Lifetime Warranty

RJ11 Modular T1 Jack to 2 Jacks - FireFold

This is an RJ11 Female to Dual Female T adapter designed to connector two modular cables to a single cable. These adapters are designed for voice and telephone applications.

Kendall Howard 10-32 Rack Screws With Washers 50 Pack

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross-threading and guides the screw when being installed. Kendall Howard rack screws are cold-forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screwdriver or bit.

Vanco 180 Degree HDMI Right Angles

Strain is an HDMI cable’s worst enemy. Those tiny connectors are delicate and the digital signal can be complicated, but sometimes- especially when wall mounting your television- you don’t really have a choice. There’s a tight space and a cable needs to fit. The HDMI-ADPT-180 is designed to eliminate stress on your cable and port by creating the angle for you. This 180 degree adapter makes an upward or downward bend out of the back of your television. Then, you can effortlessly plug in your HDMI cable without the tension. Be sure to take a quick peek at the port on your TV or monitor, because sometimes ports can be situated horizontally or vertically and you may need a different adapter to make the turn you want.

As with any other FireFold product big or small, you can expect the highest quality for an incredible value. Gold-plated connectors ensure flawless play over time without worry about corrosion or degradation. The gripping notches on the ends make plugging and unplugging this adapter easy. The adapter also comes with FireFold’s Signature Lifetime Warranty which ensures your purchase is free from manufacturer defects for as long as you own it.

Cat6A Super-Slim Ethernet Patch Cable, UTP, Bare Copper, 32AWG

The Cat6A Super-Slim ethernet patch cable is a great solution to reduce congestion in high-density network environments. You can fit more cables in the same amount of space, increasing ventilation while maintaining a neat and organized install.

12ft RG-59 Coax Cable F-Type in Black

This 12ft RG59 coaxial cable has male F-connectors on both ends for connecting your audio/video devices. It has a pure copper center conductor, which provides corrosion resistance and maximum signal transfer with virtually no signal loss or interference.

A solid polypropylene insulator and an RF (radio frequency) copper braided shield wrapped in a flexible PVC jacket prevent center conductor migration for a true 75-ohm rating.

SC-SC Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single mode fiber is an optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize SC to SC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/1 Markers easily identify the connector on each end of the assembly
• Connectors utilize a UPC polish

Klein Tools VDV110-061 Coax Cable Stripper 2-Level, Radial

This cable stripper prepares multiple types of cable in common voice/data/video applications. It features an exclusive sliding depth gauge and variable stripping capability. The Klein Tools' coax cable radial stripper 2-level is made of high quality materials and construction for long-lasting results.

Cat6 U/FTP Flat Ethernet Network Cable, 30AWG

FireFold's Cat6 U/FTP Flat Ethernet Cables fit easily between cramped spaces, improving the look of your home or office due to their slim and easy-to-hide design. These flat cables fit perfectly under carpets, up walls, and even behind furniture and network equipment. The cables are a slim 0.11 inch (2.8mm) thick which allows plenty of ventilation room for network rack wiring. These flat shielded patch cables are designed to protect critical data from EMI (Electromagnetic Interference), which is known to degrade or even interrupt connectivity.

CAT6A Armored Patch Cable Anti-Rodent 28AWG

FireFold's armored patch cables are designed to resist outdoor weather conditions and protect connectivity and the cabling infrastructure from rodents, moisture and corrosion. The stainless-steel armored jacket is flexible and allows the cable to run through tight spaces where access is limited.

Applications:

• Factory Automation
• Harsh Environment Applications
• Industrial/ Commercial and Residential Installations
• PoE Installations

Cat6A Super-Slim Ethernet Patch Cable, UTP, Bare Copper, 32AWG

The Cat6A Super-Slim ethernet patch cable is a great solution to reduce congestion in high-density network environments. You can fit more cables in the same amount of space, increasing ventilation while maintaining a neat and organized install.

USB4 C-C 100W PD, 40Gbps, Fast Charge Braided Cable

Introducing the ultimate connectivity solution: the NetStrand 6ft USB4 Fast Charge Braided Cable. Designed to meet the demands of today's fast-paced digital world, this cable combines lightning-fast speeds, versatile compatibility, and unrivaled durability to keep you connected wherever you go.

