Volume Discounts

Vertical Cable 1000ft Solid Cat6 Bulk Cable 

Ideal for the more advanced networking installations, Vertical Cable's Cat6 Bulk Cable is a must-have for any extensive networking application where a higher bandwidth is called for.

Category 6:

The next step up from standard Cat5E cable, Category 6 (Cat6) is a "twisted pair" network cable used for carrying data signals at speeds of up to 550MHz of Bandwidth. This cable is preferred for more advanced networking installations where a higher bandwidth than normal is required.

PVC Jacket

Our Cat6 Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Cat6 Keystone Jack In 110 Style & UL Verified - FireFold

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wall plates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat5E Keystone Jack 110 Style - High Quality

The Cat5e Keystone Jack

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even a RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat6 Ethernet Patch Cable, Green

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

The Cat6A Keystone Jack

The Cat6A jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6A jack provided by Vertical Cable provides outstanding performance, exceeding the TIA/EIA-568-B.2-10 industry standard. Because of this standard, these Cat6a jacks support the operation of 10Gig Ethernet applications. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat6A jack comes with a standard RJ45 plug on the outside. Wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

These network jacks are designed with a shielded termination cap that minimizes additional AXT from neighboring connectors. They also feature twisted pair separation posts which minimize untwisting of pairs to allow for efficient installation and long-term peak performance.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant, and each is UL verified for quality and safety. These RJ45 jacks easily fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but also to allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wall plates with us, which allow you to customize easily what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Quality to Last a Lifetime

All FireFold keystone jacks come with a lifetime warranty. So, if something goes awry, and it is the product causing the issue, we’ll be more than happy to replace it for you - hassle free! Go ahead and get your hands on one, or many, of these today!

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Vertical Cable SKUs

• Almond 353-V2812/C6AAL
• Black 353-V2813/C6ABK
  
• Blue 353-V2814/C6ABL
• Gray 353-V2816/C6AGY
• Green 353-V2815/C6AGR
• Ivory 353-V2817/C6AIV
• Orange 353-V2818/C6AOR
• Red 353-V2820/C6ARD
• White 353-V2821/C6AWH
• Yellow 353-V2822/C6AYL

CAT6, 600MHz, Unshielded, Riser, With Spline

High-Performance CAT6 Cabling for Reliable Network Infrastructure

Build faster, more reliable networks with the Wavenet CAT6 600MHz CMR Riser Cable. Designed for commercial and residential structured cabling installations, this premium Category 6 cable features 23 AWG solid bare copper conductors, a riser-rated flame-retardant jacket, and support for Gigabit Ethernet applications. With performance rated up to 600 MHz, it's the ideal solution for data, voice, video, and PoE deployments.

Why You'll Love It

• 600 MHz Performance – Delivers the bandwidth needed for demanding network applications, including Gigabit Ethernet, VoIP, and IP security systems
• 23 AWG Solid Bare Copper Conductors – Provides superior conductivity, signal integrity, and reliable PoE performance compared to lower-grade alternatives
• CMR Riser Rated – Designed for vertical in-wall installations and floor-to-floor cable runs in commercial and residential buildings
• Easy-Pull 1000 ft Box – Convenient pull-box packaging simplifies installation and helps reduce cable waste
• Standards Compliant – Meets TIA/EIA-568-C.2 requirements and is ETL listed for dependable performance and code compliance.

Applications

• Gigabit Ethernet networks
• Office and commercial cabling
• PoE security cameras
• VoIP phone systems
• Wireless access points
• Educational facilities
• Data closets and telecom rooms
• Residential structured wiring

Built for Professional Installers

The Wavenet 6E04URXX4N combines high-speed performance, solid copper construction, and installer-friendly packaging to make every deployment easier. Whether you're wiring a new office, upgrading a school network, or deploying PoE devices throughout a facility, this CAT6 cable delivers the speed, reliability, and code compliance your project demands.

