Under $25

SCP-EasyFiber Premium Mechanical Prepolished Connectors

SCP-EasyFiber® Premium Mechanical Prepolished Connectors for 250m/900m Distribution and 2.0mm Duplex Zip/Shotgun Cable Construction.

SCP-EasyFiber® Field Installable Connectors are used to terminate optical fiber cable without all the fuss. Field Installable means that the termination can easily be done at the jobsite. For LAN, AV, MDU, FFTH/FFTD and most other applications, high quality mechanical connectors are usually the preferred choice by integrators as they have lower initial investment costs; and are faster/easier to terminate in the field. These are professional level, premium performance connectors with very low terminated signal loss and reflection. These connectors provide fast terminations comparable in time to RJ45 termination.

SCP-EasyFiber OS2 9/125 Mechanical Prepolished Connectors

SCP-EasyFiber® Premium Mechanical Prepolished Connectors for 250m/900m Distribution and 2.0mm Duplex Zip/Shotgun Cable Construction.

SCP-EasyFiber® Field Installable Connectors are used to terminate optical fiber cables without all the fuss. Field Installable means that the termination can easily be done at the job site. For LAN, AV, MDU, FFTH/FFTD, and most other applications, high-quality mechanical connectors are usually the preferred choice by integrators as they have lower initial investment costs; and are faster/easier to terminate in the field. These are professional-level, premium-performance connectors with very low terminated signal loss and reflection. These connectors provide fast terminations comparable in time to RJ45 termination.

LC/UPC SM Mechanical Connector, blue - 1ea/Bag

Simply – LC/UPC Premium single-mode mechanical reusable connector with high clarity matching gel for 250/900µm fiber, blue – 1ea/Bag

SCP-EasyFiber Premium Mechanical Prepolished Connectors

SCP-EasyFiber® Premium Mechanical Prepolished Connectors for 250m/900m Distribution and 2.0mm Duplex Zip/Shotgun Cable Construction.

SCP-EasyFiber® Field Installable Connectors are used to terminate optical fiber cable without all the fuss. Field Installable means that the termination can easily be done at the jobsite. For LAN, AV, MDU, FFTH/FFTD and most other applications, high quality mechanical connectors are usually the preferred choice by integrators as they have lower initial investment costs; and are faster/easier to terminate in the field. These are professional level, premium performance connectors with very low terminated signal loss and reflection. These connectors provide fast terminations comparable in time to RJ45 termination.

SCP Simplex Single-Mode Fiber Optic Keystone Jack

SCP Snap-In Fiber Keystone Jack Couplers (female to female) are compact designed allowing 24 fiber keystone jack couplers to comfortably fit side by side in a 1RU 24 port patch panel. Compatible with most Keystone wall plates, patch panels, surface mount and media outlet boxes. UL listed.

SCP Simplex SC/APC Single-Mode Fiber Keystone Jack

SCP Snap-In Fiber Keystone Jack Couplers (female to female) are compact designed allowing 24 fiber keystone jack couplers to comfortably fit side by side in a 1RU 24 port patch panel. Compatible with most Keystone wall plates, patch panels, surface mount and media outlet boxes. UL listed.

SCP Duplex LC To LC Single-Mode Fiber Optic Keystone Jack

SCP Snap-In Fiber Keystone Jack Couplers (female to female) are compact designed allowing 24 fiber keystone jack couplers to comfortably fit side by side in a 1RU 24 port patch panel. Compatible with most Keystone wall plates, patch panels, surface mount and media outlet boxes. UL listed.

DINSpace SNAP Splice Pigtail with 1ea. Singlemode ST Simplex Adapter, 3ft

DINSpace SNAP Splice Pigtail with 1ea. Singlemode SC Simplex Adapter, 3ft

DINSpace SNAP Splice Pigtail with 1ea. Singlemode LC Simplex Adapter, 3ft

DINSpace SC/SC Singlemode (9/125) Duplex Fiber Patch Cable

DINSpace ST/SC Singlemode (9/125) Duplex Fiber Patch Cable

DINSpace ST/ST Singlemode (9/125) Duplex Fiber Patch Cable

ICC Fiber Optic SC Adapter Panel

The ICC ICFOPC26BK SC Fiber Optic Adapter Panel is a 6 duplex panel with ceramic sleeves. It is a secure means to connect fiber optic cables between components.

