Wireless HDMI Extender Kit, 165Ft (50m) 1080p
This wireless extender includes both transmitter and receiver unit, that allows it transmit and extend HDMI signal up to 50 meters long away wireless,
it has strong anti-interference ability by running at 5GHz operation frequency and supports point to point connection, the IR function allows to remote control the source device from the receiver side which makes it a great solution for meeting, conference rooms,commercial, home entertainment and multi-media education etc..
NOTE: This product is intended to be used in an open area (same room). Signal strength is not guaranteed through walls.
Vanco HDMIEX50 HDMI Extender over Single Cat5e/Cat6 Cable
Extending an HDMI signal over long distances doesn't get much easier than this. The HDMIEX50 from Vanco allows you to transmit an HD audio/video signal up to 164 feet away using a single Cat5e or Cat6 Ethernet cable. It supports IR pass-through using the included IR cables, while HDMI Loop-out allows the transmitter to be split and cascaded onto multiple displays. Convenient EQ settings allow adjustment based on cable distance, and EDID settings enable management through the HDMI Loop-out or output. This unit supports full HD video up to 1080p@60Hz and is HDCP compliant.
TP-Link TL-SG1024 24-Port Gigabit Rackmount Switch
The TL-SG1024 is specially designed for Ethernet (10Mbps), Fast Ethernet (100Mbps) and Gigabit Ethernet (1000Mbps) with seamless link. Each port supports up to 2000Mbps throughput in full duplex mode. It is the perfect choice to improve the performance of Offices and workgroup networks.
PureLink UHD-120 1x2 Ultra HD/4K HDMI Distribution Amplifier
The PureLink UHD-120 1x2 Ultra HD/4K HDMI Distribution Amplifier splits an HDMI signal to send it simultaneously to two separate displays. It supports resolutions up to 1080p and 4Kx2K Ultra HD and is HDCP compliant. Built-in equalization and reclocking ensure optimal signal quality.
TP-Link TL-SG1016 16-Port Gigabit Rackmount 10/100/1000 Ethernet Switch
The TL-SG1016 is specially designed for Ethernet (10Mbps), Fast Ethernet (100Mbps) and Gigabit Ethernet (1000Mbps) with seamless link. Each port supports up to 2000Mbps throughput in full duplex mode. It is the perfect choice to improve the performance of Offices and Workgroups networks.
Ethereal HDMI Surge Protector
This HDMI Surge Protector is designed to protect against voltage spikes that might damage your connected HDMI components. It can withstand up to 8KV of voltage surge and offers protection on both input and output (protects both source and sink). It supports full 1080p 3D resolutions.
NETGEAR ProSafe 24-Port 10/100 Fast Ethernet Switch
Netgear has been a trusted company for networking products for a very long time. The reason for this is that you get a great product for a great price that lasts for a long time. When you want solid network performance for your growing business plus the added benefit of quiet operation, NETGEAR’s ProSafe series are your best choices for quality, convenience, and smooth — running usability — all at very affordable prices.
With the model you are looking at now, the JFS524, you are getting a twenty-four port rackmount switch that can handle 10/100 Mbps networks. It’s very simple in form and compact - saving space and allowing for installation. Installation is as simple as plugging in your ethernet cables and power - that’s it. It pretty much could almost set itself up, though, that might make things a little boring! Or entertaining, depending on what makes you happy.
Twenty-four switched ports provide private bandwidth for PCs, servers, or hubs, and support 200 Mbps of throughput. Each port delivers 200 Mbps of network speed in full-duplex mode. As soon as it’s powered on, it begins operating. Ever-vigilant, the JFS524 begins to operate as soon as it’s powered on – with no configuration required. All 24 ports deliver automatic speed and full/half duplex sensing, plus Auto Uplink™, which adjusts for straight-through or crossover cables to make the right link. Plus, with many status LEDs available, you’ll be able to tell when everything is working as it should or not for quick glance diagnostics before having to run heavier tests on your equipment.
This device comes with a limited lifetime manufacturer warranty, so you can rest assured when you make your purchase. So, stop hesitating! Get your hands on this switch and move along. Make sure to check out our network cables as well to ensure you get everything for your task at hand!
IOGEAR Duplicast Wireless Screen Mirroring
Leave it to IOGEAR to provide one more way to cut the cord. The GWAVRKIT Duplicast Wireless Screen Mirroring allows you to stream your PC content directly to your HDTV, projector, or HD display. This means you can enjoy all your movies, videos, pictures, and Web content in full 1080p HD on the big screen without having to connect any wires.
The system transmits up to fifty feet away, so you've got generous room to scale. It's also expandable, supporting multiple transmitters so you're not limited by the number of laptops and computers you connect to it. This makes it ideal for classrooms and boardroom settings. In addition, the encrypted and dedicated wireless connection eliminates WiFi congestion, so no one gets the boot.
Vanco 280725 HDMI Wall Plate Extender over 2 UTP Cables - IR Control
This HDMI Wall Plate Extender set from Vanco allows you to transmit a full 1080p HD signal up to 180 feet away using two Category 6 cables, or 164 feet using two Category 5E cables. The 280725 supports 3D and has a built-in Super IR control system with a forward or backward transport channel. These white plates fit any standard single gang box, so you can complete your install with a professional, finished look that matches any decor.
