Under $25

DIN-Rail Feed-Through Adapter, Category 6A, STP, 35-mm, Grounding

Accessories (ACCESSORIES AVAILABLE ARE SHOWN ON THE ENCLOSED SPEC).

Coupler Module, IDC-to-IDC Splice, CAT6A STP, Panel Mounting, IP68

Accessories (ACCESSORIES AVAILABLE ARE SHOWN ON THE ENCLOSED SPEC):
250-ICP68-0A-10 – Sealing Gasket for 250-ICP68-A/C/D Coupler Modules, Internal, Rubber, Pack of 10
250-ICP68-0B-10 – Sealing Gasket for 250-ICP68-A/C/D Coupler Modules, External, Rubber, Pack of 10
250-ICP68-0C0A – Surface Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 1-position
250-ICP68-0C0B – Surface Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 2-position
250-ICP68-0C0C – Surface Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 3-position
250-ICP68-0C1A – DIN-Rail Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 1-position
250-ICP68-0C1B – DIN-Rail Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 2-position
250-ICP68-0C1C – DIN-Rail Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 3-position

Cat6 8 Port Data Module

ICC’s Compact CAT6 data module is a cost-effective solution designed to provide broadband internet access for up to eight (8) computers in a residence. The module is integrated with a non-bridged CAT6 data board with eight (8) standard 4-pair 110 IDC connectors providing high-performance connectivity that’s tested up to 10dB Headroom at 250MHz. The Module exceeds TIA-568-B.2-1 industry standards. ICC’s Compact CAT6 data module is UL listed and has a PCB board design, without housing, offering the same performance. Use with CAT6e UTP solid cable.

SlimFIT™ Compact Customer Connection Point

The SlimFIT™ Compact Customer Connection Point is a compact, indoor wall mount fiber termination and distribution enclosure. This unit is typically used as an FTTH ONT access point or MDU point-of-entry. The unit is designed to be easily mounted to the wall with double-sided tape or screws. The low profile cover easily snaps over the base.

Includes everything you need to install on the wall

Cat6 U/FTP Flat Ethernet Network Cable, 30AWG

FireFold's Cat6 U/FTP Flat Ethernet Cables fit easily between cramped spaces, improving the look of your home or office due to their slim and easy-to-hide design. These flat cables fit perfectly under carpets, up walls, and even behind furniture and network equipment. The cables are a slim 0.11 inch (2.8mm) thick which allows plenty of ventilation room for network rack wiring. These flat shielded patch cables are designed to protect critical data from EMI (Electromagnetic Interference), which is known to degrade or even interrupt connectivity.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Cat6 28AWG, Pure Bare Copper,RJ45 Slim Ethernet Network Cable

FireFold's Slim Line Ethernet cable is the solution to reduce congestion in high-density Cat6 network environments, such as data centers, telecommunication and server rooms. With the Cat6 Slim Line series, you can fit more cables in the same space. Cable diameter is almost half a standard Cat6 cable, which allows cable bundles to be smaller and grants more air flow to prevent the servers from overheating.

Smart and cost-effective solution for long distance transmission

Superior solution for long distance transmission in data centers, telecommunications, Fiber to the Home, video transmission, Fiber Optic Sensing, etc. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥55dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

Smart and cost-effective solution for long distance transmission

Superior solution for long distance transmission in data centers, telecommunications, Fiber to the Home, video transmission, Fiber Optic Sensing, etc. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥55dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

Smart and cost-effective solution for long distance transmission

Superior solution for long distance transmission in data centers, telecommunications, Fiber to the Home, video transmission, Fiber Optic Sensing, etc. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥55dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

Smart and cost-effective solution for long distance transmission

Laser optimized fiber optic cable capable of supporting 40 Gigabit Ethernet (40GBASE) and 100 Gigabit Ethernet (100GBASE) networks up to 150 meters. Supports 10 Gigabit Ethernet (10GBASE-SR) networks up to 550 meters. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥25dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

Smart and cost-effective solution for long distance transmission

Laser optimized fiber optic cable capable of supporting 40 Gigabit Ethernet (40GBASE) and 100 Gigabit Ethernet (100GBASE) networks up to 150 meters. Supports 10 Gigabit Ethernet (10GBASE-SR) networks up to 550 meters. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥25dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

Smart and cost-effective solution for long distance transmission

Laser optimized fiber optic cable capable of supporting 40 Gigabit Ethernet (40GBASE) and 100 Gigabit Ethernet (100GBASE) networks up to 150 meters. Supports 10 Gigabit Ethernet (10GBASE-SR) networks up to 550 meters. Includes flammability rating OFNR (Riser) jacket with heat shrink to prevent the zipcord from separating from the connector.

Bend Insensitive Fiber

Constructed with the highest quality Corning Clearcurve Bend Insensitive Fiber (BIF) glass. This premium construction allows us to deliver the best macro-bending performance in the industry – up to 10x less signal loss in tight bend scenarios.