Experience unparalleled speed with USB4 technology, delivering mind-blowing data transfer rates of up to 40Gbps. Whether you're transferring large files, streaming 8K video, or gaming at top speeds, this cable ensures smooth and seamless performance every time.

Power up your devices with confidence using our 100W Power Delivery (PD) capability. From laptops to smartphones, tablets to game consoles, this cable delivers reliable power to keep your devices charged and ready for action.

With Thunderbolt 4 compatibility, the USB4 Braided Cable expands your connectivity options even further. Connect to Thunderbolt 4-enabled devices for lightning-fast data transfer and power delivery, unlocking new possibilities for productivity and creativity.

But that's not all – our cable is also compatible with all USB-C devices, ensuring maximum versatility and convenience. Whether you're connecting storage devices, external SSDs, eGPUs, USB-C docking stations, industrial cameras, medical equipment, laptops, phones, game consoles, wearable devices, and more, our cable has you covered.

And for added convenience, our cable is backwards compatible with USB 3.1 Gen 1 and 3.1 Gen 2 devices, ensuring seamless connectivity with a wide range of peripherals and accessories.

Crafted with durability in mind, our cable features a braided design that provides enhanced strength and flexibility, making it perfect for everyday use. Say goodbye to tangled cables and unreliable connections – our cable is built to last, so you can stay connected wherever life takes you.

Upgrade your connectivity experience with the NetStrand Fast Charge USB4 Braided Cable. Whether you're a professional on the go or a tech enthusiast looking to future-proof your setup, our cable delivers the performance, compatibility, and reliability you need to stay ahead of the curve.

NetStrand Right-Angle 90° High Speed HDMI Cable

The NetStrand Right-Angle 90° High Speed HDMI Cable w/ Ethernet, 4K 60Hz 3840x2160 is designed for home theater enthusiasts looking to maximize viewing experience by delivering high definition, uncompressed digital video and audio all on one single cable to your LCD, LED, or Plasma television. Our premium grade HDMI cable is High Speed certified to unleash the full capability of your Blu-ray or HDMI enabled device (PS3, Xbox 360, Roku, HTPC). High Speed HDMI cables will fully handle 1080p video content and other technologies, such as 4K x 2K (resolutions higher than 1080p), 3D (HDTVs with 3D), and Deep Color. When delivering 1080p content and more, a High Speed HDMI cable is recommended over a Standard HDMI cable (Standard HDMI cables are limited to delivering only 1080i content). Our High Speed HDMI cables include an Ethernet channel, which integrates networking capabilities to the HDMI cable at speeds of up to 100 Mb/sec.

The NetStrand Right-Angle HDMI cables are used to conserve space. With a television mounted onto the wall, the space between the television and the wall can be limited, making it difficult to plug in a standard HDMI cable into the provided slots. With a Right-Angle HDMI cable, this issue is resolved because the HDMI connector end is set on a 90 angle, which, in addition, plug into the provided slots in the back of your television effortlessly.

Note: When installing in-wall, the National Electrical Code (NEC) has several ratings that are used to comply with local code requirements. CL2 and CL3 are common ratings used for in-wall requirements. Our HDMI cables are CL3 for in-wall installation.

RapcoHorizon NM1 Series XLR Microphone Cable

This series uses (2) 24 gauge bare copper center conductors and a serve shield for quiet operation. The outer jacket is a durable and flexible matte PVC compound. Available with authentic Swiss Neutrik XLR connectors

SC-ST Multimode Duplex 62.5/125 Fiber Optic Cable (1-15m)

• Used to connect patch panels and/or network devices that utilize duplex SC to SC style connectors and require OM1 62.5/125 multimode cabling.
• 100% tested
• Test report included in each cable

LC-ST 10 Gigabit Multimode Duplex 50/125 Fiber Optic Cable

These 10 Gigabit fiber optic cables are backward compatible with existing equipment. They feature almost three times the bandwidth of traditional 62.5/125 multimode fiber.

