Shielded

Cat6 Keystone Jack In 110 Style & Shielded - FireFold

The Cat6 Keystone Jack

The Cat6 jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568A/B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backwards compatible with all previous standards.

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots is in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the smooth trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant, and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. These specific keystones are also shielded, helping to prevent signal degradation and crosstalk.

You can find a variety of keystone wall plates with us, which allow you to customize easily what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Quality to Last a Lifetime

All FireFold keystone jacks come with a lifetime warranty. So, if something goes awry, and it is the product causing the issue, we’ll be more than happy to replace it for you - hassle free! Go ahead and get your hands on one, or many, of these today!

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

The Cat6A Keystone Jack

Each Cat6A jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA-568-B.2-10 industry standard. Because of this standard, these Cat6A Jacks support the operation of 10Gig Ethernet applications. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat6A jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool-required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble-free 110 style termination.

These network jacks are designed with a shielded termination cap that minimizes additional AXT from neighboring connectors. The lead, shielding frame about these provides maximum performance and uninterruptible signal integrity. They also feature twisted-pair separation posts which minimize untwisting of pairs to allow for efficient installation and long-term peak performance.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant, and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but also to allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wall plates with us, which allow you to customize easily what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Quality to Last a Lifetime

All FireFold keystone jacks come with a lifetime warranty. So, if something goes awry, and it is the product causing the issue, we’ll be more than happy to replace it for you - hassle-free! Go ahead and get your hands on one, or many, of these today!

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat5E RJ45 Fully Shielded Inline Coupler - Female to Female RJ45

For connecting two male RJ45 connectors together, you can’t go wrong with the CAT5E-COUP-SHIELD. This professional coupler features two female RJ45 jacks. RJ45 ends are most commonly found as connections on Cat5E and Cat6 data cables, but this particular coupler will only support the speeds of Cat5E. Cat5E cables are most frequently used to connect elements of a network such as modems, routers, switches, and computers. With a built-in chip board, this coupler is designed for reliable performance and speeds of up to a gigabit. This fully-shielded adapter has a silver finish and is specifically designed for straight-through applications. Other couplers are available for those who need a crossover configuration.

These RJ45 couplers can be used with any of FireFold’s Cat5E cables, splitters, or jacks for customized networking solutions. In most cases, Cat5E cables can be run fairly long distances, so feel free to extend without worries. It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.

The Cat5e Keystone Jack - Lifetime Warranty

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backwards compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is shielded with panel-style shielding, helping to prevent most crosstalk. They are packaged individually to ensure quality.

These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. It should be noted that these RJ45 keystones will also work with most patch panels and surface mount boxes, not just wall plates alone.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Quality to Last a Lifetime

All FireFold keystone jacks come with a lifetime warranty. So, if something goes awry and it is the product causing the issue, we’ll be more than happy to replace it for you - hassle free! Go ahead and get your hands on one, or many, of these today!

Cat8 RJ45 Tool Less Shielded Keystone Jack

These CAT8 RJ45 Jacks are designed to work specifically with Cat.8 Solid cable. The contacts on the keystone jack are gold plated, wire alignment insert provides an efficient termination without any need for tools. We do recommend using a cable-cutter to trim off excess wire. The housing of the keystone Jack is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).

Cat8 RJ45 Connectors - Less Shielded

CAT8 RJ45 connectors are designed to work specifically with Cat.8 Cable. The RJ45 contacts are gold plated, wire alignment insert provides an efficient termination without any need of tools. We do recommend to use a cable striper to expose the inner conductors. The housing of the connectors is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).

Cat6 shielded panel mount RJ45 coupler

• 50 micron gold plated contact pin
• IP67 water protection

Choose the Right RJ45 Connectors

Leverage the power of 40G with shielded termination plugs. Your data network is only as strong as your weakest link, so if you're using CAT8 Ethernet cable, make sure you have the correct plugs for the job.

The shielded CAT8 field termination plug is designed specifically for CAT8 bulk cable. This 8 pin 8 conductor (8p8c) plug has 50 micro inch gold plated contacts for superior signal conductivity. The wire alignment insert provides an efficient termination without a crimp tool, although a cable stripper is recommended to prepare the cable for termination. This connector has been rated for PoE and is capable of power transfer.

Why Shield Your RJ45 Connectors?

This connector housing is shielded with zinc die-cast nickel plating. This makes our CAT8 plugs more durable while being less prone to corrosion and rust. All our CAT8 plugs come standard with two different sizes of boots. These boots provide better stress relief support around the connection point of the cable and connector.

The copper foil included with the RJ45 connector will also further shield from any unwanted EMI or crosstalk. So, update your system today so your company can get faster, more efficient conversion rates.

ABA Elite Cat8 RJ45 Field Termination Plug 24 Pack

The ABA Elite Cat8 RJ45 field termination plug makes terminating category 8 cable easier than ever. Save time on your installs with these durable shielded plugs. These are fully compatible with Cat7A or Cat8 riser (CMR) and plenum (CMP) cables, making these a perfect solution if you are wanting to future-proof your network for years to come. Protect your connections from electromagnetic interference (EMI) with these plugs. The tool-less design makes for an efficient connection and punch down. Whether for your home, office, or business, you can trust on these field plugs to boost performance up to 40Gb.

