Your Cart

Spend $100 Take 10% OFF with Code FALL10 - Free Shipping on Orders > $69.99 - *Some Exclusions May Apply

expand/collapse (704) 979-7100 (0)
  • image.alt
  • image.alt
  • image.alt
  • image.alt
  • image.alt
  • image.alt
  • image.alt
  • image.alt
  • image.alt
  • image.alt

HDMI over Cat6 Extender with IR - 164ft

SKU#: HDMI-SINGLE-EXTEND

UPC#:704438136484

60 Day Money Back Guarantee

100% Secure Shopping

warranty 1 year 1

1 Year Warranty

SKU#: HDMI-SINGLE-EXTEND

UPC#:704438136484
$65.38

SKU#: HDMI-SINGLE-EXTEND

UPC#:704438136484

SKU#: HDMI-SINGLE-EXTEND

UPC#:704438136484

60 Day Money Back Guarantee

100% Secure Shopping

warranty 1 year 1

1 Year Warranty

Same Day Shipping on orders placed in the next 00 hours 00 minutes 00 seconds.

Local Pickup May Be Available in Concord, North Carolina for more information..

Description+

HDMI Extender Over Cat6 Cable with Built-in IR (Up to 164ft at 1080p)

Limited by the distance of HDMI cables and need a cost-effective way to extend the length of your HDMI cable? FireFold's HDMI extender extends HDMI signals up to 164 feet using Cat6 cables with support up to 1080p. Built-in EDID pass-through allows display capabilities to be communicated. Constructed with a durable aluminum design with wall mountable cut outs for easy installation in any application, the HDMI extender features Full HD support and support for uncompressed audio outputs (LPCM, Dolby TrueHD, DTS Master Audio). IR control also allows you to easily control your source devices, such as Blu-ray players, television receivers, and other HDMI enabled devices.

Extending HDMI Cables through Cat6 Ethernet Cables

Designed as a solution for installations that require longer HDMI lengths, the HDMI-SINGLE-EXTEND uses Cat6 23AWG Ethernet cables to extend the length of a HDMI signal, with support for both video and audio up to 164 feet (50 meters) at 1080p (1920 x 1080) without any loss of quality.

Built-in EDID Pass-Through

The HDMI-SINGLE-EXTEND supports EDID (Extended Display Identification Data) pass-through. This allows display capabilities to be communicated, providing optimal resolution when sending content from the HDMI source to the display.

Plug and Play Operation

Setting up the HDMI extender is as easy as plugging in the HDMI source on the transmitter end and then plugging in the HDMI display on the receiver end. Plug in the included IR cables on both ends to allow the IR signal to be sent remotely, select the length of Cat6 or higher Ethernet 23AWG cable (up to 164 feet) to plug into the Ethernet port on both ends of the transmitter / receiver, and then plug in the included 5V 1A power adapters on both ends for operation.

For best performance, we recommend the use of Cat6 or higher 23AWG bare copper cables if running at the peak length of 164 feet. In practice, if you're running at distances up to 75ft, using Cat5e / Cat6 24AWG will not be an issue.

Features+

  • Extends HDMI and IR over a single Cat6 cable
  • 1080p resolution at up to 164ft using Cat6 23AWG cable
  • Supports all HDMI features including 1080p Full HD, deep color, lip sync, CEC and all multi-channel audio formats, including Dolby Digital Plus, 7.1 LPCM, Dolby TrueHD and DTS Master Audio
  • 2 x 5V DC power adapters included
  • Resolution: 480i/480p, 576i/576p, 720p, 1080i/1080p
  • HDCP compliant
  • Control devices via IR signal
  • Easy to use
  • Plug and Play, no drivers needed
  • Aluminum housing for durability
  • Includes sender unit, receiver, 2 x AC adapters, 1 x TX IR cable, 1 x RX IR cable
  • Power Consumption: 2W (max) each

Specs+

  • Supports Resolutions up to 1080p@50/60Hz
  • Supports IR Remote Control 20~60Khz
  • Power Consumption: Less Than 2W Each Unit
  • Dimensions: 71.6 x 66.6 x 24.8mm (LxWxH)
  • HDCP Compliant
  • IEEE-568B Standard
  • FCC, CE Listed
  • RoHS Compliant

Package Contents+

  • (1) HDMI to LAN Sender TX
  • (1) LAN to HDMI Receiver RX
  • (2) DC 5V 1A Power Adapters
  • (1) IR Blaster Extension Cable
  • (1) IR Receiver Extension Cable
  • (1) User Manual

Reviews+

Q&A+

Will this work through a Powerline adapter?

