Wall Plates

Vanco Brush Bulk Cable Plate

This Bulk Cable Wall Plate from Vanco comes with a brush insert to help organize multiple cables. Provides a professional, finished look to your installation. Route your HDMI Cables and Audio/Video Cables for a home theater installation, or route network cables and VGA cables for a network Installation.

Vanco Keystone Plate Insert

This keystone insert fits into any decora-style wall plate for a stylish, professional look.

Houses your networking and home theater connectors to keep you organized.

Vanco Slim Bulk Cable Wall Plate

Simplify your cable installation with the WP-SLIMBULK from Vanco. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The minimum clearance for this plate is 1-3/16” and it is wide enough to accommodate the head of a VGA cable. The low, flattened profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

Slim Line Standard HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has 2 HDMI ports connected by a short cable. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

Vanco WPBWW Bulk Cable Wall Plate

Simplify your cable installation with Vanco’s WPBW. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The low 1-1/4” profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

Vanco White Decora Style Face Plate

Step Up to the Plate

Sometimes, when shopping for wall plates, you don’t find exactly what you’re looking for. It can be hard for manufacturers to offer every possibility- mainly because the possibilities are endless. One person may need coax, Ethernet, HDMI, and RCA while another wants nothing in the world more than a VGA, Optical, and RJ11 plate. Keystone plates are one option when it comes to custom wall plates, but they’re not the only choice you have. Decora wall plates were made famous by Leviton initially as a replacement for standard toggle light switches.

Decora the Halls

FireFold’s Decora-Style Face Plate can be used for the very same application, but they are also frequently used for low-voltage wiring. When combined with Decora inserts, the installer or homeowner can put together their ideal configuration. The WP-DECOR face plate has openings for the Decora insert of your choice. Inserts are available to accommodate between one and six keystone jacks each. We also offer a huge variety of home theater and networking keystone jacks that can be easily snapped into the insert ports. These plates follow industry standards, so they can be used with any inserts and keystones you already have.

Installing the WP-DECOR Decora-style face plate is simple. It fits over any standard low voltage bracket or box and attaches with the included color-matched screws. The smooth, glossy white finish helps it blend in easily with existing wall plates and décor, and the beveled edges ensure a clean and professional appearance. This plate is molded from dense, durable plastic and is backed by our signature lifetime warranty. Decora-style plates are also available from us with two and three insert openings.

Vanco 28146W Binding Post Decor Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-1P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to a bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with a single speaker. Installing and connecting the WP-1P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco Dual HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has dual HDMI cables. Each cable has 2 HDMI ports at either end. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

Vanco WP-4P-BIND Binding Post Wall Plate 

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-4P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with four speakers. Installing and connecting the WP-4P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

• (1) Vanco 28148W 4 Pair Binding Post Decor Wall Plate
• (2) Color Matching Screws

Vanco WP-2P-BIND Binding Post Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-2P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along the seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with two speakers. Installing and connecting the WP-2P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor faceplate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco HDMI Pigtail 3.5mm Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-3.5MM wall plate featuring an HDMI and a 3.5mm jack. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The lead-free HDMI pigtail is extremely flexible to help prevent any positional strain on the small pin connectors and it comes to you completely 3D-ready for seamless integration. The 3.5mm port can be used either for headphone-style stereo audio or for an IR extension connection.

Installing and connecting the WP-HDMI-3.5MM is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future. For basic installations, a drywall saw and a screwdriver are the only tools you will need. These plates do not require much clearance, so they are ideal for hiding behind equipment and televisions or anywhere else where space is an issue.

Vanco F Port Keystone Plate Insert

This keystone insert fits into any Decora-style wall plate for a stylish, professional look.

Houses your networking and home theater connectors to keep you organized.

Vanco USBWP5V Dual USB In-Wall Charger with AC

Tired of hunting down a USB charger every time your phone needs a boost? Hunt no more. This power outlet from Vanco features a regular tamper-resistant AC outlet, along with two USB ports for charging mobile devices. It's compatible with both Android and iOS devices, so no one gets left out. Plug your USB cable right into the outlet and you're charging!

This charger is designed to work with standard single gang trim plates. The USB outlets emit 2.4A of power, which is perfect for most phones, but tablets might require a little more juice. In that case, you'll want to use the USB charger that came with your device and connect it to the standard AC outlet. Installation does require some wiring, so you may want to consult an electrician for safety and effectiveness.

