HDMI Extender over Cat6 Cable with IR Contractor Multi Pack- 196ft
Easily and conveniently extend your HD signal up to 196ft using this HDMI extender over Cat6 network cable. This extender uses a single Category 6 cable to transmit your digital signal, allowing you to surpass the standard 50ft limitations of ordinary HDMI cables. It supports resolutions up to 1080p and is 3D ready for capable devices. The sleek aluminum alloy shell is both durable and attractive.
From $259.99 - $459.99
PureLink DVI 4x1 Switcher
The PureLink DS-41R DVI 4x1 Switcher eliminates the need for plugging and unplugging cables to switch between your DVI source devices. This unit switches between four separate DVI sources when connected to a single DVI display. It offers the option of manual switching via a button on the device or wireless switching using the included IR remote control.
Vanco HDWIRKIT HDMI Wireless ExtenderVanco HDWIRKIT HDMI Wireless Extender
- Extends HDMI signals wirelessly up to 131ft/40m
- Transmits up to 1080p HD video and audio
- Kit includes both Transmitter and Receiver for point to point application
- Able to split wireless HDMI signals to up to 4 displays (additional HDWIR-RX receivers sold separately)
- Multiple kits able to be installed in one application without interference
- Perfect solution where cabling cannot be run such as a mantle or outdoor application
- IR pass-through to control source from display location wirelessly
- Wireless 5 GHz frequency
- No line of sight installation required, wireless signal will pass through most obstacles
- Easy manual front panel or IR setup for multiple units
- Dimensions: 5.25” W x 0.75” H x 3” D
Techlogix Networx TL-SM3X1-HDV Share-Me 3x1 HDMI & VGA switcher
We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…
The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…
Techlogix Networx TL-SM3X1-HD Share-Me 3x1 HDMI switcher
TL-SMG-HD table insert is the perfect complement to TechLogix TL-SM3X1 switchers. Not only does it provide local HDMI connection, but also provide intuitive control for input switching and display on/off.
Essentially, the TL-SMG-HD and TL-SM3X1 system is a high-quality, inexpensive control and signal management system that anyone can understand.
The unit includes an under-table mounting bracket that locks the insert securely to any flat surface.
Techlogix Networx TL-TP70-HDIR HDMI & IR over Twisted Pair Cable Extender -- 70m
HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.
The TL-TP70-HDIR replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR control signal embedding allow you to also transmit bi-directional IR commands with the HDMI stream.
In actual practice, this means you can use the TL-TP70-HDIR to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!
Vanco HDBT4K50 EXTENDER HDMI HDBASET HDCP2.2 4K/60Hz HDR 50M OVER 1-UTP w/POC w/IR
EXTENDER HDMI HDBASET HDCP2.2 4K/60Hz HDR 50M OVER 1-UTP w/POC w/IR
<!-- features -->
- Features the latest HDBaseT Technology, optimized for whole-home or commercial distribution of high definition signals at much greater distances of standard HDMI cables
- Transmission Range: Extends 4K@60Hz, 4:4:4 with HDR up to 164ft/50m over a single Cat5e/6 cable and 1080p@60Hz up to 230ft/70m
- Features Power over Cable technology (PoC) which transmits power over Cat5e/6, allowing for either Transmitter or Receiver to be powered without the use of a power supply
- Virtually Lossless Compression retains high end audio and video quality
- Bi-directional IR control
- Features Auto EDID and EQ Management for plug and play installation
- HDR Compatible
- HDCP 2.2 compliant and backward compatible to previous versions
- CEC Support
- Slim and compact design
- Power Supply: DC 12V, 2A
- Dimensions: 5.75” W x .7” H x 3.7” D
<!-- package -->
HDBT4K50 (TX & RX)
IR Transmitter (IR TX)
IR Receiver (IR RX)
(1) DC 12V Power Supply
PureLink AV HDMI and USB/KVM over IP Distribution System
Need a way to incorporate audio/video, RS-232, IR, USB, and matrix switching capabilities to your IP network? Look no more! The VIP-200H from PureLink AV allows you to add all of these features with point-to-point extension up to 590 feet, or 180 meters. You can also take advantage of point-to-many and many-to-point via the feature rich VIP IP Video Management Software.
Transmitter Kit Receiver Kit Transmitter and Receiver (1) VIP200H/DV-TX (1) VIP200H/DV-RX (1) VIP200H/DV-TX and (1) VIP200H/DV-RX (1) Power Adapter (1) Power Adapter (2) Power Adapters (1) Infrared Receiver (1) Infrared Emitter (1) Infrared Receiver and (1) Infrared Emitter (1) Remote Control (1) Remote Control General Technical Specifications Supported Resolution Up to 1080p@60Hz (Full HD) Supported Distance Using Cat5E: 492ft (150m); Using Cat6: 590ft (180m) Transmitter Connector Types 1x USB Type B, 1x RS232 (DB9 Female), 1x HDMI Type A (Input), 1x HDMI Type A (Loop Output), 1x RJ45 Receiver Connector Types 4x USB Type A, 1x RS232 (DB9 Male), 1x HDMI Type A, 1x RJ45 Audio Connector 1x 3.5mm Phone Jack (10KΩ / 1Vpp) IR Receiver (Internal) 30-60Khz / ±45° / 5M IR Emitter (External) 3.5mm Stereo Phone Jack Power Supply DC 5V 2A Power Consumption 750mA (Typical) / 1000mA (Max) Operation Temperature 0 to 55℃ Storage Temperature -20 TO 85℃ Humidity Up to 95% Dimensions 4.92 x 5.51 x 1.18" (125 x 140 x 30mm) Weight 0.86lbs (390g) Distribution Point-to-point: 590ft KVM Extender
Distribution: (1) TX to 154+ RX
Switching: Up to 100 TX to (1) RX
Matrix: Up to 100 TX to 154+ RX
From $499.99 - $999.99
IP Module for KVM-19E08 and KVM-19E16
IP Module for Norco rackmount monitors KVM-19E08 and KVM-19E16 allows you to manage servers around the world via IP.
Compatible with any operating system, BIOS mode, boot and blue screens. No additional software required. Can be controlled over java-enabled browsers.
Ethereal HDM-GA1 HDMI Gigabit Accelerator for Passive HDMI
This compact, yet innovative solution from Ethereal Home Theater lets you upgrade older passive 24AWG HDMI cables to 18 Gbps bandwidth capabilities. It's a simple plug and play adapter, powered by a single Micro USB cable that can be plugged into an available USB port on the display. It is designed to be mounted at the display side. It features a transmission distance of up to 15 meters. The DDC data integrity circuitry solves EDID low speed data issues. It exceeds HDMI 2.0a standards, supporting 4K/60, 4:4:4 and HDR video.
PureLink 4K HDMI over HDBaseT Extension System
The PureLink AV HCE II Tx/Rx 4K HDMI over HDBaseT Extension System is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.
The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.
PureLink HDMI, RS-232, IR, ARC & Ethernet Receiver over HDBaseT with 3D, 4K Support
The PureLink HTR Rx HDMI, RS-232, IR, ARC & Ethernet Receiver over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.
PureLink HDMI, RS-232, IR, ARC & Ethernet Transmitter over HDBaseT with 3D, 4K
The PureLink HTR Tx HDMI, RS-232, IR, ARC & Ethernet Transmitter over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.