No, we do not suggest passing the signal through Powerline or other Ethernet-through-power extenders.

Will this work through a patch panel?

No, we do not suggest passing the signal through a patch panel.

Will this work through a keystone jack?

No, we do not suggest passing the signal through keystone jacks.

Can these be daisy-chained?

We do not suggest daisy-chaining HDMI extenders. Other options such as HDBaseT or HDMI over fiber may be more suitable to your purposes.

Is this HDCP compliant?

Yes, this is HDCP 1.3 compliant.

Does this support 3D and ARC?

This unit supports 3D but not ARC.

Do you need to plug this in for power?

Yes, both the transmitter and receiver need to be connected to an outlet or surge protector for power.

Does this come with the sender and receiver?

Yes, this kit comes with the sender and receiver. It does not come with a Cat6 cable or HDMI cables. You may need to purchase those separately.

Can this be used with an HDMI switch or splitter?

Yes, this product can be used with HDMI switches or splitters.

Can you use Cat5E instead?

Due to the amount of information passed through the single cable, Cat6 is necessary to guarantee data transmission.

Is this HDMI 2.0?

No, this is not HDMI 2.0.

Does this support 4K?

No, the maximum resolution supported by this product is 1080p.

Does this transfer audio and video?

Yes, HDMI is an audio and video cable.

Can I use this with Cat6 cables I made myself?

The tolerance for Cat6 in this application is fairly low, so we strongly suggest purchasing machine-terminated cables for this extender.

HDMI Extender Over Cat6 Cable with Built-in IR (Up to 164ft at 1080p)

Limited by the distance of HDMI cables and need a cost-effective way to extend the length of your HDMI cable? FireFold's HDMI extender extends HDMI signals up to 164 feet using Cat6 cables with support up to 1080p. Built-in EDID pass-through allows display capabilities to be communicated. Constructed with a durable aluminum design with wall mountable cut outs for easy installation in any application, the HDMI extender features Full HD support and support for uncompressed audio outputs (LPCM, Dolby TrueHD, DTS Master Audio). IR control also allows you to easily control your source devices, such as Blu-ray players, television receivers, and other HDMI enabled devices.

Extending HDMI Cables through Cat6 Ethernet Cables

Designed as a solution for installations that require longer HDMI lengths, the HDMI-SINGLE-EXTEND uses Cat6 23AWG Ethernet cables to extend the length of a HDMI signal, with support for both video and audio up to 164 feet (50 meters) at 1080p (1920 x 1080) without any loss of quality.

Built-in EDID Pass-Through

The HDMI-SINGLE-EXTEND supports EDID (Extended Display Identification Data) pass-through. This allows display capabilities to be communicated, providing optimal resolution when sending content from the HDMI source to the display.

Plug and Play Operation

Setting up the HDMI extender is as easy as plugging in the HDMI source on the transmitter end and then plugging in the HDMI display on the receiver end. Plug in the included IR cables on both ends to allow the IR signal to be sent remotely, select the length of Cat6 or higher Ethernet 23AWG cable (up to 164 feet) to plug into the Ethernet port on both ends of the transmitter / receiver, and then plug in the included 5V 1A power adapters on both ends for operation.

For best performance, we recommend the use of Cat6 or higher 23AWG bare copper cables if running at the peak length of 164 feet. In practice, if you're running at distances up to 75ft, using Cat5e / Cat6 24AWG will not be an issue.

  • Extends HDMI and IR over a single Cat6 cable
  • 1080p resolution at up to 164ft using Cat6 23AWG cable
  • Supports all HDMI features including 1080p Full HD, deep color, lip sync, CEC and all multi-channel audio formats, including Dolby Digital Plus, 7.1 LPCM, Dolby TrueHD and DTS Master Audio
  • 2 x 5V DC power adapters included
  • Resolution: 480i/480p, 576i/576p, 720p, 1080i/1080p
  • HDCP compliant
  • Control devices via IR signal
  • Easy to use
  • Plug and Play, no drivers needed
  • Aluminum housing for durability
  • Includes sender unit, receiver, 2 x AC adapters, 1 x TX IR cable, 1 x RX IR cable
  • Power Consumption: 2W (max) each
  • Supports Resolutions up to 1080p@50/60Hz
  • Supports IR Remote Control 20~60Khz
  • Power Consumption: Less Than 2W Each Unit
  • Dimensions: 71.6 x 66.6 x 24.8mm (LxWxH)
  • HDCP Compliant
  • IEEE-568B Standard
  • FCC, CE Listed
  • RoHS Compliant
  • (1) HDMI to LAN Sender TX
  • (1) LAN to HDMI Receiver RX
  • (2) DC 5V 1A Power Adapters
  • (1) IR Blaster Extension Cable
  • (1) IR Receiver Extension Cable
  • (1) User Manual

