TAA Compliant

Evolution 4K HDMI Extender over Single Coax Cable with Bi-directional IR

The Evolution by Vanco EV4K2004 HDMI Extender can send and receive 4K resolutions over single RG6 coaxial cable with Bidirectional IR. Capable of extending 4K@60Hz up to a distance of up to 330ft/100m and 4K@60Hz with HDR10 High Dynamic Range up to 230ft/70m. The EV4K2004 also features bi-directional IR, which allows for control of the source or display. Also features dynamic EDID management, which allows and encourages source and display “handshake” for seamless integration. Compact design with mounting ears included, for an easy and flexible installation. Can’t run a Cat6 cable to a location? No problem, the EV4K2006 is a great solution for applications which already have an existing RG6 coaxial cable in place.

The EV4K2004 includes two units: transmitting unit (EV4K2004-TX) and receiving unit (EV4K2004-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one RG6 coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and control signals. The EV4K2004 offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and provides a solution in applications where additional cables cannot be installed.

*Installation Note: RG6 coaxial cable must be used, RG59 and mini coax will not work with this product; coaxial connections must be BNC and home-run cable strongly recommended.

Evolution HDMI over IP Transmitter/Receiver

The Evolution by Vanco EVOIPLITE HDMI over IP Transmitter/Receiver is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send multiple sources to multiple displays along with IR and RS232 pass-through, analog and digital audio breakout in TX mode, video up to 1080P@60Hz, with POE up to 100m when connected to a POE enabled switch off of a single Cat6 cable. This one single unit can be set to transmit or receive signals. When connected to a network with internet, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including remote diagnostics and troubleshooting, as well as voice control capabilities with Alexa! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and cost effective solution for both residential and commercial installations.

Wall Plate Mixing Microphone and Analog Audio Extender

The PulseAudio PA-WPMIX Microphone Mixing Extender with dual-gang wall-plate transmitter extends and mixes balanced XLR and unbalanced analog audio signals up to 300m/984ft over a single Cat5e/6 cable. Mixing is done with an easy to use dial on the transmitting wall plate unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-WPMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-WPMIX includes two units: transmitting unit (PA-TXMIX-WP) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

PulseAudio Streaming Audio Receiver

The PulseAudio PASTREAM2 is an analog and digital audio streamer that allows amplifiers and distributed audio systems to stream music over a wired or wireless internet connection. A great solution to stream music to any audio device, or create a wireless distributed audio system, all with an easy-to-use and intuitive app! Play and control music, downloaded or streamed from your phone, tablet, or computer. The PASTREAM2 is compatible with Airplay, and WiFi Direct (Miracast) devices that are found within the same network, allowing for songs to be shared easily in a distributed audio system. In addition, the PulseAudio Streaming mobile app is available on the iOS and Google Play App Stores and allows the end user to sync their Spotify, Qplay, TuneIn, iHeartRadio, Amazon Music, and Tidal accounts for an effortless and enhanced listening experience. Multiple PASTREAM, PASTREAM2, and PA230SWA devices (sold separately) can be managed within the same system using the PulseAudio Streaming app, allowing everyone to listen to their own music and playlists, or be combined for party mode!

PulseAudio Digital/Analog Audio Transmitter

The PulseAudio PA-TXMIX analog audio mixing transmitter is an optional add-on unit for the PA-EXMIX analog audio mixing extender over Cat5e/6. Have more than 2 sources need to be mixed? No problem as an additional PA-TXMIX can be used and cascaded over a single Cat5e/6 for even larger solutions!

PulseAudio Microphone Mixing Extender

The PulseAudio PA-EXMIX Microphone Mixing Extender over single Cat5e/6 extends analog audio signals up to 300m/984ft . Mixing is done with an easy to use dial on the transmitting unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-EXMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-EXMIX includes two units: transmitting unit (PA-TXMIX) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.