15 Year Warranty

CAT6 Patch Panel - 12/24/48/96 Ports

Our Cat6 Patch Panel is designed to provide amazing performance and cable management. Each Cat6 Patch Panel comes with 110-type termination while meeting and exceeding TIA/EIA-568B.2/568B.2-1 Cat.6 ISO/IEC 11801 hardware specifications.

These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find a wire to fit.

Each patch bay is a high-density 19-inch panel.

Cat6 Cable by the Foot

Have the need for bulk cable, but don't need the whole box? FireFold has the answer for you! Bulk cable sold by the foot. This cable will be rolled out to your exact requested length.

Bulk (1000 ft) category 6 cable that has a bandwidth of 550 Mhz. The box is reinforced and allows for easy distribution of cable. Lining this cable is PVC material, which is durable yet flexible.

This cable offers speed. Since media is becoming very rich and on demand in today's networks, this extra bandwidth--nearly double of Cat5-- allows Cat 6 to be used on networks that are optimized for high bit rates.

Since bulk cable is normally used in intervals, the box that it comes in is almost as important as the cabling. Our boxes are reinforced to generally protect the cable. Also, they are easy to pull allowing the cable to be virtually kink less while being pulled out of the box.

PVC jackets are very common in networking cables and ours is no exception. This material is strong, protective, and flexible which are the characteristics desired in cables.

CAT6 Mini Patch Panel with 12 Ports

Tiny But Powerful

Our Cat6 Patch Panel is designed to provide amazing performance and cable management. Each Cat6 Patch Panel comes with 110-type termination while meeting and exceeding TIA/EIA-568B.2/568B.2-1 Cat.6 ISO/IEC 11801 hardware specifications.

Compared to standard patch panels, this mini patch bay weighs in at under a pound. It comes with its own mounting bracket, allowing you to easily get this IT patch panel up, out of the way, and ready to go.

Simple to Use

These IT patch panels are able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit. Plus, with entry access available from the top, bottom, and side - you can still easily access your cables once everything is setup.

Compacted Perfection

Each patch bay is a high-density panel design, made for saving space.

CAT6 Patch Panel Wall Bracket Combo

Our Cat6 Patch Panel is designed to provide amazing performance and cable management. Each Cat6 Patch Panel comes with 110-type termination while meeting and exceeding TIA/EIA-568B.2/568B.2-1 Cat.6 ISO/IEC 11801 hardware specifications.

These patch panels accommodate top, bottom, or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find a wire to fit.

Each patchbay is a high-density 19-inch panel and comes with a 1U wall mount bracket (48 port comes with a 2U bracket).

Cat6 Keystone Jack In 110 Style & Shielded - FireFold

The Cat6 Keystone Jack

The Cat6 jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568A/B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backwards compatible with all previous standards.

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots is in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the smooth trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant, and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. These specific keystones are also shielded, helping to prevent signal degradation and crosstalk.

You can find a variety of keystone wall plates with us, which allow you to customize easily what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Quality to Last a Lifetime

All FireFold keystone jacks come with a lifetime warranty. So, if something goes awry, and it is the product causing the issue, we’ll be more than happy to replace it for you - hassle free! Go ahead and get your hands on one, or many, of these today!

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat6A 24 Port Patch Panel With Support Bar 110 Type, UL

The FireFold 24Port Cat6A patch panel is used to build complex high-speed networks that required up to 10Gig speeds. The patch panel is 110 type and is compatible with TIA/EIA-568A and 568B standards.

Cat.6A supports up to 10Gig networks speeds.

 Cat5E Mini Patch Panel with 12 Ports

Tiny But Powerful

Our Cat5E Patch Panel is designed to provide amazing performance and cable management. Each Cat5E Patch Panel comes with 110-type termination while meeting and exceeding EIA/TIA TSB-40 Cat5E connecting hardware specifications.

This is one of our mini patch panels. Compared to the regular patch panel, this patch bay weighs in at under a pound. It comes with its own mounting bracket, allowing you to easily get this IT patch panel up, out of the way, and ready to go.

Simple to Use

Besides the 110 termination that this network patch panel offers, there are 12 individual Cat5E ports on the front side. Once you get your cables terminated on the one side, you just plug and go on the other. This is a very quick and easy solution for being able to swap out devices at any time. Plus, with numbered ports, you can easily keep track of what is plugged in where for better organization.

These IT patch panels are able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit.

Compacted Perfection

Each patch bay is a high-density panel design. The actual physical dimensions of this product are 10 inches by 2.25 inches by 1.75 inches, giving you plenty of space to work with after you get it set up.

These network panels meet TIA/EIA-568B.2/568B.2-1 Cat.5E ISO/IEC 11801 and EN 50173-1 specifications, so they are up to the latest standards. UL certified, they have been also tested to the highest standard for safety.