Speaker Wall Plates

Vanco 28146W Binding Post Decor Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-1P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to a bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with a single speaker. Installing and connecting the WP-1P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco WP-2P-BIND Binding Post Wall Plate

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-2P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along the seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with two speakers. Installing and connecting the WP-2P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor faceplate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco 1 Gang Wall Plate 

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s HTWP62BW 6.2 Home Theater Connection Wall Plate is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is compatible with three-gang junction boxes and low voltage brackets and it includes a convenient bulk pass-through spout for your other home theater cables. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With six pairs of red and black binding post connections and two RCA subwoofer jacks, this wall plate is thorough and flexible.

Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note the subwoofer connections on the back side of this plate are screw-on F-style coax, not RCA. All jacks are gold-plated for the seamless signal passage and optimal sound.

Vanco WP-4P-BIND Binding Post Wall Plate 

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-4P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with four speakers. Installing and connecting the WP-4P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

• (1) Vanco 28148W 4 Pair Binding Post Decor Wall Plate
• (2) Color Matching Screws