Unshielded

ALTOS® Lite™ Loose Tube, Gel-Free, SingleJacket, Single-Armored Cable

6 F, Single-mode (OS2)

Corning Cable Systems ALTOS® Lite™Gel-Free, SingleJacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations. The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water -swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.

ALTOS Lite Loose Tube, Gel-Free, Single-Jacket, Single-Armored Cables w/ FastAccess Technology12 F, SMF-28 Ultra fiber, Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct

Corning ALTOS Lite gel-free, single-jacket, single-armored cables with FastAccess technology are designed for direct-buried installations. The innovative FastAccess technology feature combined with the gel-free loose tube design simplifies removal of t he cable jacket and accessing the buffer tubes. The gel-free design means the cables are fully waterblocked using craft-friendly water-swellable materials which makes cable access simple and require no clean up. The loose tube design uses Corning's SMF- 28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation a nd environmental rigors while allowing easy midspan access. The single-armored construction provides additional crush and rodent protection. These cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 6
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.41
• Cable O.D. (mm): 10.5
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 15.8
• Min. Bend Radius Installation (in.): 6.2
• Min. Bend Radius Long Term (cm): 10.5
• Min. Bend Radius Long Term (in.): 4.1
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric 144 fiber Cable

FastAccess(TM) Technology, Single-mode (OS2), max. attenuation 0.4 dB/km

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 144
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.62
• Cable O.D. (mm): 15.8
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 23.7
• Min. Bend Radius Installation (in.): 9.3
• Min. Bend Radius Long Term (cm): 15.8
• Min. Bend Radius Long Term (in.): 6.2
• No. of Fibers: 144
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

FREEDM® One Tight-Buffered Cable - Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser, Plenum

Corning FREEDM One plenum cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: PLENUM
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.21
• Cable O.D. (mm): 5.3
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 8.0
• Min. Bend Radius Installation (in.): 3.0
• Min. Bend Radius Long Term (cm): 2.7
• Min. Bend Radius Long Term (in.): 1.0
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

FREEDM® One Tight-Buffered Cable -  Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser

Corning FREEDM One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The s mall diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding o r bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: RISER
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.22
• Cable O.D. (mm): 5.5
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 8.3
• Min. Bend Radius Installation (in.): 3.2
• Min. Bend Radius Long Term (cm): 5.5
• Min. Bend Radius Long Term (in.): 2.2
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

MIC® Tight-Buffered Plenum Cable - Single-mode (OS2)

Applications: General Purpose Horizontal, Vertical Riser, Plenum

Corning MIC interlocking armored plenum cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use individually jacketed 900 um buffered fibers enabling easy, consistent stripping and facilitating termination. The fibers are grouped into jacketed subunits and surrounded by a dielectric central member.

The core is protected by a flexible, spirally wrapped, aluminum interlocking armor that offers easy, one-step installation and up to seven times the crush protection of unarmored cables. With a flame-retardant outer jacket, this cable is particularly useful for heavy traffic or more challenging mechanical exposure conditions and applications requiring extra rugged cables.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: PLENUM
• Armored: YES
• Cable O.D. (in.): 0.48
• Cable O.D. (mm): 12.2
• Max. Tensile Load Installation N: 440
• Max. Tensile Load Long Term. N: 132
• Min. Bend Radius Installation (cm): 18.3
• Min. Bend Radius Installation (in.): 7.2
• Min. Bend Radius Long Term (cm): 12.2
• Min. Bend Radius Long Term (in.): 4.8
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 100
• Max. Tensile Load Long Term. (lb.): 30
• Unspsc Code: 26121607

Altos loose Tube, Gel-free - Single-mode (OS2)

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 72
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 48
• All-Dielectric: YES
• Armored: NO
• Unspsc Code: 26121637

Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 12
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

FREEDM One Tight-Buffered Cable 4 F Single-mode

4 F, Single-mode (OS2)

Corning FREEDM® One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial, duct and direct-buried applications with no need for a transition splice when entering the building. The tight buffered construction facilitates easier termination for low -fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 μm TBII® buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Cable Type: TIGHT BUFFERED
• Fiber Count: 4
• Fire Rating: RISER
• All-Dielectric: NO
• Armored: NO
• Rodent Protected: NO
• Unspsc Code: 26121607

24-F ALTOS GEL-FREE CBL W/ FASTACCESS TECH CABLE

Corning Cable Systems ALTOS^® Lite™ Gel-Free, Single-Jacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations.

The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water-swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 24
• All-Dielectric: NO
• Armored: YES
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637