Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
Quest 10.5 Inch 1 Unit (1U) Vented Cantilever Rack Shelf
$45.23
Free Shipping
Quest ES0219-0115 15 Inch Vented 1U Rack Shelf
These Single-Sided Vented Shelves are commonly used in both open frame racks and floor enclosures. The vented design allows equipment heat to escape from the bottom of the shelf while maintaining the integrity of the shelves’ weight capacity. These shelves come complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
$62.84
Quest 15 Inch 2 Unit (2U) Vented Cantilever Rack Shelf
$55.64
Quest 7 Inch 1 Unit (1U) Vented Cantilever Rack Shelf
$41.03
Quest HPS-E10A 19 Inch 10 Outlet Horizontal Power Strip
Power strips are needed in any setup, it's just a fact of life. This particular necessity will work great for a networking setup, telecommunications installation, or as part of a terminal. It can be configured to a 19" rack and takes up only 1U (unit). There are 10 outlets with 2 in the front and 8 in the back for accessibility and a 15 Amp circuit breaker as a precaution to overload or short circuiting.
19" racks are essentially the standard size that most racks come in, and since this rack is 19" itself, there is no surprise that it is configurable to a rack. It takes up only 1U on a rack so your monster server or patch panel can take up 5. Take your rack with you by having a power strip available when you need it.
Certain cords aren't going to be removed very often; we're talking about power cords to the servers, monitors, patch panels, etc. Not only don't you want to remove them, but you likely don't want to see them, and so that is why there are outlets in the back; there are also outlets in the front. These front outlets allow you to quickly plug in a device (such as a diagnostic tool) to be used immediately where it is needed and then put it away. While simply having a power strip on a rack will allow you to do this, if all of the outlets were on the back it would be inconsiderate on the part of the designers to make you go back there and sift through cables and such.
These devices are made to take on some excess voltage that may overload, short circuit, or otherwise damage the system via an overcurrent. The nice part of a circuit breaker is that once it has done its job you can simply reset the switch and it will serve you again.
$96.34
Quest 10.5 Inch 2 Unit (2U) Vented Cantilever Rack Shelf
$42.82
Quest 10.5 Inch 2 Unit (2U) Non-Vented Cantilever Rack Shelf
These Single-Sided Non-Vented Shelves are the most commonly used non-vented shelves for use in both open frame racks and floor enclosures. They are available with depths of 7″ – 15″, and the non-vented design makes it ideal for an open rack installation where venting is not necessary. These shelves have an equipment weight capacity of up to 41 pounds, based on size of shelf, These shelves are also available in a vented version, and all come complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
$40.43
Select Options
Quest Patch Panel Wall Mount Bracket - 12 Inch Depth
Quest 4U Patch Panel Bracket - 19x12 Inch Wall Mount
From $53.85 - $66.03
Quest 18 Inch 2 Unit (2U) Vented Cantilever Rack Shelf
$63.56
Quest Hinged Patch Panel Wall Mount Bracket - 6 Inch Depth
These Hinged Wall Mount Brackets are a space efficient way of mounting patch panels and networking equipment when floor space is at a premium. These brackets allow easy access to the back of the equipment through use of the built-in swing-out hinge feature. All brackets have a black micro finish for a professional finished appearance.
From $40.79 - $41.05
Quest ES0519-0126 26-32 Inch 1U Adjustable Fixed Heavy-Duty Rack Shelf
Quest 26 to 32 Inch 1 Unit (1U) Adjustable Fixed Heavy-Duty Rack Shelf
$118.99
Quest 26 Inch (37 Inch Ext) 1 Unit (1U) Vented High-Load Capacity Sliding Rack Shelf
This Heavy Duty Slide-Out Shelf is constructed for use in our standard and deep enclosures. Designed with a 4 point mounting system it has a load capacity of up to 150lbs. Also, a slide-out feature which extends out to 37″ in our deeper series 430, 730 and 740 enclosures. It comes complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
$174.47
Quest 10.5 Inch 1 Unit (1U) Non-Vented Rack Shelf
This shelf is a great accessory for any rack mount due to its durability.
$41.63
Quest HPS-E12P 19 Inch 12 Outlet Horizontal Power Strip
If power is what you're looking for then you have arrived at the right place. This horizontal rack mount power strip is sure to give your installation a surplus of power that is supplied by 12 outlets. It is paired up with an illuminated rocker power switch and 15 amp circuit breaker and is UL certified. The power strip is a cold rolled steel 14 AWG that is painted in a black micro-finish.
$92.14
Quest ES0319-0115 15 Inch 1 Unit (1U) Non-Vented Cantilever Rack Shelf
$52.38
Quest Hinged Patch Panel Wall Mount Bracket - 12 Inch Depth
Quest Hinged Patch Panel Bracket with 12 inch depth
From $64.41 - $76.70
Quest DVR Security Lock Box - Vented Hinged Front Door
The Quest SE0920-21-02 Security Enclosure offers solid protection for recording equipment. DVRs and VCRs are secured behind 18AWG steel construction. This box comes with a pre-installed lock and two keys to prevent unauthorized access.
