- Description+
- Features+
- Ping Both IPV4 and IPV6 Addresses
- Test TCP/LDP Throughput
- Detects/Reports Advertised Link Speed and Link Duplex Capability
- Tests Presence of VLANs
- CDP/LLDP/NDP & VLAN ID Provides Network Configuration Info
- Ping Specific URLs to Verify WAN Connectivity
- Blinks Link Light to Identify Location on Hub/Switch/Router Port
- Display Network Devices & Associated IP Addresses
- 1 Year Manufacturer Warranty
- Specs+
- Measurement Technology: Time Domain Reflectometry (TDR)
- Cable Testing and ID: Up to 1000ft (305m)
- Split Pair Detection: 3ft (1m) to 1000ft (305m)
- Length Measurement: 0 to 1500ft (457m) (5%+1ft)
- Supports 8 Continuity and ID Number Remotes (RJ45)
- Supports 20 RJ45 and 20 F Connector ID Only Remotes
- Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) Compliant PoE
- Tests for Classes and Loads up to 25.5 Watts
- (At Class 4) Identifies Mode A or B (Pairs with PoE)
- Active Ethernet: Indicates Advertised Speeds of 10/100/1000base-T Half or Full Duplex. Can link to network at 10/100base-T.
- Max Voltage RJ Jack: 66VDC or 55 VAC, F Connector: 50 VDC or VAC. Refers to the max voltage that can be applied to any 2 connector pins without damaging the tester.
- Save Test Results: Stores up to 250 Cable or Network Tests with User Defined Names
- Tone Generation: Tone Frequencies 730 Hz and 1440 Hz
- Languages: English, French, Spanish
- Battery: 6 AA, 9VDC, 2200 mA-hr Alkaline Battery
- Operating Battery Life: Approximately 20 hours
- Storage Battery Life: Approximately 1.5 years
- Altitude: 10000ft (3048m) Operating
- Operating Temperature: 32° to 122°F (0° to 50°C)
- Storage Temperature: -22° to +140°F (-30° to 60°C)
- Humidity: 10 to 90% Non-Condensing
- Enclosure: High-Strength PC/ABS Plastic with VD Rating with Boot Withstands 4ft Drops onto Concrete
- Dimensions: 1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm)
- Weight: 1 lb 2 oz with Batteries
- Certifications: CE Listed
- Package Contents+
- Net Prowler Main Unit
- #1-5 Coax ID and Test Remote Set
- #1-5 Data ID Only Remote Set
- F Female to F Female Adapter F81
- Network/Tel-Test and ID Smart Remote #1
- No Fault Cables (2)
- Micro USB Cable
- Hanging Pouch
- Quick Start Guide
- User Manual (Online)
- Warranty Activation Card
- 6x Alkaline AA Batteries
- Reviews+
- Ping Both IPV4 and IPV6 Addresses
- Test TCP/LDP Throughput
- Detects/Reports Advertised Link Speed and Link Duplex Capability
- Tests Presence of VLANs
- CDP/LLDP/NDP & VLAN ID Provides Network Configuration Info
- Ping Specific URLs to Verify WAN Connectivity
- Blinks Link Light to Identify Location on Hub/Switch/Router Port
- Display Network Devices & Associated IP Addresses
- 1 Year Manufacturer Warranty
- Measurement Technology: Time Domain Reflectometry (TDR)
- Cable Testing and ID: Up to 1000ft (305m)
- Split Pair Detection: 3ft (1m) to 1000ft (305m)
- Length Measurement: 0 to 1500ft (457m) (5%+1ft)
- Supports 8 Continuity and ID Number Remotes (RJ45)
- Supports 20 RJ45 and 20 F Connector ID Only Remotes
- Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) Compliant PoE
- Tests for Classes and Loads up to 25.5 Watts
- (At Class 4) Identifies Mode A or B (Pairs with PoE)
- Active Ethernet: Indicates Advertised Speeds of 10/100/1000base-T Half or Full Duplex. Can link to network at 10/100base-T.
- Max Voltage RJ Jack: 66VDC or 55 VAC, F Connector: 50 VDC or VAC. Refers to the max voltage that can be applied to any 2 connector pins without damaging the tester.
- Save Test Results: Stores up to 250 Cable or Network Tests with User Defined Names
- Tone Generation: Tone Frequencies 730 Hz and 1440 Hz
- Languages: English, French, Spanish
- Battery: 6 AA, 9VDC, 2200 mA-hr Alkaline Battery
- Operating Battery Life: Approximately 20 hours
- Storage Battery Life: Approximately 1.5 years
- Altitude: 10000ft (3048m) Operating
- Operating Temperature: 32° to 122°F (0° to 50°C)
- Storage Temperature: -22° to +140°F (-30° to 60°C)
- Humidity: 10 to 90% Non-Condensing
- Enclosure: High-Strength PC/ABS Plastic with VD Rating with Boot Withstands 4ft Drops onto Concrete
- Dimensions: 1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm)
- Weight: 1 lb 2 oz with Batteries
- Certifications: CE Listed
- Net Prowler Main Unit
- #1-5 Coax ID and Test Remote Set
- #1-5 Data ID Only Remote Set
- F Female to F Female Adapter F81
- Network/Tel-Test and ID Smart Remote #1
- No Fault Cables (2)
- Micro USB Cable
- Hanging Pouch
- Quick Start Guide
- User Manual (Online)
- Warranty Activation Card
- 6x Alkaline AA Batteries
The TNP700 Net Prowler Tester from Platinum Tools offers all-in-one network testing, cable verification, cable troubleshooting and PoE voltage testing. Results can be viewed on the full-color display and saved and printed from a personal computer.
With the ability to test 10/100/1000 Base-T, IPV4/IPV6, VLAN, DHCP and more, the Net Prowler is a comprehensive tool to keep on hand. It generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.
The TNP700 Net Prowler Tester from Platinum Tools offers all-in-one network testing, cable verification, cable troubleshooting and PoE voltage testing. Results can be viewed on the full-color display and saved and printed from a personal computer.
With the ability to test 10/100/1000 Base-T, IPV4/IPV6, VLAN, DHCP and more, the Net Prowler is a comprehensive tool to keep on hand. It generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.