Cat6 Keystone Jack Toolless For Patch Panels - FireFold

The Cat6 Keystone Jack

The Cat6 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 Jack provided by FireFold provides outstanding performance, exceeding the ANSI/TIA/EIA-568-B.2 industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. These ethernet jacks are toolless. The unique toolless design does not require the use of a punch down tool. This can make things substantially faster when having to put many of these RJ45 jacks into place. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat5e Cable - Shielded Cable With 24AWG F/UTP 350MHz CMR

This Cat5E STP (Shielded Twisted Pair) cable is perfect for an indoor networking application in a noisy environment. This rating of cable contains a shielding designed to resist crosstalk and electromagnetic interference that comes with networking in close proximity to other cable sources.

Category 5E

Considered the Industry Standard for most network installations, Category 5E (Cat5E) is a "twisted pair" network cable used for carrying data signals at speeds of up to 350MHz of Bandwidth.

CMR-Rated PVC Jacket

Our Cat5E Solid Shielded Bulk Cable comes wrapped in a sturdy CMR-rated PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

24AWG Solid Bare Copper Conductors

For this particular cable, the gauge is 24 AWG, which is a diameter of about 0.0201 Inches, or 0.511mm. 24AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Vertical Cable 1000ft Solid Shielded Cat6 bulk Cable 

This F/UTP cable is perfect for any indoor networking application in a noisy environment. This rating of cable contains a shielding designed to resist crosstalk and electromagnetic interference that comes with networking in close proximity to other cable sources.

Category 6

The next step up from standard Cat5E cable, Category 6 (Cat6) is a "twisted pair" network cable used for carrying data signals at speeds of up to 550MHz of Bandwidth. This cable is preferred for more advanced networking installations where a higher bandwidth than normal is required.

PVC Jacket

Our Cat6 Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

FTP (foiled twisted pair)

This type of cable comes complete with a Foil Shielding, to protect the signal strength of the cable and ensure that there is no signal loss due to nearby electrical equipment, or cross-talk from additional cables in close proximity.

23 AWG

For this particular cable, the gauge is 23 AWG, which is a diameter of about 0.0226 Inches, or 0.573mm. 23AWG is the Industry Standard for any typical network cable installation. American Wire Guage (AWG) is the standardized gauging system for measuring wire sizes.

Solid Cable Design

Designed for more straight-forward, simple installation, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

RCA Keystone Jack White Insert 

This is a White - Yellow RCA Keystone Insert. It has a molded plastic covering with an RCA port that passes through a signal. This product will install quickly and easily into a wall plate or patch panel and provide a convenient port to access in-wall cable.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Green

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

1000ft Cat6A Shielded Solid Network Cable

Vertical Cable 064 Series 1000ft Cat6A 10GS Shielded Solid Network Cable is a high-performance data communications cable capable of 10GS high-speed applications. It is riser-rated for indoor use and arrives on a wooden spool. Sequential foot markings on the jacket allow quick and easy measuring and installation.

Benefits of Using the CAT6A F/UTP CMR – 064-700s Series

Choosing the CAT6A F/UTP CMR – 064-700s Series means you will benefit from a range of advantages, making it a perfect fit for those who require uncompromising reliability in their network cabling.

1. High-Speed Data Transmission- The CAT6A F/UTP CMR – 064-700s Series is designed to handle 10Gbps data rates with ease, fulfilling the needs of business-critical applications that require fast and efficient data processing capabilities. This cable is perfect for data centers, server rooms, and high-traffic building installations.
   
2. Enhanced Performance – This cable exceeds the performance standards set by ANSI TIA/EIA 568-C.2. You can rely on it for seamless connections, reduced crosstalk, and minimized interference, making it the ideal choice for high-density network environments.
   
3. Compatibility with Power over Ethernet (PoE)- The CAT6A F/UTP CMR – 064-700s Series supports PoE++ technology, allowing users to power devices through the same cable used for data transfer. This feature eliminates the need for additional wiring installations, simplifying network setups and reducing costs.
   
4. Easy Installation- The color-striped pairs within the cable provide straightforward identification during installation, reducing errors in wiring configurations. Whether you’re a professional installer or a DIY enthusiast, this user-friendly design makes it easier to get the job done quickly and efficiently.
   
5. Indoor-Only Suitable- As a CMR-rated cable, the CAT6A F/UTP CMR – 064-700s Series is specifically designed for indoor applications, adhering to safety regulations that prevent the spread of fire and smoke in multi-story buildings. This makes it a prudent choice for both residential and commercial installations.
   

