Klein Tools VDV501-829 VDV Commander Test and Tone Kit
SKU#: VDV501-829
UPC#:92644582127
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Wiremap per TIA-568A/B Industry Standard
-
Identify Wiring Faults:
- Miswire
- Open
- Short
- Split-pair
- Reverse-pair
- Verify shielding
- Single-end cable testing or complete cable testing with Test-n-Map™ ID Remotes
- Detect the presence of PoE
- Detect class and test loads up to 25.5 watts
- Test to ensure adequate power for PoE device
- Test IEEE802.3af and IEEE 802.3at (PoE Plus) compliant Power over Ethernet systems
- Identify modes A or B (Ethernet pairs with power)
- Detect the presence of PoE
- Detect class and test loads up to 25.5 watts
- Test to ensure adequate power for PoE device
- Test IEEE802.3af and IEEE 802.3at (PoE Plus) compliant Power over Ethernet systems
- Identify modes A or B (Ethernet pairs with power)
- Detect active Ethernet current link speed, up to 1 Gbps
- Indicates advertised speeds 10/100/1000BASE-T half/full-duplex
- Save up to 256 cables or network tests
- Customize reporting with uuser-definednames
- Export and print color reports
- Features+
- Locate, test and measure coaxial, data (RJ45) and telephone (RJ11) cables
- Identify wiring faults including miswire, open, short, split-pair, reverse-pair and verify shielding
- Detect, identify and test Power over Ethernet (PoE)
- Measure cable length and distance to a fault with Time Domain Reflectometry (TDR) technology
- Measure paired-conductor cables up to 1,500 ft. (457 m) with accuracy of up to ±(5% and 1 ft./0.3 m)
- Single-end cable testing or complete two-end cable testing with Test-n-Map ID Remotes
- Perform active network (Ethernet) testing -- detect capabilities and connection speeds
- Visually identify a hub or switch and locate cable runs with Link Light
- Save up to 256 cable or network tests, export and print reports
- Reviews+
- Wiremap per TIA-568A/B Industry Standard
-
Identify Wiring Faults:
- Miswire
- Open
- Short
- Split-pair
- Reverse-pair
- Verify shielding
- Single-end cable testing or complete cable testing with Test-n-Map™ ID Remotes
- Detect the presence of PoE
- Detect class and test loads up to 25.5 watts
- Test to ensure adequate power for PoE device
- Test IEEE802.3af and IEEE 802.3at (PoE Plus) compliant Power over Ethernet systems
- Identify modes A or B (Ethernet pairs with power)
- Detect the presence of PoE
- Detect class and test loads up to 25.5 watts
- Test to ensure adequate power for PoE device
- Test IEEE802.3af and IEEE 802.3at (PoE Plus) compliant Power over Ethernet systems
- Identify modes A or B (Ethernet pairs with power)
- Detect active Ethernet current link speed, up to 1 Gbps
- Indicates advertised speeds 10/100/1000BASE-T half/full-duplex
- Save up to 256 cables or network tests
- Customize reporting with uuser-definednames
- Export and print color reports
- Locate, test and measure coaxial, data (RJ45) and telephone (RJ11) cables
- Identify wiring faults including miswire, open, short, split-pair, reverse-pair and verify shielding
- Detect, identify and test Power over Ethernet (PoE)
- Measure cable length and distance to a fault with Time Domain Reflectometry (TDR) technology
- Measure paired-conductor cables up to 1,500 ft. (457 m) with accuracy of up to ±(5% and 1 ft./0.3 m)
- Single-end cable testing or complete two-end cable testing with Test-n-Map ID Remotes
- Perform active network (Ethernet) testing -- detect capabilities and connection speeds
- Visually identify a hub or switch and locate cable runs with Link Light
- Save up to 256 cable or network tests, export and print reports