These OM3 fiber optic cables are constructed of high quality UPC polished ceramic ferrules and are 100% factory tested. Typically,10 Gigabit applications are run on 9/125 Singlemode fibers, which require costly laser transceivers. By utilizing these fiber optic cables, users are able to implement high speed, low cost Multimode transceivers or VCSEL's (Vertical Cavity Surface Emitting Lasers) resulting in greater overall system cost savings.

6ft DB9 Null Modem Cable - Female to Female

Serial, not Cereal

We are not talking about your breakfast cereal today. No! We are talking about serial technology. Serial communication has been used by computers for many years, though not as widely used in today’s market. When most people refer to serial, they think of the DB9 cable. It is referred to as DB9 because it carries 9 pins within it. DB9 was typically used for devices such as gamepads, mice, keyboards, or other such interface devices.

What we have here is a FireFold brand 6 foot DB9 female to female serial null modem cable. Null modems are usually used to connect DTE (data terminal equipment) like terminals or printers together using a RS-232 cable. Originally, the RS-232 standard was developed and used for teleprinter machines which could communicate with each other over phone lines. This was so that you would not have to use an actual modem for transferring of information between the two devices.

40 Inch SATA Serial ATA Cable

Connect your high-speed serial drive with our Serial ATA cables. Our Serial ATA cables support high-speed data transfer rates of up to 1.5Gbps over distances up to 3 feet. These narrower cables are simple to route, install and increase airflow resulting in a faster and cooler running PC.

Cat6A Shielded Patch 26AWG 10G Cable

FireFold’s Category 6 (CAT6A Ethernet Cable) shielded Ethernet cables are made to meet market standards and assure the best performance in today’s high-speed networks. CAT6a shielded cables are backwards compatible with any 10BaseT or 100BaseT network cards and hubs, allowing you to change out your old cables for these without having to change out your equipment.

Cat6a is the latest standard that can run up to a 600 MHz frequency, transferring up to 10-Gigabits through appropriate equipment. The Cat6a shielded cables still hold a 50-micron gold plated contact within the RJ45 connectors, just as all of FireFold’s Ethernet cables to help prevent corrosion. A boot rests upon each connector, helping prevent snags and damage to your cable.

These CAT6a shielded cables are constructed from four 26 AWG shielded twisted pair pure copper wire strands in a PVC cable casing. The SSTP (screen shielded twisted pair) wires of these Cat6a patch cables are twisted together to reduce cross talk and the individual pairs have shielding around them. The pairs as a unit have an additional braided screen around them.

With a variety of lengths available, you can get the perfect Cat6a patch cable to meet your needs and get your network setup with ease. You can run lengths of up to 328 feet with these cables.

NetStrand USB C to Lightning Fast Charge Cable

If you need to replace a lost or broken Apple lightning cable, it's important for you to know that you certainly aren't without your options. One of the best among them is the NetStrand MFi Certified USBC to Lightning Cable - a great alternative that is available in lengths of three to six feet for you to choose from depending on your needs.

This cable has been both MFi certified and licensed from Apple, meaning that it is truly the type of product that will stand the test of time. Backed by only the highest quality materials and an industry leading lifetime guarantee, you can have the peace-of-mind that only comes with knowing that your devices will charge as quickly and as reliably as possible today, tomorrow, five years from now and beyond.

IMPORTANT NOTE: Apple, iPod, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.

Quest B Connector Wire Splice - 100 Pack

If you ever find your back to the wiring wall, failure is not an option. To ensure success, we suggest you arm yourself with these TBN-1011 B-Connectors from Quest. With this 100-pack in your back pocket, those wires won’t even know what hit them.

We’ve heard them called “beans” or “beanies,” but they’re more than hot air. These crimp-style connectors can house up to four 19-26 AWG solid copper wires, and don’t let the word “crimp” give you second thoughts. There’s no need to purchase extra tools. That pair of pliers you already own? Those’ll do just fine. Installing B-connectors is lightning fast. There’s no stripping or prep needed. These connectors have teeth- literally. You just insert your wires and put the squeeze on the barrel. It’s lined with tons of tiny razor-sharp bits of metal that will pierce through the wire insulation for the conductivity you need and an iron grip. Outdoor environments are nothing to these, either. They’re filled with a non-curing sealant to keep out pesky moisture. So, go on. Splice in your house, at the office, or in your basement… No one ever has to know.