Why Choose the CAT6A F/UTP CMR – 064-700s Series?

With the increasing demand for high-speed networks, the importance of reliable cabling solutions cannot be overstated. The CAT6A F/UTP CMR – 064-700s Series offers exceptional value, durability, and performance, making it the go-to option for both networking professionals and end-users. It is versatile enough for various applications while ensuring that your network infrastructure is future-proof, keeping pace with the demands of modern technology.

Don’t compromise your network’s potential; choose the CAT6A F/UTP CMR – 064-700s Series for superior data transmission, enhanced performance, and reliability you can count on. For more great options, visit our CAT6A CMR Riser category.

The Cat5e Keystone Jack - FireFold

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. These ethernet jacks are toolless. The unique toolless design does not require the use of a punch down tool. This can make things substantially faster when having to put many of these RJ45 jacks into place. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

2C/22 AWG STRANDED PVC 500FT COIL PACK

SCP's Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 stranded bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation of SCP Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with stranded conductor are available in 10 different PVC jacket colors. SCP security wire coil packs are great for security, alarm, and control installations. All SCP security wire coil packs are UL and Riser Rated.

Cat5e Cable - Vertical Cable Of 1000ft & Solid Plenum

Perfect for any networking application where Plenum Rated network cable is a requirement. FireFold's Cat5e Plenum Rated Bulk Cable is a must-have for any extensive networking installation.

Plenum (CMP) Rated PVC Jacket

Plenum rated Cat5E cable contains a flame retardant PVC jacket and is designed for cable runs being laid in spaces defined as "Air Plenums", this includes raised flooring systems, air handling ducts, etc. Plenum jackets produce less smoke than traditional PVC jackets.

Category 5

Considered the Industry Standard for most network installations, Category 5 (Cat5E, or Cat5) is a "twisted pair" network cable used for carrying data signals at speeds of up to 350MHz of Bandwidth.

Solid Cable Design

Designed for more straight-forward, simple installation, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

24 AWG

For this particular cable, the gauge is 24 AWG, which is a diameter of about 0.0201 Inches, or 0.511mm. 24AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

1000ft Solid Cat6 Plenum-Rated Bulk Cable - Made in the USA

Perfect for any networking application where Plenum Rated network cable is a requirement. FireFold's Cat6 Plenum-Rated Bulk Cable is a must-have for any extensive networking installation.

Plenum (CMP) Rated PVC Jacket

Plenum-rated Cat6 cable contains a flame retardant PVC jacket and is designed for cable runs being laid in spaces defined as "Air Plenums", this includes raised flooring systems, air handling ducts, etc. Plenum jackets produce less smoke than traditional PVC jackets.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

23 AWG

For this particular cable, the gauge is 23 AWG, which is a diameter of about 0.0226 Inches, or 0.573mm. 23AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

4C/22 AWG STRANDED PVC 500FT COIL PACK

SCPs Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 stranded bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation of our Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with stranded conductor are available in 10 different PVC jacket colors. Our security wire coil packs are great for security, alarm, and control installations. All of our security wire coil packs are UL and Riser Rated.

Vertical Bulk Cable 064 Series 1000ft Cat6A Solid Network Cable

Vertical Cable's 1000 foot Cat6A bulk cable is a must-have for extensive networking. This augmented UTP (unshielded twisted pair) cable is perfect for almost any networking application with high-speed devices. This Cat6A cable is suitable for 10GS high-speed applications and is designed for indoor installations. The 4-Pair conductors are easily identified with color striped pairs.This high-performance data cable is supplied on sturdy wooden spools.

Cat5E Ethernet Patch Cable Snagless in Green, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

CAT5E, 350MHz, Unshielded, Riser

Reliable Network Performance for Everyday Ethernet Installations

The Wavenet 5E04URXX4 CAT5e Riser Cable delivers dependable performance for voice, data, video, and Ethernet applications in residential and commercial environments. Featuring 24 AWG solid bare copper conductors and a riser-rated (CMR) jacket, this cable is designed for in-wall and vertical building runs while supporting Fast Ethernet and Gigabit Ethernet networks. Rated to 350 MHz, it provides the performance installers need at an exceptional value.

