Crimson-AV JS2-30S Short Throw Projector Mount - Dual Stud 30 Inch Extension
SKU#: JS2-30S
UPC#:815885012013Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Specs+
- Weight capacity: 50lb (23kg)
- Extension: 30” (762mm)
- Max lateral shift: 10”
- Vertical adjustment: +/- 5° at wall plate
- 1.5” NPT thread compatible: Yes
- Mounting surface: wood stud, concrete or cinder block
- Stud spacing: dual stud 16” on center
- Construction: aluminum/high-grade cold rolled steel
- Product finish: anodized aluminum/scratch resistant epoxy powder coat
- Product weight: 13.9lb (6.3kg) JS2-30S
- Package specifications: 37”x12.8”x9.5” JS2-30S
- Color: silver
- Model number: JS2-30S (7.5” 189mm - 30” 762mm)
- Package Contents+
- Reviews+
- Q&A+
- Weight capacity: 50lb (23kg)
- Extension: 30” (762mm)
- Max lateral shift: 10”
- Vertical adjustment: +/- 5° at wall plate
- 1.5” NPT thread compatible: Yes
- Mounting surface: wood stud, concrete or cinder block
- Stud spacing: dual stud 16” on center
- Construction: aluminum/high-grade cold rolled steel
- Product finish: anodized aluminum/scratch resistant epoxy powder coat
- Product weight: 13.9lb (6.3kg) JS2-30S
- Package specifications: 37”x12.8”x9.5” JS2-30S
- Color: silver
- Model number: JS2-30S (7.5” 189mm - 30” 762mm)
Crimson-AV JS2-30S Short Throw Projector Mount
Note: This product has been discontinued.
The Short Story
Short throw projectors were one of the most significant developments in home theater technology. By using a larger, wider lens- among other things- these projectors are capable of displaying sizable images at a short distance from the screen. This opens the door for many homeowners and presenters to use projectors in ways and spaces they wouldn’t have been able to use them before. They are becoming increasingly popular in small home theaters, offices, and even classrooms.
Mounting Matters
Because of the space limitations that often sway a user to purchase a short throw projector, mounting the projector is even more important. Mounting gets the projector out of the way and clears up space, while also presenting a clean and professional look. For many people, Crimson AV’s JS2-30S Short Throw Dual Stud Projector Mount is the perfect solution.
The JS2-30S is a mount arm for mounting a short-throw projector to two 16” on center wood studs or other surface materials such as concrete or cinder blocks. Having adjustment points is more important with a short throw projector than it is with a regular projector. Across a short space, changes to settings can make a huge difference. This projector mount has an arm that extends up to 30” from the wall. At the wall plate, you can also adjust the height by five degrees and the lateral position by 10 inches.
Crafted from aluminum and high-grade cold-rolled steel, the Crimson AV JS2-30S is rated for a projector weight of up to 50 lbs. Integrated cable management keeps the installation looking professional and the scratch-resistant finish helps preserve the sleek look of the mount through years of use. For most projectors, this mount arm will also require an adapter plate to connect the projector to the arm. When using a Crimson AV adapter plate, attaching the plate to the mount arm is quick, simple, and secure.
Will this work with my projector mount?
This will work with most projector mounts with a 1.5" NPT specification.
Is this a projector mount?
No, this is a short throw wall adapter for a mount. You will still need to purchase or possess a projector mount as well.
Is this all I need to mount my projector?
No, you will also need the projector mount itself. This is just the short throw wall adapter.
Do I have to have a short throw projector?
Yes, this wall mount is designed specifically for short throw projectors.
What is a short throw projector?
A short throw projector is a projector designed for use in smaller rooms, because it can focus the image at a shorter distance.
Do you need a stud to mount this?
Yes, you need two studs for this mount. You can also mount to masonry or concrete.
Can this be adjusted when it's installed?
You can adjust the height slightly once installed.
How long is the extension arm?
The arm will extend 7.5 to 30 inches from the wall.
Crimson-AV JS2-30S Short Throw Projector Mount
Note: This product has been discontinued.
The Short Story
Short throw projectors were one of the most significant developments in home theater technology. By using a larger, wider lens- among other things- these projectors are capable of displaying sizable images at a short distance from the screen. This opens the door for many homeowners and presenters to use projectors in ways and spaces they wouldn’t have been able to use them before. They are becoming increasingly popular in small home theaters, offices, and even classrooms.
Mounting Matters
Because of the space limitations that often sway a user to purchase a short throw projector, mounting the projector is even more important. Mounting gets the projector out of the way and clears up space, while also presenting a clean and professional look. For many people, Crimson AV’s JS2-30S Short Throw Dual Stud Projector Mount is the perfect solution.
The JS2-30S is a mount arm for mounting a short-throw projector to two 16” on center wood studs or other surface materials such as concrete or cinder blocks. Having adjustment points is more important with a short throw projector than it is with a regular projector. Across a short space, changes to settings can make a huge difference. This projector mount has an arm that extends up to 30” from the wall. At the wall plate, you can also adjust the height by five degrees and the lateral position by 10 inches.
Crafted from aluminum and high-grade cold-rolled steel, the Crimson AV JS2-30S is rated for a projector weight of up to 50 lbs. Integrated cable management keeps the installation looking professional and the scratch-resistant finish helps preserve the sleek look of the mount through years of use. For most projectors, this mount arm will also require an adapter plate to connect the projector to the arm. When using a Crimson AV adapter plate, attaching the plate to the mount arm is quick, simple, and secure.
Will this work with my projector mount?
This will work with most projector mounts with a 1.5" NPT specification.
Is this a projector mount?
No, this is a short throw wall adapter for a mount. You will still need to purchase or possess a projector mount as well.
Is this all I need to mount my projector?
No, you will also need the projector mount itself. This is just the short throw wall adapter.
Do I have to have a short throw projector?
Yes, this wall mount is designed specifically for short throw projectors.
What is a short throw projector?
A short throw projector is a projector designed for use in smaller rooms, because it can focus the image at a shorter distance.
Do you need a stud to mount this?
Yes, you need two studs for this mount. You can also mount to masonry or concrete.
Can this be adjusted when it's installed?
You can adjust the height slightly once installed.
How long is the extension arm?
The arm will extend 7.5 to 30 inches from the wall.