A hinged, vented front door and a pre-installed fan provide maximum air circulation to prevent devices from overheating after extended use. The removable top panel offers easy access to equipment wiring for maintenance.
$205.44
Quest 4" Square Fan, 80 CFM, 110VAC, Black
These 4" Boxer Fans are replacement fans for use in Quest wall mount and floor enclosures. Ideal as replacement fans, as well as expansion fans where additional airflow is required.
$18.81
Quest 1 Unit (1U) Vented Sliding Rack Shelf
This Lightweight Slide-Out Shelf is vented and ideal for use in the smaller 400 & 700 series enclosures. The shelf has an equipment weight capacity of up to 55 pounds, comes complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
$105.86
Quest Cat6 Low-Profile High-Density Patch Panel
From $109.74 - $199.59
Quest Single-Sided Slide-Out Vented Shelf with Adjustable Rails, 19" x 21"-32"D, Black
These Heavy Duty Slide-Out Shelf is constructed for use in our standard and deep enclosures. Designed with a 4 point mounting system it has a load capacity of up to 150lbs. Also, a slide-out feature which extends out to 32" for standard depth 410/710 and 420/720 series enclosures, and 37" in our deeper series 430, 730 and 740 enclosures. It comes complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
$129.68
Quest NPP-6024 Cat6 UTP Patch Panel , 24-Port, 19" Rack Mount, 1U
Quest Cat6 UTP patch panels are designed for 110 IDC termination of RJ45 UTP jacks wired to ANSI/TIA 568A/B standards. Quest offers rack mount panels in 16, 24 and 48 port versions, a 12-port wall mount with an 89D braket, and high density versions. The Cat6 High-Density patch panels are available in 24-port and 48-port versions, and are designed for the customer with limited rack space allowing up to twice as many ports to be terminated in a a single 1U space.
$59.03
Quest 18 Inch 2 Unit (2U) Vented Center Mount Rack Shelf
This Fixed Dual-Sided Vented Shelf is designed for use in standard open frame 2-post floor racks and is vented for better air flow. They are center balanced on the rack to allow for extra support in front and back, and is 18″in depth. Available as a 1-piece design which mounts from front and back of rack. They come complete with a set of #12-24 mounting screws and has a black powder coat micro finish to match rack color.
$86.85
Quest 24 Port Staggered Patch Panel with Rear Cable Management, 1U
$55.65
Quest 19" Cat6A UTP Patch Panel w/ Cable Manager - UL Listed
From $114.12 - $208.17
Quest Single-Sided Non-Vented Cantilever Shelf, Black
These Single-Sided Non-Vented Shelves are the most commonly used non-vented shelves for use in both open frame racks and floor enclosures. They are available with depths of 7" - 15", and the non-vented design makes it ideal for an open rack installation where venting is not necessary. These shelves have an equipment weight capacity of up to 41 pounds, based on size of shelf, These shelves are also available in a vented version, and all come complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
From $30.43 - $45.32
Quest 18 Inch 2 Unit (2U) Non-Vented Double-Sided Center Mount Rack Shelf
$84.16
Quest 15 Inch 3 Unit (3U) Vented Cantilever Rack Shelf
$64.40
Quest Locking Storage Drawer Shelf, 19" x 14"D, Black
These Locking Storage Drawer Shelves are ideal for mounting under keyboard shelves. They provide a safe location to lockup software disks and user manuals in close vicinity to the server control station. They are available in 3.5" and 7" heights. May be used for an open frame rack installation or inside an enclosure. These drawers come complete with a set of #12-24 mounting screws and have a black powdercoat microfinish to match rack and enclosure color.
From $158.29 - $163.26
Quest 25 Inch 2 Unit (2U) Non-Vented Double-Sided 2 Piece Center Mount Rack Shelf
$98.86
Quest Unloaded High Density Keystone Patch Panel
From $35.94 - $48.32
Quest Vented Filler Panel
These Vented Blank Panels are ideal for use in filling gaps in open frame racks and enclosures. They are meant to alleviate the equimpent heat out of an enclosure and to remove the gaps providing a professional finished appearance. These filler panels are also available in a non-vented style, and both types are available in 1U, 2U & 3U sizes. All come complete with a set of #12-24 mounting screws and have a black microfinish to match rack and enclosure color.
From $12.06 - $23.47
Quest Horizontal Rack Mount Surge Strip, 14 Outlets, 120V/20A, 1U, 19", Black
This 14-Outlet Horizontal Power Distribution Units (PDU) is a UL listed surge protected power strip with EMI/RFI protection built-in. It has (6) 120VAC/20A outlets on the front and (8) in the rear, and is constructed with a 6ft power cord with a 3-prong NEMA 5-20 plug, and a safety switch guard to protect inadvertent tripping of the on-off switch. It is ideal for use in both floor enclosures and open frame racks, comes standard with removable vertical mounting brackets and has a black microfinish to match rack and enclosure color.