Customer Reviews

Based on 7 reviews
86%
(6)
14%
(1)
0%
(0)
0%
(0)
0%
(0)
J
J.
Works well with an occasional reboot

It works great in our location, though I had to setup a power timer adapter on each end to power cycle them once a week (Sundays at midnight). At first, the unit one end or the other would lock up after a few weeks of use. One is mounted behind a 55" TV in an air-conditioned conference room with the other mounted on the underneath side of the table in the same room. Neither were particularly easy to reach to power cycle them when one or the other was unresponsive. With the scheduled power restart they seem much more stable and work great.

R
R.
AWESOME !!!

From a camera projecting an event to a 3x3 video wall. Flawless. I used a 3 ft HDMI to the extender, a 3ft out to the video wall processor and it was AWESOME !! Over 100 people told me how this was the hit of the meeting... Great Recommendation.

c
c.c.
Great so far

Ordered 2 of these during Christmas sale making these I believe the best value of any similar solution. Only have 1 connected so far so time will tell durability. Worked immediately out of box.My set up is Directv box in my laundry/craft room to Firefold 1x2 edid splitter. 1 HDMI to local tv, other hdmi to this hdmi extender. Cat6 patch from the extender to cat6 wall plate with about 30ft run to central patch panel, another cat6 patch to another port on the panel that then makes about a 60ft run to master bath to a wall port and patch cord to the receiver unit of the extender. If there was a way for this not to work I should have found it with the multiple connections. But plugged it in and it worked perfect. Picture quality looks almost as good from native dtv box with no stutter or artifacts I have seen. IR works great as well...be sure to note there is a separate IR receiver and blaster so pay attention.

P
P.s.
Great Stuff!

I was skeptical at first about this product because for this package, most sites were selling something like this for way more. But I was installing an A/V system in a church on a budget and was told about this by from a friend. And let me say that I was highly impressed. Since, then I've bout several other things from Firefold.com and they haven't failed me yet.

T
T.
BETTER THAN EXPECTED

I BOUGHT THIS SO I COULD HAVE TV IN MY GARAGE WHICH IS A LONG WAY FROM MY TV IT WORKED GREAT OUT OF MY SPLITTER ALTHOUGH I DO WISH I COULD SPLIT MY PLAYSTATION 2 AND PLAY IT IN THE GARAGE WHILE I AM OUT THERE OH WELL

Will this work through a Powerline adapter?

No, we do not suggest passing the signal through Powerline or other Ethernet-through-power extenders.

Will this work through a patch panel?

No, we do not suggest passing the signal through a patch panel.

Will this work through a keystone jack?

No, we do not suggest passing the signal through keystone jacks.

Can these be daisy-chained?

We do not suggest daisy-chaining HDMI extenders. Other options such as HDBaseT or HDMI over fiber may be more suitable to your purposes.

Is this HDCP compliant?

Yes, this is HDCP 1.3 compliant.

Does this support 3D and ARC?

This unit supports 3D but not ARC.

Do you need to plug this in for power?

Yes, both the transmitter and receiver need to be connected to an outlet or surge protector for power.

Does this come with the sender and receiver?

Yes, this kit comes with the sender and receiver. It does not come with a Cat6 cable or HDMI cables. You may need to purchase those separately.

Can this be used with an HDMI switch or splitter?

Yes, this product can be used with HDMI switches or splitters.

Can you use Cat5E instead?

Due to the amount of information passed through the single cable, Cat6 is necessary to guarantee data transmission.

Is this HDMI 2.0?

No, this is not HDMI 2.0.

Does this support 4K?

No, the maximum resolution supported by this product is 1080p.

Does this transfer audio and video?

Yes, HDMI is an audio and video cable.

Can I use this with Cat6 cables I made myself?

The tolerance for Cat6 in this application is fairly low, so we strongly suggest purchasing machine-terminated cables for this extender.