Kendall Howard 1U Black Flat Rack Mount Panel

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 1U. A U (unit) is the standard size for a single rack interval. While others can be 2U and 3U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 1.72 inches high, which is roughly standard for most patch racks.

Besides all this, you get a lightweight product that is just over a pound - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

3.5mm Stereo Male Quarter Inch Adapter

If you have a quarter-inch cable or plug that needs to be changed into a 3.5mm connection, you've come to the right place! This handy adapter allows you to easily convert a quarter-inch stereo plug into a 3.5mm jack. No software or power is required for this adapter. It is plug & play, and is super easy to use! It has nickel-plated contacts which means you will get the best conductivity possible. You can expect the highest quality with this product, and you just can't beat the price!

RCA Keystone Jack Beige Insert

This is a Beige RCA Keystone Insert. It has a molded plastic covering with an RCA port that passes through a signal. This product will install quickly and easily into a wall plate or patch panel and provide a convenient port to access in-wall cable.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

3 Unit Flanged Spacer Black

No more gaping spaces in your racks, with a FireFold Blank Panel you'll be able to tidy up your Server Racks, quickly and easily. Blank Panels may also be used for drilling and mounting specialized equipment or components.

3U

Also known as a Rack Unit, 3U is the amount of space provided within the Cabinet. A measurement of "3U" is 5.25 Inches

16 AWG Cold Rolled Steel

For this particular Blank Panel, the thickness is measured by AWG. A measurement of 16 AWG is equal to about 0.0598 Inches.

Kendall Howard 1902-1-001-01 1U Cable Routing Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 1U Cable Routing Blank provides the perfect way to route cables within a rack. With this simple device, cables can easily be managed within a cabinet, cutting back on time consuming maintenance as well as avoiding unwanted damage to cables and components.

This 1U cable routing blank is 19” EIA compliant, so you can use it with nearly any rack mount solution that you plan to use. Cable routing panel can be installed to safely direct cables from left to right or front to back. Of course, we recommend you use Kendall Howard with this piece of equipment for best results! However, it is not required. As long as the dimensions match up, you’ll be perfectly fine.

Details

This cable routing blank comes with seven, large open cut-outs that provide ample room for routing various cables such as copper, fiber optic, telecom, and power cables. When you have smaller cable bundle installations, the use of the included tool-less clips makes installation easy with universal cage nut style rails. For heavier cable bundles the use of rack screws and cage nuts are recommended.

As far as the cut-outs themselves, they come with rounded edges to allow for you to not have to worry about injury to yourself or equipment when installed. What possibly could you wish for more than this? Perhaps no injury to your wallet, I bet you’re saying. Well, this is FireFold. Of course your wallet will be feeling just fine afterwards!

ST-ST Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single-mode fiber is optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize ST to ST style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the connector on each end of the assembly

LC-SC Multimode Duplex OM2 50/125 Fiber Optic Cable (1-15m)

• Used to connect patch panels and/or network devices that utilize duplex LC-SC style connectors and require OM2 50/125 multimode cabling
• 100% tested
• Test report included in each cable

CAT3 Surface Mount Box with 1 Port

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space-saving design is easy to install and accommodates 2 or 4 wire Cat3 cable. Each surface mount comes individually packaged with screws and padded dual sided tape.

Cat6A Super-Slim Ethernet Patch Cable, UTP, Bare Copper, 32AWG

The Cat6A Super-Slim ethernet patch cable is a great solution to reduce congestion in high-density network environments. You can fit more cables in the same amount of space, increasing ventilation while maintaining a neat and organized install.

Mounting Questions

Where to mount the projector is one of the first questions new or prospective projector-buyers have to ask themselves. Desks, tables, and walls are all options but one of the most popular means for mounting a projector for display is to mount it on the ceiling. This method is frequently favored for the uncluttered and professional look it adds to any home theater or office. Much like mounting anything else, what you need depends on what you have to work with. There are just as many variations in ceilings are there are on walls and before you start any installation process you want to make sure you have everything you need to complete it. The Crimson AV E04 Fully Threaded Flush Mount Pipe is one piece of the ceiling mount puzzle you may need to complete your installation.