Applications

• Structured cabling systems
• Office and commercial networks
• VoIP phone systems
• IP security cameras
• Network printers
• Access control systems
• Gigabit Ethernet installations
• Residential networking

Why Choose Wavenet CAT5e CMR Cable?

Whether you're wiring an office, school, apartment complex, or home network, the Wavenet 5E04URXX4 offers the performance and reliability needed for today's connected environments. Its solid copper construction, riser-rated jacket, and 350 MHz capability make it an excellent choice for professional network installations that demand long-term performance without exceeding budget.

Fire Alarm Cable, FPLR (Riser), 18/2 - 1000ft Spool

Introducing the 214-2325/GR: High-Performance Access Control Cable

In today’s rapidly evolving world, securing our spaces is more critical than ever. With advancements in technology revolutionizing our approach to security, high-quality cabling has become a key component in any safety network. The 214-2325/GR is a premier access control cable, meticulously designed to meet the challenges of modern security systems. This 4-component cable is perfect for both professional installers and DIY enthusiasts, providing the reliability needed for various essential applications.

Why Choose the 214-2325/GR?

When it comes to security, compromising on quality is not an option. Here’s why the 214-2325/GR should be your go-to choice:

Exceptional Durability and Performance
The 214-2325/GR is built to endure. Constructed with robust materials, it withstands the rigors of both indoor and outdoor usage, making it perfect for comprehensive security systems in corporate offices, retail spaces, or residential homes.

Enhanced Signal Clarity
With its shielded design, the 214-2325/GR ensures your signals remain clear and uninterrupted—a critical feature in security applications, where reliable communication between devices is paramount.

Ease of Installation
Featuring rip cords, the 214-2325/GR simplifies the installation process. This user-friendly feature allows for easy removal of the outer jacket, making connection organization much simpler for professionals and novices alike.

Compatibility Across Devices
The versatility of the 214-2325/GR makes it an essential tool in your kit. Its broad compatibility with various security devices means you can operate multiple components efficiently, reducing your inventory costs and project overhead.

Applications

The 214-2325/GR is suitable for numerous applications, positioning itself as a preferred solution within the security and electronics sectors. Key applications include:

• Access Control Panels
  
• Security Panels
  
• Card Readers
  
• Sensors
  
• Keypads
  
• Power Supply
  
• Microphones
  
• Speakers
  
• Alarm Systems

Cat6A Slim Ethernet Patch Cable

The FireFold CAT6A Slim Line Ethernet cable is the solution to reduce congestion in high-density CAT6A Network environments, such as data centers,telecommunication, and server rooms. With the Cat6A Slim Line cable, you can fit more cables in the same space. The slim cable diameter is almost half that of a standard CAT6A cable.

Vertical Cable 500FT – CAT6, Plenum, MADE IN USA

23AWG, UTP, 4 Pair, Solid Bare Copper, 550MHz, Pull Box

2C/22 AWG SOLID COPPER PVC 500FT COIL PACK

Product Information

SCPs Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 solid bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation of SCP Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with solid conductor are available in 10 different PVC jacket colors. SCP security wire coil packs are great for security, alarm, and control installations. All SCP security wire coil packs are UL and Riser Rated.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.

Fire Alarm Cable, FPLP (Plenum), 18/2 - 1000ft Spool

Winnie Industries 3/4" Basic J Hook

3/4” Data Cabling J Hook

Part # WJH12

4C/22 AWG SOLID COPPER PVC 500FT COIL PACK

Product Information

SCPs Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 solid bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation SCP Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with solid conductor are available in 10 different PVC jacket colors. SCP security wire coil packs are great for security, alarm, and control installations. All SCP security wire coil packs are UL and Riser Rated.

Cat5E Bulk Cable - Plenum Cable In Solid Shield And Copper

The Shielded, Cat5E Plenum Cable 1000ft bulk amount, is a must-have for any indoor Plenum rated networking jobs in any noisy situation. This rating of cable is designed with a flame retardant FEP jacket along with an STP (shielded twisted pair) shielding manufactured to resist cross-talk and electromagnetic interference that comes with networking in close proximity to other cable sources.

