Sale

Setup.exe - Your Rack Installation Wizard by PATCHBOX

The Setup.exe enables one technician to do the job of two. The Setup.exe secures the weight of equipment, such as switches, in server and network racks until they are securely screwed in. Mounted inside out of a rack the Setup.exe creates the ideal workspace to place a laptop during configuration or terminating a patch panel.

MOUNTED IN SECONDS.

The Setup.exe comes with two spring loaded bolt plungers that safely secure the Setup.exe in place. The brackets can also be adjusted to fit 19" rails with different thicknesses and are made from durable stainless steel. The body of the Setup.exe is aluminum to save weight on your service trips.

MOBILE WORKSPACE.

Easily configure Switches, Servers etc. with two hands while the Setup.exe holds your Laptop for you. One side is rubberized so your Laptop does not slip off.

YOUR IRREPLACEABLE THIRD HAND.

The Setup.exe will become your valuable third hand. No more acts of balancing expensive equipment with one hand while trying to get the screws in with the other. The Setup.exe holds equipment with up to 50kg (110 lbs) for you effortlessly.

YOUR TOOLS WITH YOU ALWAYS.

The Setup.exe has holes to place spare cage nuts in. You can also put some Velcro on it to mount all kinds of tools to it so you always have them with you. Cable ties also have their own spot for times when you need to heavily secure something.

Kendall Howard 8U Pivot Frame Wall Mount Rack

The 8U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack. Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rackmount Brackets.

• Compatible with the 4U and 8U Pivot Frame Wall Mount Rack
• 10-32 tapped rails (10-32 rack screws sold separately)
• Includes 12 10-32 rack screws
• Optional Pivot Frame Wall Mount Rack Cover available (Sold separately)
• Optional Pivot Frame Stationary Rackmount Brackets available (Sold separately)
• 12" depth
• 19" EIA compliant
• 90 degree swing down
• 75 lb. weight capacity
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Linear Fixed Wall Mount Cabinet 

You can trust American-made engineering with the Kendall Howard LINIER Fixed Wall Mount Cabinet. This sturdy cabinet is an economical solution to installs, with a variety of features to help you make the most out of your project.

Multiple knockouts provide cable entry for easy runs while the included cage nut style rails adjust in one-inch increments for maximum versatility. Removable side panels offer easy access to your equipment for maintenance or added ventilation when needed.

The solid, locking door provides additional security for your valuable components. Both the door and side panels are lockable for three-point protection.

• Includes one locking solid door
• Locking side panels
• 250 lb. weight capacity
• One set of cage nut style mounting rails
• Mounting depth: 22.50"
• 19" EIA compliant
• Made in the USA
• 5-Year Limited Warranty

Kendall Howard (9U) Fixed Wall Mount Cabinet

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

If you are looking for the right wall mount rack at the right price, the LINIER brand is the solution for you. The feature rich design gives you a universal enclosure, guaranteed to function for a variety of applications.

Details

What you have here is a great, EID compliant wall rack mount that is rated to hold 250 pounds. In case you ever wonder how much weight that is, it’s roughly the weight of a fully grown kangaroo. That’s right, you have a wall rack mount right here that could hold a kangaroo! Not that you would, we’re just saying.

The cabinet itself weighs 49 pounds, so it will definitely be at least a two person job to install onto the wall. However, once it is set into place, we have a lot of features that will make your life easier. It comes with adjustable rails, removable side panels, and even a reversible glass door. These are all great for accessibility and adjustability once it has been set into place. Plus, you get locking doors and side panels - allowing you to make sure your equipment is safe and secure.

With a sleek black finish and a basic, cost-effective design - you really couldn’t ask for more. You get a five year limit warranty and a great price, so no more excuses. Get your hands on this today for your project! You’ll be glad you did.

Kendall Howard (6U) Wall Cabinet 

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items, in general, are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

If you are looking for the right wall mount rack at the right price, the LINIER brand is the solution for you. The feature rich design gives you a universal enclosure, guaranteed to function for a variety of applications.

Details

What you have here is a great, EID compliant wall rack mount that is rated to hold 250 pounds. In case you ever wonder how much weight that is, it’s roughly the weight of a fully grown kangaroo. That’s right, you have a wall rack mount right here that could hold a kangaroo! Not that you would, we’re just saying.

The cabinet itself weighs 41 pounds, so it will definitely be at least a two person job to install onto the wall. However, once it is set into place, we have a lot of features that will make your life easier. It comes with adjustable rails, removable side panels, and even a reversible glass door. These are all great for accessibility and adjustability once it has been set into place. Plus, you get locking doors and side panels - allowing you to make sure your equipment is safe and secure.

