TAA Compliant

Quest Premier Raceway on a Roll 

Cover Your Tracks

The Premier Raceway FWF-14511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50ft long strip is 3/8" wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you've cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.

Quest Premier Raceway on a Roll - 50ft, White

Cover Your Tracks

The Premier Raceway FWF-05511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50’ long strip is 1/2” wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you’ve cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.

Quest Premiere Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-12411, the FCL-22411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-12411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1” wide, so it is only compatible with the 1” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Wire Hider | Cable Cord Concealer

In Hiding

What’s better than enjoying the low cost and high quality of FireFold’s extensive cable collection? Not having to see those cables running from your television! The easiest way to hide your wires from sight is the FWH-13414 from Quest. This premiere WireHider offers a professional look without the hassle of using wall plates. One inch wide, the four-foot strip of Raceway can accommodate several standard-size cables. There’s no need to be able to fit the bulky connectors through or wrestle to snap the cover back into place. A nearly invisible slit runs from end to end, allowing you to simply push your cables into place.

The FWH-13414 attaches to your wall by a strip of peel-and-stick adhesive. It is usually easier to run your cables through the WireHider after it is mounted to the wall or floor, but you can always add or remove cables easily even after it is set up. This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. Molded from smooth ABS plastic, this cable channel cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Wire Hider Cover

Put a Lid on it

When paired with the FWH-11411, the FCL-21411 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-11411 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1/2” wide, so it is only compatible with the 1/2” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Raceway Right Angles

On a Curve

Designed for use with cable cover systems, the FRA-31412 is a two-pack of right angle adapters that allows you to make a right angle turn against a flat surface. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the FRA-31412 also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and inside corners.

Quest Premiere Raceway Inside Corners

On a Curve

Designed for use with cable cover systems, this product is an inside corner adapter. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these corner adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the corner accessory also helps prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these inside corner adapters, there are also options available for outside corners and non-corner right angles.

Quest Raceway Wire Hider Cover Lid

Put a Lid on it

When paired with the FWH-13414 , the FCL-23414 WireHider Cover Lid from Quest helps create the cleanest look in cable management without opening up your wall. It is designed to go on top of the FWH-13414 WireHider cable channel to cover and conceal the flexible slit. It is an optional accessory, but it offers an ultimate layer of professionalism to any cable run. Adding this cover lid to your WireHider is a snap- literally. Once your cable channel is installed and your cables are inside, simply press the lid over the wire molding until it slides into place.

This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. This lid is 1.5” wide, so it is only compatible with the 1.5” version of Quest’s WireHider and corner pieces. Molded from smooth ABS plastic, this product cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Premiere Raceway Outside Corners

On a Curve

Designed for use with cable cover systems, these are outside corner adapters. These work especially well with Quest’s Raceway-on-a-Roll and WireHider products. With these corner adapters, you can create and customize your own unique wire runs to best hide your cords from sight. Cut and position your straight cable cover runs, securing them to the floor or wall as instructed by the manufacturer. Then snap these corner covers easily into place to conceal the wires around the bend.

In addition to providing unparalleled cable management, the corner adapters also help prolong cable life by protecting the cords within from the bumps and scrapes associated with everyday use. Molded from sturdy ABS plastics, these accessories are fire-retardant and UV-stabilized to prevent fading and staining. They are also latex-paintable for the ultimate in color-matching. In addition to these outside corner adapters, there are also options available for inside corners and non-corner right angles.

Quest Raceway Wire Hider | Cable Concealer 

In Hiding

What’s better than enjoying the low cost and high quality of FireFold’s extensive cable collection? Not having to see those cables running from your television! The easiest way to hide your wires from sight is the FWH-12411 from Quest. This premiere WireHider offers a professional look without the hassle of using wall plates. One inch wide, the four-foot strip of Raceway can accommodate several standard-size cables. There’s no need to be able to fit the bulky connectors through or wrestle to snap the cover back into place. A nearly invisible slit runs from end to end, allowing you to simply push your cables into place.

The FWH-12411 attaches to your wall by a strip of peel-and-stick adhesive. It is usually easier to run your cables through the WireHider after it is mounted to the wall or floor, but you can always add or remove cables easily even after it is set up. This strip is a single straight four-foot run, but it can easily be cut shorter using consumer-grade tools. With other Quest Raceway accessories, you can create curves, corners, and turns for a custom look in your home or business. Molded from smooth ABS plastic, this cable channel cannot be covered with latex paints, but the clean white color blends well with many styles of décor.

Quest Premiere Raceway Wire Hider

The WireHider® Surface Mount Raceway was designed with both the professional and the DIY installer in mind. WireHider® was designed to eliminate the problem of hard to install locations where the cable has a tendency to fall out, especially on ceiling runs. This raceway duct speeds up installation by enabling you to simply push the cables into its flexible center slit and it allows you to exit anywhere along the run without the concern of the cable falling out.