TAA Compliant

Audio Delay Device

The PA-ADS1 is an analog audio delay device with simple stereo RCA audio input and output to resolve “lip sync” issues in audio and video systems. Often analog audio would be processed faster than the digital video content which results in audio and video out of sync. The PA-ADS1 is a simple and perfect solution with 16 increments to delay audio anywhere from 20ms to 340ms with a turn of a dial.

PulseAudio In-Wall 30W Addressable Bluetooth Amplifier

The PulseAudio PA230BWA is an in-wall addressable Bluetooth audio receiver with a built in 2x30W amplifier in a single gang wall plate form factor, that creates a simple distributed audio system to stream music over Bluetooth. Equipped with a Class D, 60 watt in-wall power amplifier that supports 4 Ohm and 8 ohm speakers. Features two ways of connectivity including a stereo input (3.5mm jack), and Bluetooth 5.0 for a wireless connection. Automatically switches sources with the priority for Bluetooth connectivity. Install in one zone with the ability to install multiple units in one building, as each unit can be uniquely addressable. Connect the PA230BWA to a computer to address the ID and password to allow for multiple and unique amplifiers on the same site without issue! For an amplified 2-channel setup that is simple to operate with a clean look, the PA230BWA is a great solution to play and control music from your phone, tablet, or computer to an amplified single zone. 

PulseAudio In Wall Wifi Streaming Amplifier 2x30w

The PulseAudio PA230SWA is an in-wall streaming audio receiver with a built in 2x30W amplifier in a single gang wall plate form factor, that creates a simple distributed audio system to stream music over a wireless internet connection. Install in one zone or multiple zones, a great solution to stream music and create a wireless distributed audio system, all while using the easy to use and intuitive PASTREAM app! Play and control music, downloaded or streamed from your phone, tablet, or computer. The PA230SWA is compatible with Airplay, and Wi-Fi Direct that are found within the same network, allowing for songs to be shared easily in a distributed audio system. In addition, a mobile app is available on iOS and Google Play marketplaces, and allows the end user to sync their Spotify, Amazon Music, Qplay, TuneIn, iHeartRadio, and Tidal accounts for an effortless and enhanced listening experience. Multiple PA230SWA amplifiers can be used within the same systems allowing everyone to listen to their own music and playlists or join multiple units together for a party mode! 

Wall Plate Mixing Microphone and Analog Audio Extender

The PulseAudio PA-WPMIX Microphone Mixing Extender with dual-gang wall-plate transmitter extends and mixes balanced XLR and unbalanced analog audio signals up to 300m/984ft over a single Cat5e/6 cable. Mixing is done with an easy to use dial on the transmitting wall plate unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-WPMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-WPMIX includes two units: transmitting unit (PA-TXMIX-WP) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

PulseAudio Streaming Audio Receiver

The PulseAudio PASTREAM2 is an analog and digital audio streamer that allows amplifiers and distributed audio systems to stream music over a wired or wireless internet connection. A great solution to stream music to any audio device, or create a wireless distributed audio system, all with an easy-to-use and intuitive app! Play and control music, downloaded or streamed from your phone, tablet, or computer. The PASTREAM2 is compatible with Airplay, and WiFi Direct (Miracast) devices that are found within the same network, allowing for songs to be shared easily in a distributed audio system. In addition, the PulseAudio Streaming mobile app is available on the iOS and Google Play App Stores and allows the end user to sync their Spotify, Qplay, TuneIn, iHeartRadio, Amazon Music, and Tidal accounts for an effortless and enhanced listening experience. Multiple PASTREAM, PASTREAM2, and PA230SWA devices (sold separately) can be managed within the same system using the PulseAudio Streaming app, allowing everyone to listen to their own music and playlists, or be combined for party mode!

PulseAudio Digital/Analog Audio Transmitter

The PulseAudio PA-TXMIX analog audio mixing transmitter is an optional add-on unit for the PA-EXMIX analog audio mixing extender over Cat5e/6. Have more than 2 sources need to be mixed? No problem as an additional PA-TXMIX can be used and cascaded over a single Cat5e/6 for even larger solutions!

PulseAudio Microphone Mixing Extender

The PulseAudio PA-EXMIX Microphone Mixing Extender over single Cat5e/6 extends analog audio signals up to 300m/984ft . Mixing is done with an easy to use dial on the transmitting unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-EXMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-EXMIX includes two units: transmitting unit (PA-TXMIX) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

PulseAudio Stereo to Mono Audio Converter

The PA-SM21 Stereo to Mono Audio Converter can convert a stereo line level audio signal to a balanced mono audio output through the 3-pin terminal connecter. It can also adapt a balanced mono audio signal to an unbalanced mono audio signal using the dual RCA outputs. Small, compact and mountable metal chassis makes it a nice and easy solution when looking to convert your audio signal.