Designed for High-Density Environments

Fiber patch cable can be installed in loops less than an 7.5 mm radius producing less than 0.2 dB bending loss at 850nm to meet the demands for today’s hyper-scale data centers.

Tested to Meet Industry Standards

Each cable is tested to meet industry standards. Test results are included in a sticker in the bag for every cable for easy documentation.

Approvals: Telcordia GR-326-CORE, TIA/EIA-568-C.3, IEEE802.3z, RoHS Compliant. Manufacturing Facility: ISO-9001 and TUV Certified.

• Insertion Loss: ≤0.25dB
• Return Loss: ≥25dB

Barcodes for Asset Management Tracking

Document your new fiber patch cables in your infrastructure with a simple scan eliminating paper and manual processes. Labels are printed on both sides of the cable including the serial number, product number and barcode for asset management tracking.

Audit Proof Your Network

No data center is static or simple. With large volumes of equipment moving in and out for maintenance or reconfiguration our barcodes allow you to track, manage and monitor your cable throughout their life cycle with complete ease and efficiency.

Choose the Right RJ45 Connectors

Leverage the power of 40G with shielded termination plugs. Your data network is only as strong as your weakest link, so if you're using CAT8 Ethernet cable, make sure you have the correct plugs for the job.

The shielded CAT8 field termination plug is designed specifically for CAT8 bulk cable. This 8 pin 8 conductor (8p8c) plug has 50 micro inch gold plated contacts for superior signal conductivity. The wire alignment insert provides an efficient termination without a crimp tool, although a cable stripper is recommended to prepare the cable for termination. This connector has been rated for PoE and is capable of power transfer.

Why Shield Your RJ45 Connectors?

This connector housing is shielded with zinc die-cast nickel plating. This makes our CAT8 plugs more durable while being less prone to corrosion and rust. All our CAT8 plugs come standard with two different sizes of boots. These boots provide better stress relief support around the connection point of the cable and connector.

The copper foil included with the RJ45 connector will also further shield from any unwanted EMI or crosstalk. So, update your system today so your company can get faster, more efficient conversion rates.

Universal Stripping Tool | RG59, RG6, RG7, RG11, CATs, Flat Telephone Wire

Impact Punch Down Tool for Krone Terminal Block

Crimp Tool For RJ45, 8×8, Built-In Cutting-Stripping Blade, Black Grip Handle

Krone Type Replacement Blade for Impact Punch Down Tool (078-1025).

110/88/66 Replacement Blade for Impact Punch Down Tool

Impact Punch Down Tool with 110/88/66 Blade

When it comes to network and telecommunication wiring, having the right tools can significantly enhance efficiency, reliability, and overall performance. One such indispensable tool is the impact punch-down tool, specifically designed for terminating various types of cables such as Cat5e, Cat6, and more. The model 078-1025 is a high-quality punch-down tool that features interchangeable blades for enhanced versatility. In this guide, we will explore the essential features and advantages of using the 078-1025 impact punch-down tool.

The Importance of a Quality Punch-Down Tool

Wiring in data and telecommunications is sensitive work impacting the overall functionality of networks. A quality punch-down tool, like the 078-1025, ensures proper connections, making it essential for your toolbox. Here’s why a punch-down tool matters:

• Accuracy: Ensures that wires are securely terminated at connection points, reducing the risk of faults.
  
• Efficiency: Speeds up the installation process of network cables significantly.
  
• Reliability: Provides consistent performance across various applications.

Why Choose the 078-1025 Impact Punch-Down Tool?

Given the numerous features discussed, it’s essential to consider why purchasing the 078-1025 would benefit your networking projects:

• Versatile Application: With a range of compatible blades, this tool is suitable for both IT professionals and telecommunication technicians alike.
  
• Long-Lasting Performance: Constructed from durable materials, the 078-1025 is built to withstand regular use.
  
• Cost-Effective: The ability to replace blades rather than the entire tool minimizes long-term costs.
  
• Increased Productivity: Faster punch-down capabilities mean more work can be accomplished in less time.

1.25" Locking Gate Cable Holder

Benefits:

• Fast and easy cable management
• Ability to secure to wood and concrete
• Fits close to surface for clean installations

1" Locking Gate Cable Holder

Benefits:

• Fast and easy cable management
• Ability to secure to wood and concrete
• Fits close to surface for clean installations

3/4" Locking Gate Cable Holder

Benefits:

• Fast and easy cable management
• Ability to secure to wood and concrete
• Fits close to surface for clean installations

1/2" Locking Gate Cable Holder

Benefits:

• Fast and easy cable management
• Ability to secure to wood and concrete
• Fits close to surface for clean installations

1 1/4" Magnetic Locking Gate Cable Holder, Black

Benefits:

• Fast and easy cable management to metal surfaces
• Ability to position where needed
• No need to drill or weld to surfaces

Winnie's T Box

Benefits:

• Reduced time and effort to bend conduit
• Easier to access knockouts in all directions
• Aesthetically pleasing

1/2" Magnetic Locking Gate Cable Holder, Black

Benefits:

• Fast and easy cable management to metal surfaces
• Ability to position where needed
• No need to drill or weld to surfaces

Safety:

• Please handle neodymium magnets with care
  
• Keep neodymium magnets away from anyone with a pacemaker
  
• Magnets are not toys and should be kept away from children and pets
  
• Large powerful magnets can pinch your fingers or cause other injuries, use caution

3/4" J Hook w/ 100 LB Magnet on top

3/4" J Hook w/ Side Mount Magnet

• Magnet rated for 100 lbs.
• J hook has bendable tab
• Pregalvanized Steel

Tenda 300Mbps Mini WiFi Repeater

A301 is a N300 Mini Wi-Fi repeater dedicated to two-story houses, villas, and multi-room houses with an area of over 120 square meters. It offers up to 300Mbps data rate on the 11n band. With two external omnidirectional antennas, A301 can provide larger Wi-Fi coverage as well as high-speed data rates, satisfying applications playback of 1080P HD videos, massively multiplayer online games, and high-speed downloads. Easily switch over between Repeater and AP modes. With the upgrade Setup Wizard, it only takes you three steps to configure your repeater. A301 also works better with other brand Wi-Fi routers available on the market. For whole-home Wi-Fi coverage, A301 is your best choice.

Repeater Mode: Expand Wi-Fi coverage by bridging the upstream router's Wi-Fi signal.

AP Mode: Connect an Ethernet cable to the LAN port to turn it into an AP.

Manhattan USB 3.0 to Gigabit Network Adapter

10/100/1000 Mbps Gigabit Ethernet, SuperSpeed USB

The Manhattan USB 3.0 to Gigabit Network Adapter is a compact, high-performance network adapter that allows you to upgrade your desktop or notebook computer to operate at 10/100/1000 Mbps speeds on the LAN. Because it attaches to one of your computer’s USB connectors, there is no need to open up your PC — and the user-friendly setup software makes installation quick and easy.

Fast and Frugal

The Manhattan USB 3.0 to Gigabit Ethernet Network Adapter is equipped with a fully auto-sensing Gigabit LAN port capable of delivering a peak performance of 2 Gbps in full-duplex mode. It delivers exceptional performance for everyone who requires an ultra-fast and solid network connection. The latest in power-saving technology ensures the hub does not drain the battery of your computer in the process.

Auto-Negotiation

The USB 3.0 Gigabit Adapter will automatically detect the network speed that the LAN switch port is set to and run at the same speed. The adapter supports 10Base-T Ethernet, 100Base-TX and 1000Base-T Gigabit Ethernet.

Full Duplex

When running in full duplex mode, the USB 3.0 Gigabit Adapter connects at the following link speeds: 20 Mbps (10Base-T Ethernet), 200 Mbps (100Base-TX Fast Ethernet) and 2 Gbps (1000Base-T Gigabit Ethernet).

Portable Design

The Manhattan USB 3.0 to Gigabit Network Adapter is compact and can be easily used from one computer to another or transferred in your notebook case as you travel. It doesn’t take up a lot of space or add clutter to your work area.

Compatible with Just About Everything

From Windows®-based Ultrabooks (like the Dell™ XPS or Acer® Aspire series) to Chromebooks™, and Apple Macbooks® to laptops and desktop PCs, as long as your device features a standard USB 2.0 or USB 3.0 port (USB 3.0 recommended for best performance), you are good to go.

Manhattan USB 2.0 Fast Ethernet Adapter

10/100 Mbps Fast Ethernet, Hi-Speed USB 2.0

The Manhattan USB 2.0 Fast Ethernet Adapter is a compact, high-performance network adapter that allows you to upgrade your desktop or notebook computer to operate at 10/100 Mbps speeds on the LAN. Because it attaches to one of your computer’s USB connectors, there is no need to open up your PC — and the user-friendly setup software makes installation quick and easy.

Faster Throughput

The USB 2.0 Fast Ethernet Adapter allows you to connect to the network at 100 Mbps Fast Ethernet throughput speeds. Other adapters that only support USB 1.1 can not even come close to providing you with this enhanced performance.

Auto-Negotiation

The USB 2.0 Fast Ethernet Adapter will automatically detect the network speed that the LAN switch port is set to and run at the same speed. The adapter supports 10Base-T Ethernet and 100Base-TX Fast Ethernet.

Full Duplex

When running in full duplex mode, the USB 2.0 Fast Ethernet Adapter connects at the following link speeds: 20 Mbps (10Base-T Ethernet) and 200 Mbps (100Base-TX Fast Ethernet).

Portable Design

The USB 2.0 Fast Ethernet Adapter is compact and can be easily moved from one computer to another or transferred to your notebook case as you travel. It doesn’t take up a lot of space and doesn't add clutter to your workspace.