Cat6A High Density FTP Keystone Jack - 10 Pack

CAT6A high-density (HD), FTP shielded modular jacks (8P8C) is designed to deliver advanced performance for 10G applications and backward compatibles with CAT6 and CAT5e systems. CAT6A high-density (HD) FTP die-cast connector and wire cap shields and protects vital network terminations from harmful Electromagnetic Interference (EMI) commonly present around power cables, heavy machinery and external noises that causes alien crosstalk along the path of a signal. CAT6A FTP shielded modular jacks (8P8C) innovative high-density (HD), split pairs termination allows the jack to be terminated with traditional single blade punch down tool or ICC’s 4-pair JackEasy termination tool.

DIN-Rail Feed-Through Adapter, Category 6A, STP, 35-mm, Grounding

Accessories (ACCESSORIES AVAILABLE ARE SHOWN ON THE ENCLOSED SPEC).

Cat6A High Density FTP Keystone Jack - 10 Pack

CAT6A high-density (HD), FTP shielded modular jacks (8P8C) is designed to deliver advanced performance for 10G applications and backward compatibles with CAT6 and CAT5e systems. CAT6A high-density (HD) FTP die-cast connector and wire cap shields and protects vital network terminations from harmful Electromagnetic Interference (EMI) commonly present around power cables, heavy machinery and external noises that causes alien crosstalk along the path of a signal. CAT6A FTP shielded modular jacks (8P8C) innovative high-density (HD), split pairs termination allows the jack to be terminated with traditional single blade punch down tool or ICC’s 4-pair JackEasy termination tool.

S45-WP3200 – Simply45® 10G Rated Waterproof RJ45 Splice Coupler for STP/UTP Cables

Simply45® Waterproof Coupler is an IP68 rated 10G shielded RJ45 double female coupler, allowing you to quickly extend or repair your network in any environment. Built to endure water submersion at any depth. Simply45® waterproof couplers are easy to install and require no special tools. You’ll simply connect the two RJ45 connectors from your cables into the coupler, screw it shut, and secure the waterproof seal. Recommended for outdoor installations, industrial settings, marine environments, and any place where Ethernet connections need to be protected from moisture, dust, or other harmful elements.

Cat6 shielded panel mount RJ45 punch-down keystone jack

• 50 micron gold plated contact pin
• IP67 water protection

Coupler Module, IDC-to-IDC Splice, CAT6A STP, Panel Mounting, IP68

Accessories (ACCESSORIES AVAILABLE ARE SHOWN ON THE ENCLOSED SPEC):
250-ICP68-0A-10 – Sealing Gasket for 250-ICP68-A/C/D Coupler Modules, Internal, Rubber, Pack of 10
250-ICP68-0B-10 – Sealing Gasket for 250-ICP68-A/C/D Coupler Modules, External, Rubber, Pack of 10
250-ICP68-0C0A – Surface Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 1-position
250-ICP68-0C0B – Surface Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 2-position
250-ICP68-0C0C – Surface Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 3-position
250-ICP68-0C1A – DIN-Rail Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 1-position
250-ICP68-0C1B – DIN-Rail Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 2-position
250-ICP68-0C1C – DIN-Rail Mounting Bracket for 250-ICP68-A/C/D Coupler Modules, 3-position

Quest Cat6A Shielded 180 Degree Tooless Keystone Jack

Quest offers a Cat6A Shielded Power Over Ethernet keystone jack with high-speed data transfers over 10Gbps . Our 180 degree 110 IDC jacks are tooless and are easty to terminate. Fits in high-density keystone patch panels, surface mount boxes and face plates.

Quest offers a Cat6A shielded keystone jack solution for secure high-speed 10Gbps data transfers.

Waterproof In-Line/Splice Coupler with Cap

Waterproof IP68 rated, 10G Shielded Double Female RJ45 Coupler for In-Line splice or panel mount with cap, black – 1ea/Blister.

Simply45® Waterproof Coupler is an IP68 rated 10G shielded RJ45 double female coupler, allowing you to quickly extend or repair your network in any environment. Built to endure water submersion at any depth. Simply45® waterproof couplers are easy to install and require no special tools. You’ll simply connect the two RJ45 connectors from your cables into the coupler, screw it shut, and secure the waterproof seal. Recommended for outdoor installations, industrial settings, marine environments, and any place where Ethernet connections need to be protected from moisture, dust, or other harmful elements.

10G Rated Waterproof RJ45 Panel Mount Coupler for STP/UTP Cables

Simply45® Waterproof Coupler is an IP68 rated 10G shielded RJ45 double female coupler, allowing you to quickly extend or repair your network in any environment. Built to endure water submersion at any depth. Simply45® waterproof couplers are easy to install and require no special tools. You’ll simply connect the two RJ45 connectors from your cables into the coupler, screw it shut, and secure the waterproof seal. Recommended for outdoor installations, industrial settings, marine environments, and any place where Ethernet connections need to be protected from moisture, dust, or other harmful elements.

The S45-WP3201 is an IP68 rated 10G shielded RJ45 panel mount coupler. Essential addition when extending a network to an outdoor application. Simply insert into a surface-mount box to create a watertight seal. The waterproof cap protects the RJ45 coupler from dust, debris, and moisture when not in use. Built to endure water submersion at any depth.

Cat6 Shielded Keystone Feed-Thru Coupler – Inline/Slim Style, Cat6 STP, ANSI/TIA 568.2-D, ISO/IEC 11801 Class E. Supports S45 Snap-On ID Bars – Nickel-Plated – 25 EA/BAG

CAT6A Shielded Data Grade Keystone Jack 90° Degree

Platinum Tools Keystone Cat6A Tool-less Shielded Jack

The Platinum Tools Keystone Cat6A Tool-less, Shielded Jack is designed for use with shielded category 6A network cable. These jacks are color coded to 568A or B wiring standards for easy identification and installation. They are compatible with all major industry standard wall plates.