With a sleek black finish and a basic, cost-effective design - you really couldn’t ask for more. You get a five-year limit warranty and a great price, so no more excuses. Get your hands on this today for your project! You’ll be glad you did.

Kendall Howard 12-24 Rack Screws 2500 Pack

Kendall Howard is one of the top companies out in the rack mount market. They provide high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 12-24 Rack Screws are not your everyday hardware store item. The superior American-made quality should be your only choice for installing rack mount devices such as shelves, cable managers, servers, and other networks, A/V and electronic equipment.

Specifications

These 12-24 pilot point rack screws are .75” in length and are compatible with Kendall Howard 12-24 tapped rail system. They can also be used with universal cage nut style rails when used with the 12-24 cage nuts that Kendall Howard provides. Each rack screw comes with a Phillips truss head, so installation is simple. Simply grab your Phillips head screwdriver or bit and get to work!

Every screw is RoHS compliant, meaning that they meet the highest quality and safety standards. Each one has been constructed from steel and finished with a black oxide coating to allow these screws to easily match most standard network racks, cabinets, and accessories.

This specific package comes with fifty in it, so you should have plenty to go around. If this sounds great to you, which it should, go ahead and add some to your cart today.

Kendall Howard 10-32 Rack Screws 2500 Pack

All Kendall Howard 10-32 Rack Screws have a pilot point that helps prevent cross threading and guides the screw when being installed. Kendall Howard rack screws are cold forged and have a black oxide with wax finsh. These truss head screws are .75 inches long and install with any Phillips screwdriver or bit.

Kendall Howard 2 Post Rack Mount Keyboard Tray

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Commercial, military, aerospace, corporate and small office applications alike, the Kendall Howard Rackmount Keyboard Tray will complement them all. This heavy-duty rackmount keyboard tray is one of the most robust pull-out keyboard trays on the market. Don't be fooled by its sleek, low-profile appearance. This rackmount keyboard tray was built to last. The keyboard and touch-pad mouse simply slide out when needed to provide quick and easy access to your network.

Details

This keyboard tray is rated 1U. A U (unit) is the standard size for a single rack interval. While others can be 2U and 3U, there will be no such waste of space here. The tray has a locking feature to help keep it securely closed, even in a mobile rack application. Rather than the typical slides, this one has ball-bearing ones - allowing it to smoothly transition between opened and closed states.

Along with those features, this keyboard rack tray comes with a built-in 107 key QWERTY keyboard with a built-in touchpad mouse. This has a single USB cable and is compatible with Windows 98 and above. The cable to these is securely attached so that it will not bear any damage from wear and tear from usage.

You really cannot go wrong with this great keyboard rack mount. It’s durable, lockable, and easy to install. Look no further and grab one of these for your next project today!

Kendall Howard 48" Power Strip

The Kendall Howard 48" Power Strip combines state-of-the-art electronic protection with a basic but attractive design that is perfect and safe for the home and contemporary workplace. Its sleek shape and design allow for easy mounting to any training table, LAN station or other workstation, but also conveniently cozies up to any wall saving you valuable floor space. If mounting the Power Strip up on a desk, shelf or rack, two mounting brackets are included making installation simple. Complete with 16 outlets, the Kendall Howard 48" Power Strip is suitable for the home, office, or warehouse to house your computers, telephones, lighting fixtures, and more. (The Power Strip can only be installed on Accessory Bars 60" or longer, or the Corner Accessory Bar.)

• 14 ft. power cord
• 1,060 Joules Surge Protection
• 400-volt clamping voltage
• 16 evenly spaced outlets
• 15 amp circuit breaker
• UL Approved
• Can only be installed on Accessory Bars 60" or longer, or the Corner Accessory Bar

Kendall Howard ESD Cabinet 32” x 16” Shelf

The Kendall Howard ESD Cabinet 32” x 16” Shelf provides a solution to support items and devices securely inside the enclosed ESD Cabinet. This easy-to-install shelf is mounted to the inside of the cabinet via the louvered panel and supported with two screws to add to its rigidity and grounds the shelf. An ESD dissipative mat is also included with each shelf to provide an ESD safe storage option.

• ESD protected
• Includes ESD mat
• 100 lb weight limit
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard ESD Cabinet Drawer

The Kendall Howard® ESD Sliding Drawer offers additional storage inside of an enclosed static controlled environment. Drawer sliders will extend out to a maximum of 14” providing easy access to stored items. The drawer is grounded and supported through the sturdy ESD Cabinet frame. Finished off in a gloss black powder coat.