Category 5

Considered the Industry Standard for most network installations, Category 5 (CAT5E, or CAT5) is a "twisted pair" network cable used for carrying data signals at speeds of up to 350MHz of bandwidth.

Plenum (CMP) Rated PVC Jacket

Plenum rated Cat5E cable contains a flame retardant PVC jacket and is designed for cable runs being laid in spaces defined as "Air Plenums", this includes raised flooring systems, air handling ducts, etc. Plenum jackets produce less smoke than traditional PVC jackets.

F/UTP

This type of cable comes complete with a foil and mylar tape shielding to protect the signal strength of the cable and ensure that there is no signal loss due to nearby electrical equipment, or cross-talk from additional cables in close proximity.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

24 AWG

For this particular cable, the gauge is 24 AWG, which is a diameter of about 0.0201 Inches, or 0.511mm. 24AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Cat8 S/FTP Shielded Ethernet Patch Cable, Green

FireFold now offers Cat8 Ethernet Network Cables. These cables are capable to reach up to 40Gbps transfer speeds and up to 2GHz bandwidth using copper conductors and RJ45 connectors. Cat8 Ethernet Cables are the first future proof, cost effective, high performance solution. Cat8 patch cables are backwards compatible with all categories: Cat5e, Cat6, Cat6A, and Cat7.

CAT6, 550MHz, Unshielded, Plenum, Without Spline

Premium Plenum-Rated CAT6 Performance for High-Density Network Installations

The Wavenet 6E04UPSPLSXX4N CAT6 CMP Cable is engineered for professional network environments where performance, safety, and installation efficiency matter most. Featuring 23 AWG solid bare copper conductors, Category 6 performance up to 550 MHz, and a plenum-rated CMP jacket, this cable is ideal for commercial buildings, schools, healthcare facilities, and data-intensive network deployments. Packaged in a convenient 1000 ft Reelex II pull box, this cable delivers smooth, tangle-free payouts that help reduce installation time and jobsite waste.

Why You'll Love It

• Plenum Rated (CMP) – Approved for installation in air-handling spaces, ceilings, and ducts where stringent fire-safety requirements apply
• 23 AWG Solid Bare Copper Conductors – Provides superior signal integrity, full PoE support, and reliable long-term network performance
• High-Speed CAT6 Performance – Supports bandwidth up to 550 MHz, making it ideal for Gigabit Ethernet, VoIP, IP cameras, and data networks
• Reelex II Pull Box – Designed for hassle-free cable pulls with reduced tangling and faster installations
• Code-Compliant & Certified – Meets industry standards including ANSI/TIA-568-C.2, CMP/FT6 requirements, and RoHS compliance

Applications

• Enterprise network infrastructure
• Commercial office buildings
• Data centers
• Schools and universities
• Healthcare facilities
• IP surveillance systems
• VoIP phone deployments
• Wireless access points
• Structured cabling projects

Built for Professional Installers

Whether you're outfitting a data center, running cable through plenum ceilings, or deploying a large-scale commercial network, the Wavenet CAT6 CMP cable provides the performance, reliability, and code compliance required for today's demanding network environments. Its solid copper construction and installer-friendly Reelex packaging make it a trusted choice for low-voltage professionals.

ABA Elite CAT6E UTP CMR Solid Cable 24AWG

ABA Cat6e CMR cable is constructed with high quality materials and meets EIA and TIA standards. These cables have gone through a variety of checklists from UL, ETL, EIA, TIA, etc. before it sets out into the market. The Cat6e riser cable is built with a spline (noise reducing cross separator) in the middle, separating each twisted pair. The spline produces a better performance against near end crosstalk within. The cabling is packaged in Reelex II pull boxes, which eliminates the worry for any twists or knots during pulls. This product features 100% solid copper conductors making it the best choice for conductivity performance. The Cat6e riser cable is UTP (unshielded twisted pair) and has a sweep frequency of up to 600MHz. Riser cables are intended for installation inside walls, risers, or between the floors of your home or business. Connect your favorite devices with speeds up to a1GB data rate.

• U/UTP, 24AWG solid bare copper, CAT.6E CMR.
• With cross filler.
• With rip cord.

