4U

Kendall Howard 1916-2-100 Wall Mount V-Rack

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

These v-racks are low profile, meant to be barely visible from a front view. Each can hold up to 150 pounds easily, so most of your equipment should be able to be on them. They only weigh about 4 pounds themselves, so they are relatively lightweight for easy installation. Each one of these comes in a black powdered finish so that they will blend in with most of your other mounting equipment with ease.

Made in the USA and backed by a limited lifetime warranty from Kendall Howard, you really cannot go wrong with this great product.

What else could you ask for? Well, you might say to yourself, “I could go for a great price.” You’re in luck! You’re at FireFold, where our middle name might as well big ‘great price’. It is not, but, that doesn’t mean you cannot get a price. Just glance up there in the upper right and drool in amazement. You’ll be happy when you make this purchase and so will your wallet!

Kendall Howard V-Rack - Tapped Rails

Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. The V-Racks with 10-32 tapped rails are great for smaller rackmount equipment. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.

• Low profile design
• Tapped rails
• Includes 12 10-32 Rack Screws
• No depth restrictions
• 150 lb. weight capacity
• 19" EIA compliant
• Made in the USA
• Limited Lifetime Warranty

Adjustable Standoff Bracket

The Kendall Howard Adjustable Standoff Bracket is designed to solve the issue of your rack being too deep or too shallow. This Adjustable Standoff Bracket can be set to a minimum depth of 3.5” to a maximum or 6” allowing for more mounting options than ever before! Constructed from 16-gauge steel, these mounts are durable, strong, and dependable. Compatible with all EIA 19” and 23” wide server racks or wall mounts.

• Useable depth: 3.5 to 6
• Material: 16 gauge cold rolled steel
• Color / finish: Black texture powder coat
• Limited lifetime warranty
• 19” EIA compliant
• Made in the USA
• Sold as a pair
• Rack mounting hardware sold separate
• 100 lb max load on four post racks
• 30 lb max load on two post racks

Kendall Howard Patch Panel Brackets make mounting patch panels or shallow equipment simple and easy. When there is no need for a wallmount rack or cabinet, Patch Panel Brackets are a great low cost alternative. The hinged design delivers the functionality of a swing-out wallmount rack without the added cost.

Simply mount the patch panel to the hinged side of the bracket, swing it open and terminate all of the cable. Then use the cable bumps and 6” depth to manage all the cables. When finished, close the bracket and screw the patch panel to the other side.

Kendall Howard 4U Flat Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 4U Flat Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flat spacer blank is 4U. A U (unit) is the standard size for a single rack interval. This blank spacer is 19 inches long, which is average for most rack panels. It is .06 inches thick, so it is extremely thin. The blank spacer is also 6.97 inches high, which is roughly standard for most patch racks that have around 96 ports.

Besides all this, you get a lightweight product that is just below three pounds - making it extremely easy to get mounted up with the rest of your rack panels. With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Kendall Howard 4U Pivot Frame Wall Mount Rack

The 4U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.

• 10-32 tapped rails
• 12" depth
• 90 degree swing down

Kendall Howard 4U Flanged Spacer Blank

Kendall Howard is one of the top companies out in the rack mount market. They provide high-quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

The Kendall Howard 4U Flanged Spacer Blanks are a cut above the rest. Spacer blanks are often used as a way to fill in any gaps and conceal empty rack spaces in a rack or enclosure. The use of filler panels not only makes racks look neat, clean, and organized, but when installed properly they provide added support to the mounting rails. These spacer blanks are also critical for controlling proper airflow, especially in cold aisle/hot aisle applications.

Details

This specific flanged spacer blank is 4U. A U (unit) is the standard size for a single rack interval. This blank spacer is 19 inches long, which is average for most rack panels. It is .5 inches thick, so it is extremely thin. The blank spacer is also 6.97 inches high, which is standard for a 4U rated space. Plus, this spacer includes tool-less clips that make installation a breeze.

Besides all this, you get a lightweight product that is just above three pounds - making it extremely easy to get mounted up with the rest of your rack panels. And once mounted, the round corners will help you not damage yourself or equipment if they bump into the spacer by accident.

With a limited lifetime warranty provided by Kendall Howard themselves, you can’t really go wrong with this product.

Kendall Howard

Kendall Howard is one of the top companies out in the rack mount market. Their merchandise ranges to various products besides rack mounts alone, though, and are always high quality products at a great price. These items in general are not found everywhere, but we at FireFold are helping you get connected to this great manufacturer.

What you have before you now is the Kendall Howard Rack mount Drawer. This is a non-vented drawer that is rated for 4U, which means that it is 6.97 inches high. Although it is short in height, it is quite sturdy. This little drawer can handle up to one hundred pounds of weight! That is plenty of durability to hold your various tools that you want to be handy on your rack mount.

Details

This rackmount drawer comes with easy to remove slides, making installation simple and easy. Each one comes with four mounting screws per “U” space, meaning that this one will come with eight total screws. You’ll be able to get your rackmount drawer tightened into your mounting system in no time. If you want, you can get this drawer also in a 2U and 3U dimension - allowing you even more space and flexibility with your rack mount.

Each rack mount drawer has been made in the USA from quality steel. A coating of black powder finish has been put on these, allowing them to easily blend in with any of your previously purchased equipment. Just make sure you have a helping hand when you install this drawer. At a whopping 23.10 pounds, it will be no easy feat for trying to install with only one hand. You can certainly try, though!

These rackmount drawers come with a Limited Lifetime Warranty from Kendall Howard. So, if you damage it for some reason, well..that doesn’t really count. However, if there is a faulty part in any way - we’ve got you covered. What else can we say? Nothing at this point - except go ahead and add this to your cart and get going!