Keep it Up

The Crimson AV E04 is manufactured for use in attaching a projector ceiling mount to a ceiling adapter plate. When you want a close and flush look, the 4” length of this pipe is ideal. The finely machined external threading allows for the easiest and tightest installations possible. Crafted from quality steel and coated in a scratch-resistant epoxy powder, neither strain nor scrapes will wear this adapter down. It is rated to withstand weights of up to 500lbs.

Compatible with ceiling extensions, components, and accessories with a 1.5” NPT interface, the Crimson AV E04 threaded pipe will fit seamlessly with an almost endless combination of mounts, fittings, and fixtures. This flush mount pipe can be used with any of Crimson AV’s ceiling mounts and ceiling adapters to achieve the compact look you desire. It can also be used to connect to an extension arm for a more flexible fixture.

DVI Coupler, Female to Female Gender Changer - Side Look

Female to Female DVI

For connecting two male DVI ends together, you can’t go wrong with the DVI-FF-COUP. This professional coupler features two 24-pin DVI female jacks. It can be used with DVI-A, DVI-I, and DVI-D cables. These are most often used as connections from a desktop video card to a monitor or display. The machined pin threads provide a tight, secure slot for tightening down DVI cable screws. When the cables are firmly seated in place, this coupler can dependably hold the connection despite any pulling, tugging, or pressure. This adapter is capable of transferring analog or digital signals but it will not convert a signal from one to another. DVI is a video-only signal.

These DVI couplers can be used with any of FireFold’s DVI cables, splitters, or adapters for customized display solutions. In most cases, DVI cables can be run fairly long distances, so feel free to extend without worries. It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.

3.5mm Stereo Male to Dual 3.5mm Stereo Female Adapter

Sharing your music and video with a friend just got a lot easier and more affordable! This high-quality adapter allows you and your friend or family member to connect your headphones to the same device, as long as it has a 3.5mm connection. The adapter goes from a 3.5mm male TRS plug to dual 3.5mm female jacks. Built with quality in mind, optimal materials for shielding from signal interference, and a Firefold Lifetime Warranty make this adapter an easy choice for sharing your 3.5mm audio signal.

TriggerTack™ 1/4" x 5/16" Insulated Cable Staples (300 Pack)

Jonard Tools No. 19 1/4" by 5/16" black insulated cable staples are genuine Jonard fasteners, designed for use with the STG-100 TriggerTack™ wire and cable tacker. Each box has 300 pieces and is ideal for installing COAX RG59 Quad or RG6 wire. Is also perfect for Ethernet cables, telephone wires, TV cable, computer cable, intercom cable and security systems.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Smart and cost-effective solution for long distance transmission

Superior solution for long distance transmission in data centers, telecommunications, Fiber to the Home, video transmission, Fiber Optic Sensing, etc. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥55dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

Articulating Projector Ceiling Mount

Get all the bells and whistles with this universal fit projector ceiling mount! This mount fits most projectors weighing up to 22 pounds. It's ideal for installations in conference rooms, classrooms, healthcare facilities, or home theaters! With full articulating motion, you can achieve the perfect viewing angle. This mount tilts up to fifteen degrees upward or downward and rotates 360 degrees. You'll be able to project exactly where you need to.

Kendall Howard 2 Unit Flat Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 2U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 2U. A U (unit) is the standard size for a single rack interval. While others can be 3U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 3.47 inches high, which is roughly standard for most patch racks that have around 24 ports.

Besides all this, you get a lightweight product that is just below two pounds - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

ST-SC Multimode Duplex Plastic Fiber Adapter

This Fiber Optic Adapter is designed to connect two Fiber Optic cables with ST Multimode Duplex and SC Multimode Duplex connections. This adapter is a simple way to extend your fiber optic connection without purchasing a longer cable.

Serial communication has been used by computers for many years though it is not as widely used in today’s market. When most people refer to serial, they think of the DB9 cable.

It is referred to as DB9 because it carries 9 pins within it. There is also DB25 in the serial family too, which obviously carries 25 pins. DB9 was typically used for devices such as gamepads, mice, keyboards, or other such interface devices.

