Your Cart

Free Shipping on Orders > $74.99 - *Some Exclusions May Apply

expand/collapse
(704) 979-7100 (0)
  • HIDEit DSkate | Vertical Display Skateboard Mount
  • HIDEit DSkate | Vertical Display Skateboard Mount
  • HIDEit DSkate | Vertical Display Skateboard Mount
  • HIDEit DSkate | Vertical Display Skateboard Mount
  • HIDEit DSkate | Vertical Display Skateboard Mount
  • HIDEit DSkate | Vertical Display Skateboard Mount
  • HIDEit DSkate | Vertical Display Skateboard Mount

HIDEit DSkate | Vertical Display Skateboard Mount

SKU#: DSKATE-BLK

UPC#: 858691006975

60 Day Money Back Guarantee

100% Secure Shopping

SKU#: DSKATE-BLK

UPC#:858691006975
$35.00

SKU#: DSKATE-BLK

UPC#:858691006975

Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.

Califonia Warning 65

California Prop 65 Warning

×
For CA Residents Only.
California Proposition 65 Warning

Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.

• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.

For further information, please visit www.P65Warnings.ca.gov

  • Description+
  • HIDEit DSkate Vertical Display Skateboard Mount

    Have a kick a** board? MOUNTit! The HIDEit Display Skate Mount is the best way to vertically store your board while showing off your custom skateboard deck! This easy-to-install skateboard wall mount works with all complete skateboards including OG, Longboards, Penny Boards and more! Our unique U-shape steel bar cradles the trucks to securely hold your board in place, while the rubber dip coating prevents the bar from scratching your board. The Display Mount’s minimal design won’t take up a lot of space allowing you to mount it just about anywhere for easy grab ’n go access. So get your favorite boards off the ground and…cruise, DISPLAYit, repeat!

  • Features+
    • Universal design fits all complete skateboard types.
    • Rubber dipped steel bar won’t scratch board.
    • Fixed cap + steel backplate secures bar.
    • Provided rubber strip prevents board’s grip tape from scratching the backplate.
    • Made in the USA from 5/16” steel for strength + durability.
    • Quick and easy to install. Minimal tools needed.
    • Includes drywall screws and anchors rated for 25 pounds each. Stud mounting is optional.
  • Specs+
  • Product Name: HIDEit DSkate
    UPC: 858691006975; 3-Pack 850045107017; 5-Pack 850045107024
    Includes: (2) #8 Flat Head Drywall Screws, (2) Self-Drilling Heavy-Duty Drywall Anchors
    Dimensions: H 5.22 x L 8.14 x D 0.52 in (132.6 x 206.8 x 13.2mm)
    Released: 8/2020 | Copyrighted + Patent Pending

  • Reviews+
  • Q&A+
  • When mounting, do the backplate screws holes go above or below the bar?

    The backplate has to be mounted with the screws underneath the bar.

    Does the mount work with boards that have more curvature?

    Absolutely! Just position the bar closer to the bottom bushing of the trucks instead of the base of the trucks.

    What is the rubber strip for?

    The provided rubber strip is optional, but is used to prevent rubbing between the mount backplate and the board's grip tape.

    HIDEit DSkate Vertical Display Skateboard Mount

    Have a kick a** board? MOUNTit! The HIDEit Display Skate Mount is the best way to vertically store your board while showing off your custom skateboard deck! This easy-to-install skateboard wall mount works with all complete skateboards including OG, Longboards, Penny Boards and more! Our unique U-shape steel bar cradles the trucks to securely hold your board in place, while the rubber dip coating prevents the bar from scratching your board. The Display Mount’s minimal design won’t take up a lot of space allowing you to mount it just about anywhere for easy grab ’n go access. So get your favorite boards off the ground and…cruise, DISPLAYit, repeat!

    • Universal design fits all complete skateboard types.
    • Rubber dipped steel bar won’t scratch board.
    • Fixed cap + steel backplate secures bar.
    • Provided rubber strip prevents board’s grip tape from scratching the backplate.
    • Made in the USA from 5/16” steel for strength + durability.
    • Quick and easy to install. Minimal tools needed.
    • Includes drywall screws and anchors rated for 25 pounds each. Stud mounting is optional.

    Product Name: HIDEit DSkate
    UPC: 858691006975; 3-Pack 850045107017; 5-Pack 850045107024
    Includes: (2) #8 Flat Head Drywall Screws, (2) Self-Drilling Heavy-Duty Drywall Anchors
    Dimensions: H 5.22 x L 8.14 x D 0.52 in (132.6 x 206.8 x 13.2mm)
    Released: 8/2020 | Copyrighted + Patent Pending

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    L
    Linda B.
    Looks cool on his wall!

    My grandson loves it!

    When mounting, do the backplate screws holes go above or below the bar?

    The backplate has to be mounted with the screws underneath the bar.

    Does the mount work with boards that have more curvature?

    Absolutely! Just position the bar closer to the bottom bushing of the trucks instead of the base of the trucks.

    What is the rubber strip for?

    The provided rubber strip is optional, but is used to prevent rubbing between the mount backplate and the board's grip tape.

Open Google Reviews for our website ×