ICC SC Fiber Optic Adapter Panel

The ICC ICFOPS26BK SC Fiber Optic Adapter Panel is a 6 simplex or 3 duplex panels with ceramic sleeves. It is a secure means to connect fiber optic cables.

ST-ST Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single-mode fiber is optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize ST to ST style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the connector on each end of the assembly

SC-ST Singlemode OS2 Duplex 9/125 Fiber Patch Cable, UL, ROHS

Single-Mode - In optical fiber technology, single mode fiber is optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize ST to SC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the connector on each end of the assembly

LC-ST Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single-mode fiber is optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize LC to ST style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the connector on each end of the assembly

SC-SC Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single mode fiber is an optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize SC to SC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/1 Markers easily identify the connector on each end of the assembly
• Connectors utilize a UPC polish

LC-SC Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single mode fiber is optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize LC to SC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the connector on each end of the assembly
• Connectors utilize a UPC polish

LC-LC Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single mode fiber is an optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize LC to LC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the TX and RX connector on each end of the assembly

Fiber Enclosure Panel - 6 Single Mode Simplex SC/APC

Note: This product has been discontinued.

TechLogix's ECO Series of rack-mount distribution panels and wall-mount enclosures provide a professional solution for fiber optic cable management.

The ECO Series is customizable based on the quantity of fiber optic strands and connector types:

Choose your enclosure style -- either rack tray or wall-box
Choose your enclosure size -- from 1 panel slot up to 12 panel slots
Choose your enclosure panels -- options include both single mode and multimode LC, LC/APC, SC, SC/APC and ST
All products are manufactured with durable powder-coated steel and feature quick-connect push pin mounting tabs.

Custom options and non-standard sizes are available. Please contact TechLogix for additional information.

Fiber Enclosure Panel with 6 Single Mode Simplex SC

Note: This product has been discontinued.

TechLogix's ECO Series of rack-mount distribution panels and wall-mount enclosures provide a professional solution for fiber optic cable management.

The ECO Series is customizable based on the quantity of fiber optic strands and connector types:

Choose your enclosure style -- either rack tray or wall-box
Choose your enclosure size -- from 1 panel slot up to 12 panel slots
Choose your enclosure panels -- options include both single mode and multimode LC, LC/APC, SC, SC/APC and ST
All products are manufactured with durable powder-coated steel and feature quick-connect push pin mounting tabs.

Custom options and non-standard sizes are available. Please contact TechLogix for additional information.

Techlogix Networx Armored Duplex Single Mode OS2 3.0mm Fiber Patch Cord

Note: This product has been discontinued.

Look, everyone knows lasers are cool. You can blow holes in university statues or destroy homes with popcorn. If you fancy yourself a 'real genius' you can even use them to transport data! The best way to contain those beams into something really useful is to shoot them down a TechLogix Networx Fiber Optic patch cable.

The 9/125 micron OS2 single mode fiber optic cable is suitable for higher bandwidth applications, such as in data centers, telecom rooms, server farms, cloud storage networks, and any place fiber jumper cables are needed. It meets RoHS compliant and cable is optically tested for insertion loss to ensure high quality.

These armored fiber optic cables feature a built-in metal stainless steel tube to provide stronger protection of the optical fibers than standard fiber optic cables. The rugged armored cables allow optical fiber to be installed in the most hazardous areas, including environments with excessive dust, oil, gas, moisture, or even pesky rodents. Even though they are armored, a flexible 30mm bend radius and light-weight tubing makes them easy to install.

