Free Shipping on Orders > $99.99 - *Some Exclusions May Apply

Singlemode

Sort by

Select Options

No reviews

Cleerline™ LC/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

LC/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ LC/UPC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ LC/UPC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

From $32.12 - $365.52
10% off
at checkout

No reviews

Techlogix Networx TL-10GSFPP-SM10K 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver - Single Mode Fiber

Techlogix Networx 10GBASE-LR SFP+ 1310nm DOM Transceiver

TechLogix SFP and SFP+ transceiver modules adapt TechLogix fiber technology to different cable formats. The TL-10GSFPP-SM10K transmits 10G signals up to 10km (6.2 miles) over duplex single-mode fiber.

$114.93
Free Shipping

Select Options

No reviews

Vertical Cable 24 Port Optical Fiber Keystone Module Panel (266-PKM04 Series)

24 Port Optical Fiber Keystone Module Panel (266-PKM04 Series)

Optical Fiber Rack-Mount Panel, Front-Retractable Keystone-Module Blocks, Label Holder, 1-RMU, 24-Position.

From $53.52 - $106.75
10% off
at checkout

No reviews

Techlogix Networx S2M4D-ADPT-LCSC Fiber optic coupler -- duplex LC to SC coupler -- compatible with single mode & multimode cable

Techlogix Networx Fiber Optic Coupler

'Get out the cable stretcher!' This is a mildly humorous prank to play on a greenhorn cable installer, but sometimes, don't you wish you actually had one?

Fiber couplers (sometimes called adapters) are a simple and stable way of extending your fiber optic cable, or creating a service point at a patch panel.

These are also great for coupling your bulk fiber installation cable to a patch cable which will increase the longevity of the install cable.

$169.99
Select Options

No reviews

SimplyFIBER SC/APC SM Mechanical Connector, Green

Simply – SC/APC Premium single-mode mechanical reusable connector with high clarity matching gel for 250/900µm fiber, green

From $18.50 - $162.95
Select Options

No reviews

SimplyFIBER SC/UPC SM Mechanical Connector, Blue

Simply – SC/UPC Premium single-mode mechanical reusable connector with high clarity matching gel for 250/900µm fiber, blue

From $18.50 - $162.95
Select Options

No reviews

SimplyFIBER LC/UPC LC/UPC SM Mechanical Connector, Blue

Simply – LC/UPC Premium single-mode mechanical reusable connector with high clarity matching gel for 250/900µm fiber, blue – 1ea/Bag

From $18.50 - $162.95
Select Options

No reviews

SimplyFIBER LC/APC SM Mechanical Connector, Green

Simply – LC/APC Premium single-mode mechanical reusable connector with high clarity matching gel for 250/900µm fiber

From $18.50 - $162.95
Free Shipping

No reviews

Cleerline 10G SFP+ Transceiver SM BiDi T:1330/R:1270nm, 20Km Max Reach

10G SFP+ Transceiver SM BiDi T:1330/R:1270nm, 20Km Max Reach

Cleerline™ Bi-directional (BiDi) 10G SFP+ transceivers are high-performance, cost-effective modules supporting 20 km transmission distance with single-mode fiber.

This SFP module accepts 1 LC connector and must be installed as a pair: SSF-SFP-SM10GBDA matched with SSF-SFPSM10GBDB.

These single-mode transceivers are small form factor pluggable modules for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. The SFP+ 20-pin connector allows hot plug capability.

Modules are designed for single-mode fiber and operate at a nominal wavelength of 1270nm or 1330nm. The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

$107.80
Free Shipping

No reviews

Cleerline 10G SFP+ Transceiver SM BiDi T:1270/R:1330nm, 20Km Max Reach

10G SFP+ Transceiver SM BiDi T:1270/R:1330nm, 20Km Max Reach

Cleerline™ Bi-directional (BiDi) 10G SFP+ transceivers are high-performance, cost-effective modules supporting 20 km transmission distance with single-mode fiber.

This SFP module accepts 1 LC connector and must be installed as a pair: SSF-SFP-SM10GBDA matched with SSF-SFPSM10GBDB.

These single-mode transceivers are small form factor pluggable modules for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. The SFP+ 20-pin connector allows hot plug capability.

Modules are designed for single-mode fiber and operate at a nominal wavelength of 1270nm or 1330nm. The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

$107.80
Free Shipping

No reviews

Cleerline 25G SFP28 LR Transceiver SM 1310nm, 10Km reach, Dual LC

25G SFP28 LR Transceiver SM 1310nm, 10Km reach, Dual LC

Cleerline™ SSF-SFP28-25GLR is a high performance 25G/28G LR single-mode and multi-rate SFP28 transceiver using 1310nm wavelength and reaching up to 10Km distance over 9/125um fibers. The module can be used for 25G Ethernet transmissions, and it is the building block of 100G single-mode fiber LR4 type transceivers.

The LR standard is used for medium and short-range fiber connections, due to increasingly popular single-mode fiber plant and very affordable costs. The SFP28 25G transceiver is backwards compatible with the SFP+ 10G rated transceivers.

The transceivers follow the industry standards of SFP Multi-Source Agreement (MSA) and SFF-8472, making them directly interchangeable with any networking device following industry standards.

$140.14
Free Shipping

Select Options

No reviews

Cleerline™ SC/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

SC/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ SC/UPC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ SC/UPC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

From $107.35 - $251.38
Free Shipping

Select Options

No reviews

Cleerline™ SC/APC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

SC/APC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ SC/APC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ SC/APC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

From $127.73 - $297.58
Free Shipping

Select Options

No reviews

Cleerline™ LC/APC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

LC/APC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ LC/APC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ LC/APC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

From $183.44 - $433.46
Select Options

No reviews

SCP Duplex LC Single-Mode Fiber LGX Adapter Plate - OS2 9/125 Adapters (Blue)

SCP Duplex LC Single-Mode Fiber LGX Adapter Plate

The 6 single mode duplex LC enclosure panel populates open panel slots in compatible wall-mount enclosures and rack trays. The panel is compatible with LGX-118 panel slots and features push-pin style mounting tabs for quick installation.

From $52.73 - $133.67

© 2026 FireFold. All rights reserved.

×