Slim HDMI Pigtail Component Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-COMP, a décor-style wall plate featuring HDMI and RGB red, green, and blue component jacks. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The lead-free HDMI pigtail is extremely flexible to help prevent any positional strain on the small pin connectors and it comes to you completely 3D-ready for seamless integration.

Installing and connecting the WP-HDMI-COMP is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor faceplate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco VGA Décor Wall Plate

Keep a professional look with this VGA decor style wall plate. It is engineered for optimal signal transfer and minimal signal loss, with gold plated contacts for maximum conductivity.

3 RGB Component Wall Plate

Vanco 2 Gang Blank Wall Plate

Into the Void

When it comes to home improvements, the sad- and sometimes frustrating- truth is that nothing is ever permanent. Floor plans shift, technology is updated, and tastes change. Regardless of whether your project has just started, just finished, or is stuck somewhere in between, maintaining a professional appearance is just as important as making life easier for yourself in the future. Wiring your home can be a messy project and it often leaves you with plenty of holes to cover. You’ve probably seen blank wall plates before and many people wonder what they are for. Wall plates are most often used to plug into in-wall wiring, but blank plates don’t have any openings. Why use one?

Fill in the Blank

Blank wall plates like FireFold’s WP-0-2GANG are used to cover the site of an old, unused connection, the site of a potential connection, or just the site of a hole left by construction. When time, effort, or future use is in question, blank wall plates provide an easy, inexpensive alternative to patching drywall. They create a clean, intentional look while keeping debris out of your stud bays. Which blank wall plate you need depends on your current décor and how large an opening you have to cover.

The WP-0-2GANG White Blank Plate is a white four-hole two-gang plate. Molded from UL listed impact resistant thermoplastic, this high-quality wall plate is solid and durable. It comes with four color-matched screws and fits over any standard two-gang box or bracket. The smooth, glossy finish matches most wall plates and the beveled edges keep the WP-0-2GANG low-profile and inconspicuous. Installing this plate over an existing box takes seconds and requires only a screwdriver. Replacing it later with another double-gang wall plate is just as simple. With a lifetime warranty, you can expect this blank plate to last through endless projects.

Vanco HDMI Component Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-RGBRCA, a wall plate featuring HDMI, RGB component video, and RCA audio jacks. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The HDMI port comes to you completely 3D-ready for seamless integration.

Installing and connecting the WP-HDMI-RGBRCA is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket much like any other wall plate. For basic installations, a drywall saw and a screwdriver are the only tools you will need. These plates do not require much clearance, so they are ideal for hiding behind equipment and televisions or anywhere else where space is a concern.

Vanco VGA and 3.5mm Wall Plate

Keep a professional look with this VGA and 3.5mm decor style wall plate. It is engineered for optimal signal transfer and minimal signal loss, with gold-plated contacts for maximum conductivity.

Vanco 2 Port Slim Line VGA to VGA Wall Plate

Keep a professional look with this two port VGA decor style wall plate. It is engineered for optimal signal transfer and minimal signal loss, with gold plated contacts for maximum conductivity.

Vanco 1 Gang Wall Plate 

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s HTWP62BW 6.2 Home Theater Connection Wall Plate is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is compatible with three-gang junction boxes and low voltage brackets and it includes a convenient bulk pass-through spout for your other home theater cables. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With six pairs of red and black binding post connections and two RCA subwoofer jacks, this wall plate is thorough and flexible.

Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note the subwoofer connections on the back side of this plate are screw-on F-style coax, not RCA. All jacks are gold-plated for the seamless signal passage and optimal sound.

Vanco Hinged Bulk Cable Wall Plate

Prepare for the unexpected with the 120617 bulk wall plate by Vanco. The patented design offers many advantages over a standard pass-through plate. A unique side-opening hinge allows the user to disconnect the top and bottom halves of this plate so it can be installed around a set of cables. This distinctive feature is especially useful when cables and equipment are already connected or when large connector ends such as VGA and DVI would ordinarily limit the number of cables that fit. The WP-HINGED attaches easily to any single gang low voltage box or bracket, and the pivoting joint requires no additional hardware. With a glossy, natural white shade, this bulk cable plate can create a professional look no matter the visibility.

Vanco SVGA Wall Plate with 3.5mm

Maintain a professional look to your install while keeping the cable clutter at bay with this VGA Wall Plate with 3.5mm Audio from Vanco. The sleek stainless steel finish matches any decor while providing an easy connection for your VGA and 3.5mm cables.

It installs in seconds. Just attach it to any single gang box or low voltage bracket with the included color-matching screws and you're done! No extra wiring is required, as the connections act as couplers between two cables. Just plug and play!