Techlogix Networx Fiber Optic OS2 SC to SC Coupler

Note: This product has been discontinued.

'Get out the cable stretcher!'  This is a mildly humorous prank to play on a greenhorn cable installer, but sometimes, don't you wish you actually had one?

Fiber couplers (sometimes called adapters) are a simple and stable way of extending your fiber optic cable or creating a service point at a patch panel.

These are also great for coupling your bulk fiber installation cable to a patch cable which will increase the longevity of the install cable.

Techlogix Networx Fiber Optic OS2 LC to LC Coupler

Note: This product has been discontinued.

'Get out the cable stretcher!'  This is a mildly humorous prank to play on a greenhorn cable installer, but sometimes, don't you wish you actually had one?

Fiber couplers (sometimes called adapters) are a simple and stable way of extending your fiber optic cable or creating a service point at a patch panel.

These are also great for coupling your bulk fiber installation cable to a patch cable which will increase the longevity of the install cable.

ALTOS® Loose Tube, Gel-Free, All-Dielectric 144 fiber Cable

FastAccess(TM) Technology, Single-mode (OS2), max. attenuation 0.4 dB/km

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 144
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.62
• Cable O.D. (mm): 15.8
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 23.7
• Min. Bend Radius Installation (in.): 9.3
• Min. Bend Radius Long Term (cm): 15.8
• Min. Bend Radius Long Term (in.): 6.2
• No. of Fibers: 144
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

ALTOS® Lite™ Loose Tube, Gel-Free, SingleJacket, Single-Armored Cable

6 F, Single-mode (OS2)

Corning Cable Systems ALTOS® Lite™Gel-Free, SingleJacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations. The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water -swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 6
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.41
• Cable O.D. (mm): 10.5
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 15.8
• Min. Bend Radius Installation (in.): 6.2
• Min. Bend Radius Long Term (cm): 10.5
• Min. Bend Radius Long Term (in.): 4.1
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

FREEDM® One Tight-Buffered Cable - Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser, Plenum

Corning FREEDM One plenum cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: PLENUM
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.21
• Cable O.D. (mm): 5.3
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 8.0
• Min. Bend Radius Installation (in.): 3.0
• Min. Bend Radius Long Term (cm): 2.7
• Min. Bend Radius Long Term (in.): 1.0
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

FREEDM® One Tight-Buffered Cable -  Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct, General Purpose Horizontal, Vertical Riser

Corning FREEDM One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial and duct applications with no need for a transition splice when entering the building. The tight-buffered construction facilitates easier termination for low-fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 Um buffered fibers for easy identification, consistent stripping and direct termination. The s mall diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding o r bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: RISER
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Cable O.D. (in.): 0.22
• Cable O.D. (mm): 5.5
• Max. Tensile Load Installation N: 675
• Max. Tensile Load Long Term. N: 200
• Min. Bend Radius Installation (cm): 8.3
• Min. Bend Radius Installation (in.): 3.2
• Min. Bend Radius Long Term (cm): 5.5
• Min. Bend Radius Long Term (in.): 2.2
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 150
• Max. Tensile Load Long Term. (lb.): 45
• Unspsc Code: 26121607

MIC® Tight-Buffered Plenum Cable - Single-mode (OS2)

Applications: General Purpose Horizontal, Vertical Riser, Plenum

Corning MIC interlocking armored plenum cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use individually jacketed 900 um buffered fibers enabling easy, consistent stripping and facilitating termination. The fibers are grouped into jacketed subunits and surrounded by a dielectric central member.

