Fluke JR-SYS-2 Jack Rapid Termination Tool for Systimax MGS400,MGS500,MFP420, and MFP520
SKU#: JR-SYS-2
UPC#:754082059233Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
Description+
JackRapid is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact to ols - with accuracy that's unmatched. The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step. Sim ple, one-handed operation, with an ergonomically designed handle, reduces hand fatigue. With JackRapid, you'll never punch into the palm of your hand or through drywall again.
Features+
- Strip cable jacket.
- Determine wiring scheme. Dress all 4 pairs (8 wires).
- Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.
- Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blads.
- Pull trigger completely and remove excess wire prior to releasing trigger.
- Wires will be seated and cut for a solid termination.
- Release handle and remove jack from JackRapid tool. Visually verify proper termination.
- JackRapid blade heads are specic to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!
Specs+
- Copper Type: PUNCHDOWN/IMPACT
- Type: COPPER
Reviews+
JackRapid is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact to ols - with accuracy that's unmatched. The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step. Sim ple, one-handed operation, with an ergonomically designed handle, reduces hand fatigue. With JackRapid, you'll never punch into the palm of your hand or through drywall again.
- Strip cable jacket.
- Determine wiring scheme. Dress all 4 pairs (8 wires).
- Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.
- Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blads.
- Pull trigger completely and remove excess wire prior to releasing trigger.
- Wires will be seated and cut for a solid termination.
- Release handle and remove jack from JackRapid tool. Visually verify proper termination.
- JackRapid blade heads are specic to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!
- Copper Type: PUNCHDOWN/IMPACT
- Type: COPPER