The StarTech NM9FF null modem adapter features two DB9 serial female connectors on either end to allow you to connect two male serial cables together. This is a great cost-saving way to convert a straight through cable into a null modem cable.

Null modems are usually used to connect DTE (data terminal equipment) like terminals or printers together using an RS-232 cable. Originally, the RS-232 standard was developed and used for teleprinter machines which could communicate with each other over phone lines. This was so that you wouldn’t have to use an actual modem for transferring of information between the two devices.

USB Type C Female to USB 3.0 Male Adapter

USB type C standard is here however there's may devices that still utilize USB type A out there. This USB A to USB C adapter is designed to convert your regular USB 3.0 female port on your PC/laptop to USB C female port to transfer data, pictures, files between your PC/Laptop and mobile devices that required type C connectivity.

Jonard Tools Flush Cut Plier

Jonard’s flush-cut pliers are made of high carbon SK5 steel and are heat-treated for maximum strength and durability.

Kendall Howard Light Duty Rack Shelf

The Kendall Howard 1U 6" Light Duty Rack Shelf is constructed of top-grade US steel. Rated to hold up to 45 lbs., this cantilever rack shelf is perfect for supporting monitors, switches, and other lightweight network or A/V equipment.

• 6" depth
• 45 lb. weight capacity
• 250 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Rack Screws With Washers

The Kendall Howard 12-24 Rack Screws with washers are not your everyday hardware store item. These superior, American-made, quality screws should be your only choice for securing rackmount devices such as shelves, cable managers, servers, and other networks, A/V, and electronic equipment.

• 0.75" in length
• 12-24 pilot point
• Phillips truss head
• RoHS compliant
• Made in the USA

Dependability, Reliability and Durability Rolled Into One

Anyone who has ever been on a job site can tell you that an extension cord is a lot more than it appears to be on the surface. It's one of those items that will prove its worth time and again - provided that you've got a high quality solution to turn to in the first place. When properly designed, an extension cord can be a productivity tool. It can be an essential installation accessory. It can be a safety item and a way to facilitate mission-critical communication across an environment, essentially all at the same time. When you've got a job that matches this type of description, you need to know that you can turn to the best - and "the best" is precisely what the Tripp-Lite extension cord is all about.

In a lot of ways, this is more than just another extension cord. It's a full six foot, medium duty power extension cord that allows you to effortlessly extend the length of any existing power cord that you're working with by an additional six feet in a matter of seconds. It features a rugged NEMA 5-15R receptacle and features a matching NEMA 5-15P plug. It was constructed from a high quality 16 AWG wire and is rated at 13 AMP, 120 volts.

Constructed entirely in North America, the Tripp-Lite extension cord is also RoHS compliant and is suited for all power cord applications that you may have. That includes use with not only your PC and monitor but also your server, your PDU, any universal power system that you may be working with an more. It features a sleek black color and three conductors that you can always rely on, making it more than suitable for any challenge that you may have ahead of you.

Note that when you order your Tripp-Lite extension cord directly from FireFold, you also get to enjoy a wide range of additional benefits that you won't find anywhere else. These include not only the best customer service in the industry and a 100% safe shopping experience but also a full lifetime warranty, fast and easy returns, a full 60 day money back guarantee and same day shipping (in most circumstances). Truly, it doesn't get much better than that.

Cat6 SSTP Industrial Outdoor Patch Cable

This Category 6 patch cable is designed for harsh industrial and residential environments where moisture and dust could be a factor. Built for outdoor installations, each pair is individually shielded and the cable is filled with a CMX-rated gel. The core conductors are constructed of 26 gauge pure copper stranded wire for maximum signal quality.

1ft Mini DVI to DVI and HDMI Adapter Cable - FireFold

Split your Mini-DVI signal into an HDMI display and a DVI display at the same time using this convenient adapter.

The 1ft cable allows you to position the adapter in the ideal place for your setup. This cable is constructed to maximize your signal quality and maintain data integrity.

SC-ST Singlemode OS2 Duplex 9/125 Fiber Patch Cable, UL, ROHS

Single-Mode - In optical fiber technology, single mode fiber is optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize ST to SC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the connector on each end of the assembly