Application

• Structure cabling for horizontal and building backbone cable.
• Transmission of digital and analogue for data, video and audio application.
• IEEE 802.3ab 1000BASE-T, 1000BASE-TX and legacy speeds
• CDDI / ATM / Token Ring.
• IEEE 802.3af (PoE) / IEEE 802.3at (PoE+)
• EtherCAT Industrial standard.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

WarriorWrap 7mil Select Vinyl Electrical Tape, 60ft

APPLICATIONS

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing
• Used for jacketing on high voltage splices

Commscope Cat6 Solid Bare Copper

CS34R ETL Verified Category 6 U/UTP Cable, non-plenum, 4 pair count, 1000 ft (305 m) length, CommPak

Vertical Cable 1000ft Solid Shielded Plenum CAT6 Cable Bare Copper

The Shielded, Plenum 1000 foot Cat6 Bulk Cable is a must-have for any indoor Plenum rated networking jobs in any noisy situation. This rating of cable is designed with a flame retardant FEP jacket along with an F/UTP (Foiled Unshielded Twisted Pair) shielding manufactured to resist cross-talk and electromagnetic interference that comes with networking in close proximity to other cable sources.

Category 6

Considered an Industry Standard for most network installations, Category 6 is a "twisted pair" network cable used for carrying data signals at speeds of up to 550MHz of bandwidth.

Plenum (CMP) Rated PVC Jacket

Plenum rated Cat6 cable contains a flame retardant PVC jacket and is designed for cable runs being laid in spaces defined as "Air Plenums", this includes raised flooring systems, air handling ducts, etc. Plenum jackets produce less smoke than traditional PVC jackets.

F/UTP (Foiled Unshielded Twisted Pair)

This type of cable comes complete with a foil and mylar tape shielding to protect the signal strength of the cable and ensure that there is no signal loss due to nearby electrical equipment, or cross-talk from additional cables in close proximity.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

23 AWG

For this particular cable, the gauge is 23 AWG. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

CAT5E, 350MHz, Unshielded, Plenum

Plenum-Rated Performance for Professional Network Installations

The Wavenet 5E04UPXX4 CAT5e Plenum Cable is engineered for high-performance network installations in commercial buildings, schools, healthcare facilities, and other environments requiring CMP-rated cabling. Featuring 24 AWG solid bare copper conductors and a plenum-rated jacket, this cable delivers dependable Gigabit Ethernet performance while meeting stringent fire safety requirements for air-handling spaces.

Key Benefits

• CMP Plenum Rated – Approved for installation in plenum spaces and air-return ceilings where fire safety and low-smoke performance are required
• 350 MHz Performance – Supports voice, data, video, and Gigabit Ethernet applications with reliable signal transmission
• 24 AWG Solid Bare Copper Conductors – Provides superior conductivity and long-term reliability for professional-grade installations
• Supports Gigabit Ethernet – Compatible with 10/100/1000 Mbps networks, VoIP systems, IP cameras, and other modern applications
• Easy-Pull 1000 ft Reelex Box – Installer-friendly packaging helps reduce tangles, waste, and installation time.

Applications

• Structured cabling systems
• Commercial office networks
• Schools and universities
• Healthcare facilities
• VoIP phone systems
• IP security cameras
• Access control systems
• Data, voice, and video distribution

Why Choose Wavenet CAT5e Plenum Cable?

When your project requires cabling in air-handling spaces, Wavenet's CAT5e CMP cable delivers the safety, compliance, and performance you need. Its plenum-rated construction helps limit smoke and flame propagation while providing reliable connectivity for today's networking applications. Whether you're wiring an office, school, hospital, or data room, this cable is built to meet professional standards.

ICC 600MHz CAT6e Bulk Cable With 23 AWG UTP Solid Wires

ICC’s CMR UTP Solid cables are manufactured based on the TIA 568-C.2 industry standard and are UL and cUL listed and verified. Available in spools of 1000 feet in a convenient pull box dispensing carton. Constructed with sequential footage markings on the outer jacket for easy-to-measure usage tracking. These cables offer a competitive solution designed to provide the ultimate performance necessary for today’s demanding voice, data, video, and security applications in commercial and residential installations.