Rack Power

Quest 19 Inch Horizontal Power Strip with 10 Outlet

Power strips are needed in any setup, it's just a fact of life. This particular necessity will work great for a networking setup, telecommunications installation, or as part of a terminal. It can be configured to a 19" rack and takes up only 1U (unit). There are 10 outlets with 2 in the front and 8 in the back for accessibility and a 15 Amp circuit breaker as a precaution to overload or short circuiting.

19" racks are essentially the standard size that most racks come in, and since this rack is 19" itself, there is no surprise that it is configurable to a rack. It takes up only 1U on a rack so your monster server or patch panel can take up 5. Take your rack with you by having a power strip available when you need it.

Certain cords aren't going to be removed very often; we're talking about power cords to the servers, monitors, patch panels, etc. Not only don't you want to remove them, but you likely don't want to see them, and so that is why there are outlets in the back; there are also outlets in the front. These front outlets allow you to quickly plug in a device (such as a diagnostic tool) to be used immediately where it is needed and then put it away. While simply having a power strip on a rack will allow you to do this, if all of the outlets were on the back it would be inconsiderate on the part of the designers to make you go back there and sift through cables and such.

These devices are made to take on some excess voltage that may overload, short circuit, or otherwise damage the system via an overcurrent. The nice part of a circuit breaker is that once it has done its job you can simply reset the switch and it will serve you again.

Quest HPS-E12P 12 Outlet Power Strip

If power is what you're looking for then you have arrived at the right place. This horizontal rack mount power strip is sure to give your installation a surplus of power that is supplied by 12 outlets. It is paired up with an illuminated rocker power switch and 15 amp circuit breaker and is UL certified. The power strip is a cold rolled steel 14 AWG that is painted in a black micro-finish.

Tripp-Lite Rackmount Server Power Strip RS-0615-R 1U

Tripp Lite's RS-0615-R power strip offers 15 amp capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19 inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-0615-R ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 6 rear-facing NEMA5-15R outlets, 15 ft AC power cord and lighted switch with latching safety cover prevents risk of accidental turn-off.

PLUG/OUTLETS: Input: NEMA 5-15P/Output: 6 Rear-facing NEMA5-15R

ELECTRICAL: 120V AC, 50/60Hz, 15A (Requires standard NEMA 5-15R wall receptacle)

FORMAT: Supports 19 in. rackmount (uses 1 rack space/1U), wallmount, under-counter and more

19 Inch 1U Rackmount PDU with 8 Outlets - Overload Protection, 15A

Rackmounts are an essential part to any business system, as it provides an organized setup for all of your devices. FireFold provides quality controlled rackmount power strips that effectively makes your business run smoother with less down time. This power strip provides a 15 amp power output and features outlets with overload protection.

Manufactured with precision engineering, these rackmount power strips will make a significant difference to your business.

• 15A Max
• 14AWG power cord
• On / Off switch

Note: Mounting screws not included