The core is protected by a flexible, spirally wrapped, aluminum interlocking armor that offers easy, one-step installation and up to seven times the crush protection of unarmored cables. With a flame-retardant outer jacket, this cable is particularly useful for heavy traffic or more challenging mechanical exposure conditions and applications requiring extra rugged cables.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: TIGHT BUFFERED
• Fiber Count: 6
• Fire Rating: PLENUM
• Armored: YES
• Cable O.D. (in.): 0.48
• Cable O.D. (mm): 12.2
• Max. Tensile Load Installation N: 440
• Max. Tensile Load Long Term. N: 132
• Min. Bend Radius Installation (cm): 18.3
• Min. Bend Radius Installation (in.): 7.2
• Min. Bend Radius Long Term (cm): 12.2
• Min. Bend Radius Long Term (in.): 4.8
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 100
• Max. Tensile Load Long Term. (lb.): 30
• Unspsc Code: 26121607

Altos loose Tube, Gel-free - Single-mode (OS2)

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 72
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 48
• All-Dielectric: YES
• Armored: NO
• Unspsc Code: 26121637

Altos loose Tube, Gel-free, All-dielectric, Non-armored Cables

Corning ALTOS cable with Binderless FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for lashed aerial and duct installations. The innovative FastAccess technology feature combined with the gel-free binderless loose tube design simplifies removal of the cable jacket and accessing the buffer tubes. The loose tube design uses Corning's SMF-28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no cleanup is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. Corning's patented Binderless FastAccess Technology refers to the combination of a Corning FastAccess Technology jacket with an innovative technology used to bind cable construction through the manufacturing process, eliminating the use of binder yarns and waterblocking tapes.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 12
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

FREEDM One Tight-Buffered Cable 4 F Single-mode

4 F, Single-mode (OS2)

Corning FREEDM® One riser cables are flame-retardant, UV-resistant, indoor/outdoor cables designed for aerial, duct and direct-buried applications with no need for a transition splice when entering the building. The tight buffered construction facilitates easier termination for low -fiber-count applications in the local area network (LAN) and eliminates the need for fan-out kits. The design features TIA-598 color-coded 900 μm TBII® buffered fibers for easy identification, consistent stripping and direct termination. The small diameter and bend radius of the cable allow for easy installation in space-constrained areas while the innovative waterblocking technology is ideal for outside plant (OSP) applications. The all-dielectric cable construction requires no grounding or bonding, and the UV-resistant, flame-retardant jacket is rugged, durable and easy to strip.

Attributes

• Cable Type: TIGHT BUFFERED
• Fiber Count: 4
• Fire Rating: RISER
• All-Dielectric: NO
• Armored: NO
• Rodent Protected: NO
• Unspsc Code: 26121607

24-F ALTOS GEL-FREE CBL W/ FASTACCESS TECH CABLE

Corning Cable Systems ALTOS^® Lite™ Gel-Free, Single-Jacket, Single-Armored Cables are designed for campus backbones in direct-buried installations. The loose tube design provides stable and highly reliable transmission parameters for a variety of voice, data, video and imaging applications. These cables also provide high-fiber density within a given cable diameter while allowing flexibility to suit many system configurations.

The single armored construction provides additional crush and rodent protection with a high-strength ripcord under the armor for easy stripping. Gel-free means the cables are fully waterblocked using craft-friendly, water-swellable materials which make cable access simple and require no clean up. The flexible, craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. These cables have a medium density polyethylene jacket that is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 24
• All-Dielectric: NO
• Armored: YES
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

ALTOS Lite Loose Tube, Gel-Free, Single-Jacket, Single-Armored Cables w/ FastAccess Technology12 F, SMF-28 Ultra fiber, Single-mode (OS2)

Applications: Aerial, Direct Buried, Duct

Corning ALTOS Lite gel-free, single-jacket, single-armored cables with FastAccess technology are designed for direct-buried installations. The innovative FastAccess technology feature combined with the gel-free loose tube design simplifies removal of t he cable jacket and accessing the buffer tubes. The gel-free design means the cables are fully waterblocked using craft-friendly water-swellable materials which makes cable access simple and require no clean up. The loose tube design uses Corning's SMF- 28 Ultra fiber to provide reliable transmission parameters for a variety of voice, data, video and imaging applications. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation a nd environmental rigors while allowing easy midspan access. The single-armored construction provides additional crush and rodent protection. These cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.