• 100 lb weight capacity
• Sturdy and smooth drawer sliders
• Made in the USA
• Limited Lifetime Warranty

Kendall Howard Fixed Wall Mount Cabinet

The Kendall Howard LINIER Fixed Wall Mount Cabinet has a locking vented door for both increased air flow and added security. This sturdy cabinet is an economical solution to installs, with a variety of features to help you make the most out of your project.

Multiple knockouts provide cable entry for easy runs, while the included cage nut style rails adjust in one inch increments for maximum versatility. Removable side panels offer easy access to your equipment for maintenance, or added ventilation when needed.

The vented, locking door provides additional security for your valuable components. Both the door and side panels are lockable for three-point protection.

• Includes one locking vented door
• Locking side panels
• 250 lb. weight capacity
• One set of cage nut style mounting rails
• Mounting depth: 22.50"
• 19" EIA compliant
• Made in the USA
• 5-Year Limited Warranty

Office Pro 1000 G3 line interactive UPS

• Informative LCD display
• Enhanced 316 joule surge protection circuitry
• RJ45 and Coax surge protection
• Easy change battery
• Automatic Voltage Regulation
• Smart Microprocessor Control
• USB communication port with Free monitoring and shutdown software
• 37 Month Silver Warranty on Electronics and battery
• TAA Compliant

Office Pro 1500 G3 line interactive UPS

• Informative LCD display
• Enhanced 316 joule surge protection circuitry
• RJ45 and Coax surge protection
• Easy change battery
• Automatic Voltage Regulation
• Smart Microprocessor Control
• USB communication port with Free monitoring and shutdown software
• 37 Month Silver Warranty on Electronics and battery
• TAA Compliant

60 month Plus Gold warranty for Network Pro RTX2 1500VA and below. Covers UPS and internal batteries. Orion pays shipping both ways.

60 month Plus Gold warranty for Online RT1/RTX1 1500VA and below. Covers UPS and internal batteries. Orion pays shipping both ways.

Relay 4 card for Orion UPS Systems - Works with Network Pro RTX2, Online RT1/RTX1, SCR3-6000RT, SCR3-10000RT, MSR 20-60kVA

Orion Power Systems SNMP-WEBCARD Works with Network Pro RTX2, Online RT1/RTX1, SCR3-6000RT, SCR3-10000RT, MSR 20-60kVA.

Orion External SNMP 4 communications card.

Orion Environmental Monitoring Probe for temp, humidity, 2 alarm contacts. Must be used with SNMP4 card.

Discover the convenience of the 3U 18" Depth Rack Mountable Charging Shelf - 16 Ports for your organization. Recharge your devices with the headaches of detangling and reorganizing cords.

4K60 1×4 HDBaseT Distribution System

The HT-140U-Rx 4K60 HDBaseT distribution system makes signal distribution simple and effective. Compatibility with virtually every video and audio format means hassle free installation and operation. Our EDID management system makes it easy to select from over 32 EDID tables, alleviating issues of handshaking in all applications.

**To be used with HT-140U (Link)**

4×1 HDMI 2.0 Switcher

The HDTools™ UHDS-41R provides switching of up to four (4) Ultra HD/4K sources to a single Ultra HD/4K display. The UHDS-41R combines the latest technologies, including HDMI 2.0 and HDCP 2.2 support, with user-friendly configuration and operation via RS-232, IR, or front panel control to deliver a simple and effective multi-input A/V switching solution.

Orion Office Pro 1500VA G2 Line Interactive UPS

Note: This product has been discontinued.

• Automatic voltage regulation
• (4) UPS plus (4) surge only protected receptacles
• Data/modem line protection for your small/home office computer and telephone equipment
• All mode surge protection with MOV and Gas Tube Design provides 735 joule protection.
• 37 month Silver warranty covers electronics and battery
• $50,000 load protection guarantee
• Dim. 7" H x 5.9" W x 11.8"D / Weight 24 lbs.

Orion Office Pro 2000VA LCD G2 Line Interactive UPS

Note: This product has been discontinued.

• Automatic voltage regulation
• (4) UPS plus (4) surge only protected receptacles
• Data/modem line protection for your small/home office computer and telephone equipment
• All mode surge protection with MOV and Gas Tube Design provides 735 joule protection.
• 37 month Silver warranty covers electronics and battery
• $50,000 load protection guarantee
• Dim. 7" H x 5.9" W x 11.8"D / Weight 24 lbs.

Kendall Howard Shallow Depth Wall Cabinet

Note: This product has been discontinued.

