Test Equipment

ST-LT4500S – LANTEK IV-S 500MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT4500S bundle includes a LanTEK IV-S 500MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.

A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.

ST-LT4500S – LANTEK IV-S 500MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT4500S bundle includes a LanTEK IV-S 500MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-R240LSIV – FiberMASTER Quad Light Source

FiberMASTER Quad light source with LC connectors, Inspection port, VFL

ST-R240MIPV – FiberMASTER Multimode OTDR

FiberMASTER Multimode OTDR (850/1300) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PIP – FiberMASTER PON OTDR

FiberMASTER PON OTDR (1310/1550/1625) with SC-APC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMIV – FiberMASTER MM/SM Power Meter

FiberMASTER Multimode/single-mode power meter with interchangable SC/SC/FC connectors, Inspection port, VFL

ST-R240PMLS – FiberMASTER Power Meter and Light Source

FiberMASTER Multimode/single-mode power meter and quad light source kit, with Inspection port, VFL

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240QIP – FiberMASTER Quad OTDR

FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240SIPV – FiberMASTER Single-mode OTDR

FiberMASTER Single-mode OTDR (1310/1550) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240VIP – FiberMASTER Video Inspection Probe

FiberMASTER Video Inspection Probe

ST-R240VIP125U – FiberMASTER Video Inspection Probe Tip – 1.25mm

FiberMASTER Video Inspection Probe Tip – 1.25mm

ST-R240VIP125UA – FiberMASTER Video Inspection Probe Tip – 1.25mm APC

1.25mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe

ST-R240VIP250UA – FiberMASTER Video Inspection Probe Tip – 2.5mm APC

2.5mm/APC universal port/bulkhead tip for FiberMASTER Video Inspection Probe

ST-R240VIPLC – FiberMASTER Video Inspection Probe Tip – LC

FiberMASTER Video Inspection Probe Tip – LC

ST-R240VIP250U – FiberMASTER Video Inspection Probe Tip – 2.5mm

FiberMASTER Video Inspection Probe Tip – 2.5mm

ST-R240VIPLCA – FiberMASTER Video Inspection Probe Tip – LC/APC

LC/APC port/bulkhead tip for FiberMASTER Video Inspection Probe

ST-R240VIPSC – FiberMASTER Video Inspection Probe Tip – SC

FiberMASTER Video Inspection Probe Tip – SC

ST-R240VIPSCA – FiberMASTER Video Inspection Probe Tip – SC/APC

FiberMASTER Video Inspection Probe Tip – SC/APC

SimplyTEST™ – Replacement Battery Power for FiberMASTER S4

Ensure uninterrupted performance for your FiberMASTER S40 fusion splicer with the R301-BATT-S40 Li-ion battery. Designed for long-lasting power and flexibility, it keeps your splicing operations running smoothly.

ST-R301BATTS60 – FiberMASTER S60 Battery

SimplyTEST™ Replacement battery continuous splicing with FiberMASTER S60

Maximize your uptime and productivity with the ST-R301BATTS60 Li-ion battery for your FiberMASTER S60 fusion splicer. Engineered for extended use and ultimate flexibility, it ensures your work never stops.

ST-R301HOLDERKIT – 3 x 250um, 2 x 900um fiber holders

SimplyTEST™ – Fiber Holder Kit: Precision & Speed for Splicing – 5 x 250um, 2 x 900um fiber holders

Maximize your splicing efficiency and consistency with the Fiber Holder Kit. Designed for seamless integration with your cleavers and fusion splicers, these holders ensure perfect fiber placement every time.

ST-VFF5 – VISUAL FAULT FINDER

The Visual Fault Finder is a visible laser light source used to check continuity, locate breaks, poor mechanical splices and damaged connectors in fiber optic cabling.

Used to verify continuity, test and find breaks in fiber links, locate pinched fiber strands in termination cabinets, or anywhere fiber optic cables are terminated and subject to mechanical damage.

The VFF5 is also an excellent aide to technicians terminating mechanical splices or pre-polished connectors where leaking light is an indicator of a poor fiber cleave or other misalignment.

ST-158006 – PoE PRO Data Cable and PoE Verifier

The new PoE Pro eliminates guesswork when installing, maintaining, and troubleshooting networks where PoE is deployed. Previously technicians had to understand all the various standards, device power outputs, and cable lengths to be sure a device will operate successfully. The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality, or other factors.

The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.

Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously while TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.

Mini OTDR/Copper Tester (1310/1550nm)

The PT-OTDR-100 mini OTDR tester provides a simple to setup and easy to use solution for OTDR testing. Includes a 5.5 inch OLED touch screen for easy viewing of cable tests and can save and export your OTDR tests. This unit will perform OTDR tests, OPM, VFL and laser source functionality for fiber optic cable, and will also perform continuity testing and TDR for Category cable

MULTI-FUNCTIONAL TESTING

Multiple tests offered for both Fiber and Copper testing

COMPACT FORM FACTOR

Ruggedized form factor with a 4-6hr battery life, or charge on the go!

ACTIVE NETWORK TESTING

LLDP, PPPoE, IP Scan, & Ping testing all-in-one.

ACCESSIBLE PRICING

Priced to supply every truck and technician.

Platinum Tools Wireless Fiber Optic Inspection Scope

The PT-SCOPE-200 provides a solution for endface inspection and reporting to ensure fiber optic connectors are up to the correct cleanliness standards. With the 200X magnification, dirt and debris are easily identifiable and the integrated application will provide testing zones to show pass/fail results. Includes a slim carrying case for easy transport and most common connector endface adapters.

PERFECT FOR INSTALLERS
Ideal for technicians and installers working on fiber optic cable terminations.

VERSATILE AND RELIABLE
Perfect for fieldwork, datacenters, and telecom applications

Applications

• 5G fiber network installation and maintenance
  
• Data center inspections
  
• High-reliability fiber connection validation
  
• R&D and manufacturing environments