ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess(TM) Technology, 12 fiber, 62.5 µm multimode (OM1)
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Fiber Type: OM1 62.5 MICRON MULTIMODE
- Cable Type: LOOSE TUBE
- Fiber Count: 12
- All-Dielectric: YES
- Armored: NO
- Rodent Protected: NO
- Self-Support: NO
- Cable O.D. (in.): 0.41
- Cable O.D. (mm): 10.5
- Max. Tensile Load Installation N: 2700
- Max. Tensile Load Long Term. N: 890
- Min. Bend Radius Installation (cm): 15.8
- Min. Bend Radius Installation (in.): 6.2
- Min. Bend Radius Long Term (cm): 10.5
- Min. Bend Radius Long Term (in.): 4.1
- No. of Fibers: 12
- Max. Tensile Load Installation (lb.): 600
- Max. Tensile Load Long Term. (lb.): 200
- Unspsc Code: 26121637
- Features+
- Specs+
- Reviews+
- Fiber Type: OM1 62.5 MICRON MULTIMODE
- Cable Type: LOOSE TUBE
- Fiber Count: 12
- All-Dielectric: YES
- Armored: NO
- Rodent Protected: NO
- Self-Support: NO
- Cable O.D. (in.): 0.41
- Cable O.D. (mm): 10.5
- Max. Tensile Load Installation N: 2700
- Max. Tensile Load Long Term. N: 890
- Min. Bend Radius Installation (cm): 15.8
- Min. Bend Radius Installation (in.): 6.2
- Min. Bend Radius Long Term (cm): 10.5
- Min. Bend Radius Long Term (in.): 4.1
- No. of Fibers: 12
- Max. Tensile Load Installation (lb.): 600
- Max. Tensile Load Long Term. (lb.): 200
- Unspsc Code: 26121637
ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable
Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG.
Applications: Aerial, Duct
Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.
Attributes
Contains FastAccess™ Technology
Innovative cable jacket feature reduces cable end access time by at least 50 percent and reduces overall risk of inadvertent fiber damage as well as risk to installers from sharp cable access tools.
Medium-density polyethylene jacket
Rugged, durable and easy to strip while providing superior protection against UV radiation, fungus, abrasion and other environmental factors.
Fully waterblocked loose tube all-dielectric gel-free design
Simple access and no clean up.
Industry-standard performance
Meets the requirements of Telcordia GR-20, Issue 3 and ICEA S-87-640.
Available in 62.5 µm, 50 µm, single-mode and hybrid versions
Ready for any application including Gigabit Ethernet and 10 Gigabit Ethernet.
ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable
Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG.
Applications: Aerial, Duct
Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.
Attributes
Contains FastAccess™ Technology
Innovative cable jacket feature reduces cable end access time by at least 50 percent and reduces overall risk of inadvertent fiber damage as well as risk to installers from sharp cable access tools.
Medium-density polyethylene jacket
Rugged, durable and easy to strip while providing superior protection against UV radiation, fungus, abrasion and other environmental factors.
Fully waterblocked loose tube all-dielectric gel-free design
Simple access and no clean up.
Industry-standard performance
Meets the requirements of Telcordia GR-20, Issue 3 and ICEA S-87-640.
Available in 62.5 µm, 50 µm, single-mode and hybrid versions
Ready for any application including Gigabit Ethernet and 10 Gigabit Ethernet.