The Shallow Depth Wall Cabinet is the perfect solution for network and security installations of equipment at or under 16" deep. The Shallow Depth Line of Wall Mount cabinet provides a heightened level of security in a robust welded frame and is offered in three sizes. Keep your valuable networking and security equipment under lock and key.

• 150 lbs. weight capacity
• Adjustable 10-32 tapped rails
• 16.82" maximum usable mounting depth
• Locking acrylic door
• Solid sides
• Hanging bracket for ease of installation
• Welded frame construction
• 19" EIA Compliant
• Made in the USA
• Limited Lifetime Warranty

Bundled, Category-5E Dual, Siamese Style, 24AWG, UTP, 8C Solid Bare Copper, CMR Rated, PVC Jacket, 1000ft, Wooden Spool, Blue

Note: This product has been discontinued.

Replacement Blade, Cu/Al Head

Note: This product has been discontinued.

Replacement cutting blade for Klein's Copper/Aluminum Cutting Jaw (BAT20-7T9). Cuts 750 MCM copper and 1000 MCM aluminum cable. Works with Klein's Battery-Operated Cable Cutter (BAT207T3).

Klein Tools VDV501-824 VDV Scout Pro 2 Tester & Test-n-Map Remote Kit

Note: This product has been discontinued.

Test and identify voice, data, and video connections with the Klein Tools Scout Pro 2 Tester and Test-n-Map Remote Kit. This comprehensive kit includes everything you need to cut your time in half when testing for open, short, miswire, and split-pair faults.

Package Includes

• (1) Scout Pro 2 Tester
• (1) Self-Storing Test-n-Map Remote
• (7) Test-n-Map Remotes
• (1) Coax Barrel F Adaper
• (8) Coax Push-on F Adapters
• (8) RJ45 Jumper Test Cables
• (1) Carrying Case
• (1) 9V Battery
• (1) Manual

Note: This product has been discontinued.

RIVER Pro Extra Battery - Double Capacity, More Power

The RIVER Pro Extra Battery doubles the capacity of RIVER Pro from 720Wh to 1440Wh, giving you the freedom to customize your power for any adventure.

The RIVER Pro weighs just 15.9 lbs and the RIVER Pro Extra Battery weighs 15.4 lbs, making them both portable and easy to transport. The RIVER Pro + Extra Battery can easily fit in a car trunk, on a campsite, or indoors, giving you the power to take your adventure anywhere.

What RIVER Pro + Extra Battery Can Power?

*The duration and times of the appliances indicated in this table are for reference only.

How to Connect the RIVER Pro Extra Battery to the RIVER Pro

1. Power off BOTH the RIVER Pro and RIVER Pro Extra Battery before attempting to connect them together.
2. Open the Power Expansion Port cover on RIVER Pro to access the Power Expansion Port. Connect the Expansion Power Cable to the RIVER Pro Expansion Power Port. Tighten the screws on the Expansion Power port securely.
3. Open the Expansion Port Cover of the RIVER Pro Extra Battery to access the Expansion Power Port. Connect the free end of the Expansion Power Cable to the RIVER Pro Extra Battery Power Expansion Port. Tighten the screws on the Expansion Power port securely.
4. Turn on the power button of the RIVER Pro or RIVER Pro Extra Battery. Fully charge the devices for the first time and ensure the voltage is consistent to maximize the performance. If the display of the RIVER Pro shows the Extra Battery Icon, the connection is successful.

Intellinet 8-Port Gigabit Ethernet Ultra PoE Switch with 4 Uplink Ports and LCD Screen

Note: This product has been discontinued.

8 x PoE ports, IEEE 802.3at (PoE+) Compliant, up to 80 W Power Output per Port, 2 x RJ45 Uplink, 2 x SFP Uplink, 380 W, Endspan, 19" Rackmount

Switch with LCDs and Power over Ethernet output up to 80 watts per port

The Intellinet Network Solutions 8-Port Gigabit Ethernet Ultra PoE Switch with 4 Uplink Ports and LCD Screen passes both data and electrical power to a number of PoE-compatible devices via standard network cables. Equipped with eight Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps. This high-powered switch can inject up to 80 watts of power per port*. IEEE802.3af/at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (e.g., legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Innovative LCD Status Display

This PoE+ switch is equipped with an LCD status screen on the front that provides real-time power information. This includes how much power each connected PoE device consumes, the combined used-power total of all connected devices and the total power available. Additionally, the LCD screen informs users of potential warnings for overload, high temperature, short-circuit protection and others. This feature always keeps you informed about the status of your PoE switch with a glance at the screen.

* Total PoE budget for this switch is 380 watts. Per-port average power distribution is 47.5 watts; maximum per-port power usage cannot exceed 80 watts.