Techlogix Networx TL-DA14-HD2 1x4 HDMI Splitter -- 4K@60
The need to 'split' an HDMI signal is quite common. In residential applications, splitters are often used for sending a single cable box to multiple displays. In office applications, splitters are often used for sending a single computer to multiple monitors. In education applications, splitters are often used to send a video source to both a desktop monitor and a ceiling mounted projector. There are lots of use patterns, and they all revolve around the need to take a single HDMI source and send it to multiple destinations.
The TL-DA14-HD2 splits a single source to four destinations (typically displays or projectors). A built-in amplification circuit ensures performance for higher resolutions (1080p, 4K@30, and 4K@60) and longer cable lengths.
IOGEAR Wireless 1080p Computer to HD Display Kit
With the IOGEAR GUWAVKIT4B Wireless 1080p Computer to HD Display Kit, you can enjoy your computer's content on your big screen HDTV without the hassle of unattractive wires. Simply use your computer's USB port to wirelessly transmit your videos, pictures, social media, presentations, and more right to your high definition set. Now you can surf the Web from the comfort of your couch, show off photos to your family on the big screen, stream music directly to your home theater system, and show presentations.
Zigen HDBaseT Receiver over Single Cat5e/6/7 up to 70m for HX-88 and HX-1616 HDBaseT Modular Matrixes
Using HDBaseT technology, the ZIG-HVX-70R from ZIGEN extends an HDMI signal up to 70 meters using a single Ethernet cable. It also transmits bidirectional control signals for ultimate convenience. It can be used as a stand alone solution or combined with matrix switch setups to extend the input or output cable distance.
This HDMI extender supports resolutions up to 1080p and 4Kx2K Ultra HD. It supports simultaneous transmission of RS-232 and IR signals from a control system, enabling remote control of source devices or displays.
StarTech DisplayPort to DisplayPort Multi Monitor Splitter - 3-Port MST HubThis MST hub lets you connect three monitors to your DisplayPort™ (DP) 1.2 equipped Windows® laptop or desktop.
Increase productivity with multiple screens
The newest generations of computers are more portable than ever, which often means that you're left with fewer video outputs and smaller integrated screens. This MST hub solves both of these problems by letting you connect three additional displays to your computer, which makes multitasking much easier. Connect to any display
With the MST hub, you can use DisplayPort video adapters and cable adapters that enable you to connect HDMI, VGA or DVI displays. This ensures your MST hub will be compatible with virtually any television, monitor or projector. This MST hub is VESA and DisplayPort certified to support DP 1.2 enabled systems, for seamless integration with your existing video equipment. Configure your displays for any environment
Using the MST hub, you can extend your desktop onto additional monitors and stream independent content to each display giving you the freedom to multitask and increase your productivity. You can also mirror the same image onto multiple displays for remote viewing applications such as digital signage. Enjoy amazing video quality, without draining system resources
MST technology uses your existing video card to minimize the use of system resources while delivering Ultra HD 4K resolutions. This unprecedented performance makes MST perfect for high-resolution applications such as graphic design, gaming and medical imaging.
Note: When using a DisplayPort 1.1 video card the MSTDP123DP will act as splitter, automatically mirroring your video source across all displays. Resolution limitations apply.
The MSTDP123DP supports plug-and-play installation for a hassle-free setup, and is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Note: MST shares 21.6 Gbps across all attached displays. Higher resolutions can restrict the available bandwidth with the remaining ports, please see our guideline below for determining an ideal resolution for your setup. Certain graphics adapters have limited MST support and will only output to three displays in total. If more than three monitors are attached the fourth will be disabled.
Techlogix Networx TL-2X1-HDV 2x1 HDMI & VGA Switcher
We’ve all experienced it…you walk into a meeting room and there are cables all over the place…a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…
The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants.
Enter the TL-2X1-HDV. This compact switcher automatically manages the connections of two unique users or two unique connections—no more passing cables, pushing buttons, and untangling knots. The switcher automatically “senses” when someone plugs in an HDMI or VGA cable and makes their device live to the display. It’s the latest and greatest in automatic switching technology.USER MANUAL
Techlogix Networx TL-TP50-HDIR HDMI & IR over Shielded Twisted Pair Cable Extender -- 50m
HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.
The TL-TP70-HDIR replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR control signal embedding allow you to also transmit bi-directional IR commands with the HDMI stream.
In actual practice, this means you can use the TL-TP70-HDIR to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!
HDBaseT 230ft Single Cable HDMI Extender Wall Plate
Extend your HDMI signal up to 230 feet over a single Cat5E or Cat6 cable with this HDBaseT extender wall plate set. This advanced home theater signal booster supports resolutions up to 1080p and 4Kx2K, as well as 3D video. It also features IR bi-directional pass through for extended remote control reach.
- (1) Transmitter Wall Plate
- (1) Receiver Wall Plate
- (2) Power Supplies
- (1) User Manual
- (1) IR Emitter
- (1) IR Sensor