, and the polyethylene insulator helps protect cables and prevent arc faults.

These corrosive-resistant plated steel clamps secure wire and cable in industrial, auto/marine and where vibrations may occur.

The Gardner Bender 1 in. Rubber Insulated Metal Clamps are manufactured from plated steel for corrosion resistance. They are insulated with rubber to help protect cables and wires and cushion against vibrations.

When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. As the needs of professional electricians change in managing wire and cable, Gardner Bender continues to deliver innovative solutions. The PPR-1500 secures wire and cable in industrial, auto/marine and where vibrations may occur. Built-in screw hole allows for mounting on multiple surfaces.

These exterior cable clips are lexible to accomodate different cable sizes.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength

The Gardner Bender 3/8 in. Heat Shrink Tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength

When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection, neatness and organization. As the needs of professional electricians change in managing wire and cable, continues to deliver innovative solutions

GB's friction tape is specially designed to offer the best in gripping. A matted finish gives the user a superior, non-slip surface. Friction tape is perfect for use over electrical splices, or for wrapping grips on tools, handles or sporting goods.

This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected.

This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole. The rubber grommets ensure your wiring projects and applications are sustainable and protected.

Gardner Bender introduces a new way to organize, utilizing cable management clips. With a self- adhesive back and easy to open clips, this is a simple, affordable, and stress free way to manage any cord or cable concern. Add this to your assortment for a great impulse buy to drive exponential sales. Manage cords, wires, and cables. Home and office will be cleaner by having electronic cords under control. Minimizes any safety risks surrounding unorganized cables/wires.

When wire becomes entangled, they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. Organize and protect electrical hoses, wires and cables from cuts, abrasions and UV damage with Gardner Bender flexible tubing.

When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. As the needs of professional electricians change in managing wire and cable, Gardner Bender continues to deliver innovative solutions. Protects electrical hoses, wires and cables from cuts, abrasions and UV damage with this Gardner Bender 3/8 in. x 10 ft. Flexible Tubing. This tubing is split down the middle to accommodate wire breakout.

Gardner Bender Duct Seal Compound Plugs is a dough-like material that is easy to handle. This material helps seal and protect gaps, holes and conduit openings against dust, moisture, drafts and noise. This material is non-toxic, non-corrosive and non-staining. This seal can be used in temperatures that range between -20F up to 350F.

This compound seals conduit openings against drafts, dust moisture and noise. It also protects terminal boxes, pot heads and bushings from corrosive elements and deadens switch gear panel noise. The dough-like compound is easily "thumbed" over holes and gaps. It will not harden or form a skin under normal conditions.

Developed in response to customer demand, Gardner Bender has expanded the Cable Wraptor design to four different sizes to tailor to your cable organization needs. From the mini Wraptor which carries up to 25 lbs. to the XL Wraptor that carries up to 150 lbs., there are many practical uses for this innovative product. Organizing that tangled mess of cords, hoses, or chains will be simple when you utilize the features of the Cable Wraptor. Simple Design. Endless Solutions.

Multi-purpose plastic conical anchor kit for professionals and end-users

Pocket-sized booklets of cloth wire markers and matching terminal markers.

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial, or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties, and illumination. Gardner Bender switches are leading the industry in quality and durability.

The Gardner Bender 6/3 Amp Rotary Switch features a brass knob to highlight your decor. The switch is compatible with a 13/32 in. mounting hole and is ideal for use with lamps or other light-duty applications. This switch offers double pole, triple throw (DP3T) on-off circuitry and has 6 in. 18 AWG wire leads for installation. For use in lamps or other light-duty applications.

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial, or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties, and illumination. Gardner Bender switches are leading the industry in quality and durability.

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial, or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties, and illumination. Gardner Bender switches are leading the industry in quality and durability.

Gardner Bender has a versatile toggle switch family with multiple position configurations. Toggle switches feature flat terminals and are available in four different actuations; SPST, SPDT, DPST and DPDT. Flat terminal heavy duty toggle switches meet the standards of today's automotive, marine and industrial applications, and are great for electrical connections.

Gardner Bender has a versatile toggle switch family with multiple position configurations. Toggle switches feature flat terminals and are available in four different actuations; SPST, SPDT, DPST and DPDT. Flat terminal heavy duty toggle switches meet the standards of today's automotive, marine and industrial applications, and are great for electrical connections.

The Gardner Bender 20/10 Amp Toggle Switch features an "O" ring and has screw terminals for quick-and-easy connections. The switch offers single-pole, single-throw (SPST) ON-OFF circuitry in a classic bat-handle design for easy usage. This switch is compatible with standard 1/2 inch. mounting holes.

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial, or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties, and illumination. Gardner Bender switches are leading the industry in quality and durability.

The Gardner Bender 1/4 in. White Polyethylene Coaxial Staples (100-Pack) feature UV-resistant polyethylene saddles for durability. These staples include zinc-plated nails that can be driven in with a hammer for quick and easy installation and are ideal for securing RG-59 and RG-6 coaxial cables.

The Gardner Bender 1/4 in. Black Polyethylene Coaxial Staple (100-Pack) are ideal for securing RG-59 and RG-6 coaxial cables indoors and outdoors. These staples feature UV-resistant polyethylene saddles and can be driven in with a hammer.

These polyethylene staples with zinc plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot, or deteriorate. Use to attach all NM cable to joists, framing, and other wood installations.

The Gardner Bender Low Volt Masonry Staples secure bell, speaker, thermostat and telephone wire. The hardened nails can penetrate cement block, mortar and plaster surfaces.