Sale

Networking Made Simple

The Vertical Cable Cat5E Patch Panel is designed to provide amazing performance and cable management. Each Cat5E Patch Panel comes with 110-type termination while meeting and exceeding EIA/TIA TSB-40 Cat5E connecting hardware specifications.

What makes it so simple?

Besides the 110 termination that this network patch panel offers, there are 12 individual Cat5E ports on the front side. Once you get your cables terminated on the one side, you just plug and go on the other. This is a very quick and easy solution for being able to swap out devices at any time. Plus, with numbered ports, you can easily keep track of what is plugged in where for better organization.

Need to mount this up where you won’t be able to reach it so easily? These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit.

What makes these so great?

Each patch bay is a high-density 1.75 inch by 19-inch panel. This product is 1U, with a U (unit) being the standard size for a single rack interval. While others are 2 and 3U, there will be no such waste of space here.

These network panels meet TIA/EIA-568B.2/568B.2-1 Cat.5E ISO/IEC 11801 and EN 50173-1 specifications, so they are up to the latest standards. UL certified, they have been also tested to the highest standard for safety.

Kendall Howard 3U Flanged Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 3U Flanged Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flanged spacer blank is 3U. A U (unit) is the standard size for a single rack interval. While others can be 4U, there will be no such waste of space here. This blank spacer is 19 inches long, which is average for most rack panels. It is .5 inches thick, so it is extremely thin. The blank spacer is also 5.22 inches high, which is standard for a 3U rated space. Plus, this spacer includes tool-less clips that make installation a breeze.

Besides all this, you get a lightweight product that is just under three pounds - making it extremely easy to get mounted up with the rest of your rack panels. And once mounted, the round corners will help you not damage yourself or equipment if they bump into the spacer by accident.

With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Kendall Howard Flat Spacer Blank 3U

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 3U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 3U. A U (unit) is the standard size for a single rack interval. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 5.22 inches high, which is roughly standard for most patch racks that have around 48 ports.

Besides all this, you get a lightweight product that is just above two pounds - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Adjustable Standoff Bracket

The Kendall Howard Adjustable Standoff Bracket is designed to solve the issue of your rack being too deep or too shallow. This Adjustable Standoff Bracket can be set to a minimum depth of 3.5” to a maximum or 6” allowing for more mounting options than ever before! Constructed from 16-gauge steel, these mounts are durable, strong, and dependable. Compatible with all EIA 19” and 23” wide server racks or wall mounts.

• Useable depth: 3.5 to 6
• Material: 16 gauge cold rolled steel
• Color / finish: Black texture powder coat
• Limited lifetime warranty
• 19” EIA compliant
• Made in the USA
• Sold as a pair
• Rack mounting hardware sold separate
• 100 lb max load on four post racks
• 30 lb max load on two post racks

Kendall Howard Enclosed V-Rack Cabinet

The Kendall Howard Enclosed V-Rack Cabinets are the perfect solution for tight spaces, network closets, and small network rooms. The open-back design can fit over most pre-terminated network equipment and is offered in two sizes (3U & 6U). Keep your equipment protected in a Kendall Howard Enclosed V-Rack Cabinet

• 150 lbs. weight capacity
• Adjustable vertical and horizontal mounting rails and vertical sliding rails
• 6" maximum usable depth
• Locking front door
• Hanging bracket for ease of installation
• Solid sides
• Welded frame construction
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard 3 Unit Non-Vented Rack Drawer

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you have before you now is the Kendall Howard Rackmount Drawer. This is a non-vented drawer that is rated for 3U, which means that it is 5.22 inches high. Although it is short in height, it is quite sturdy. This little drawer can handle up to one hundred pounds of weight! That is plenty of durabilities to hold the various tools that you want to be handy on your rack mount.

Details

This rackmount drawer comes with easy-to-remove slides, making installation simple and easy. Each one comes with four mounting screws per “U” space, meaning that this one will come with eight total screws. You’ll be able to get your rackmount drawer tightened into your mounting system in no time. If you want, you can get this drawer also in a 2U and 4U dimension - allowing you, even more, space and flexibility with your rack mount.

Each rack mount drawer has been made in the USA from quality steel. A coating of black powder finish has been put on these, allowing them to easily blend in with any of your previously purchased equipment. Just make sure you have a helping hand when you install this drawer. At a whopping 20.25 pounds, it will be no easy feat for trying to install with only one hand. You can certainly try, though!

These rackmount drawers come with a Limited Lifetime Warranty from Kendall Howard. So, if you damage it for some reason, well..that doesn’t really count. However, if there is a faulty part in any way - we’ve got you covered. What else can we say? Nothing at this point - except go ahead and add this to your cart and get going!

Kendall Howard Non-Vented Cantilever Rack Shelf

The Kendall Howard 3U 16” Component Rack Shelf is one of our heavy-duty component rack shelves. This shelf has a 150-pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPSs. When equipment needs to be put in a rack, ask for Kendall Howard and protect your investment.

3U 16" Component Shelves have 4 mounting holes per U space and rounded corners.

Kendall Howard Non-Vented Centerline Rack Shelf

The Kendall Howard Centerline Solid Rack Shelf is one of the strongest most stable shelves on the market. Unlike most centerline shelves, which may teeter, the Kendall Howard Centerline Shelf is rock solid. The mounting flanges are not only welded onto each side but wrapped completely around the bottom to give it unprecedented stability and strength.

The Kendall Howard Centerline Solid Rack has a maximum weight capacity of 350 pounds and is part of the Heavy Duty Line of Rackmount Component Shelves.

Kendall Howard Centerline Shelves have 4 mounting holes per U space and rounded corners.

The Kendall Howard Centerline Vented Rack Shelf is one of the strongest most stable shelves on the market. Unlike most centerline shelves which may teeter, the Kendall Howard Centerline Rack Shelf is rock solid. The mounting flanges are not only welded onto each side but wrapped completely around the bottom to give it unprecedented stability and strength.

The Kendall Howard Centerline Vented Rack has a maximum weight capacity of 350 pounds and is part of the Heavy Duty Line of Rackmount Component Shelves.

Kendall Howard Centerline Shelves have 4 mounting holes per U space and rounded corners.

Kendall Howard V-Rack - Tapped Rails

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

• Low profile design
• Tapped rails
• Includes 12 10-32 Rack Screws
• No depth restrictions
• 150 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard 1916-2-100 Wall Mount V-Rack

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

These v-racks are low profile, meant to be barely visible from a front view. Each can hold up to 150 pounds easily, so most of your equipment should be able to be on them. They only weigh about 4 pounds themselves, so they are relatively lightweight for easy installation. Each one of these comes in a black powdered finish so that they will blend in with most of your other mounting equipment with ease.

Made in the USA and backed by a limited lifetime warranty from Kendall Howard, you really cannot go wrong with this great product.

What else could you ask for? Well, you might say to yourself, “I could go for a great price.” You’re in luck! You’re at FireFold, where our middle name might as well big ‘great price’. It is not, but, that doesn’t mean you cannot get a price. Just glance up there in the upper right and drool in amazement. You’ll be happy when you make this purchase and so will your wallet!

3U battery pack for SCR3-6000RT rated at 240VDC

3U battery pack for SCR3-10000RT rated at 240VDC

Discover the convenience of the 3U 18" Depth Rack Mountable Charging Shelf - 16 Ports for your organization. Recharge your devices with the headaches of detangling and reorganizing cords.