$131.19
Quest Blank Filler Panel, Black
Quest Non-Vented Filler Panels are ideal for use in filling gaps in open frame racks and enclosures. They are meant to keep the dust out of an enclosure and to remove the gaps providing a professional finished appearance. These filler panels are also available in a vented style, and both types are available in 1U, 2U & 3U sizes. All come complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
From $11.52 - $22.31
Quest 110 Wiring Block
Quest offers 110 style wiring blocks for telephone intallations and wiring cross-connects.
From $16.26 - $16.39
Quest 15 Inch 3 Unit (3U) Non-Vented Single-Sided Rack Shelf
This shelf is a great accessory for any rack mount due to its durability and numerous depth choices. It is featured in cold rolled steel 16 AWG with a black powder coat finish.
$61.82
Quest 19" Cat6A FTP Shielded Patch Panel W/ Manager - UL Listed
From $165.41 - $288.26
Quest Hinged Vertical Wall Mount Bracket, Black (2-4U)
Quest Hinged Vertical Wall Mount Brackets are a space efficient way of mounting patch panels and networking equipment when floor space is at a premium. These brackets allow easy access to the back of the equipment through use of the built-in hinge feature. These brackets are available in 3 standard sizes, and have a black microfinish for a professional finished appearance.
From $57.89 - $81.07
Quest 6' PDU 30 Front 120V/20A Outlets with 15' Cord, Aluminium, Black
Quest vertical Power Distribution Units (PDU) are UL listed and are available in 4ft and 6ft lengths. They are ideal for use in both floor enclosures and open frame racks, and are designed with an extra long 15 ft power cable with a standard 120V AC plug. All come standard with removable mounting brackets and have a black microfinish to match rack and enclosure color.
$194.64
Quest 4' PDU, 18 Front 120V/15A Outlets with 15' Cord, Aluminium, Black
$145.04
Quest Unloaded Fiber Optic Panels (500 Series)
Quest's unloaded fiber optic panels are ideal for loading fiber adapters inside the enclosure. These panels are designed for ST and SC, simplex and duplex adapters.
$5.69
Quest Single-Sided 19″ Non-Vented Shelf , 2U, 15" Depth
These Single-Sided Non-Vented Shelves are the most commonly used non-vented shelves for use in both open frame racks and floor enclosures. They are available with depths of 7″ – 15″, and the non-vented design makes it ideal for an open rack installation where venting is not necessary. These shelves have an equipment weight capacity of up to 41 pounds, based on the size of the shelf, These shelves are also available in a vented version, and all come complete with a set of #12-24 mounting screws and has a black powder coat microfinish to match rack and enclosure color.
$44.94
Quest Single-Sided Vented Cantilever Shelf, 19" x 12"D, Black
These Single-Sided Vented Shelves are commonly used in both open frame racks and floor enclosures. They are available in depths of 7" to 18". The vented design allows equipment heat to escape from the bottom of the shelf while maintaining the integrity of the shelves' weight capacity. These shelves come complete with a set of #12-24 mounting screws and has a black powdercoat microfinish to match rack and enclosure color.
From $47.32 - $51.29
Quest Wall Bracket Kit for DVR Security Enclosure, Set of 2, Black
These Wall Mount Brackets are designed to mount DVR security boxes to the wall in out of reach areas for better protection and security from intruders. They have a black microfinish designed to match the color of Quest DVR boxes.
$56.26
Quest Floor Enclosure Horizontal Quad Fan Assembly, 1U, 19" x 4" x 80 CFM, Black
This Ventilation Unit is constructed of four 4" boxer fans and is ideal for adding additional ventilation to any standard wall or floor enclosure. It is easy to install in a single 1U slot and may be positioned anywhere within a cabinet requiring extra cooling or air flow.
$185.72
Quest Double-Sided Non-Vented Adjustable Shelf, 2U, 19" x 18"D, Black
This Adjustable Fixed Shelf is a non-vented and fixed position shelf that is ideal for use in mounting equipment in most standard floor enclosures and 4-post open frame racks. These shelves are 18" deep and have an equipment weight capacity of up to 120 pounds. They come complete with a set of #12-24 mounting screws and have a black powder coat microfinish to match rack and enclosure color.
$133.69
Quest Keyboard Shelf With Pull-Out Mouse Tray, 1U, 19" x 15"D, Black
This Slide-Out Keyboard & Mouse Shelf is designed for use in standard open frame 2-post floor racks and floor enclosures. It is designed to accommodate most keyboards and has a slide-out mouse shelf. They come complete with a set of #12-24 mounting screws and have a black powder coat microfinish to match rack and enclosure color.
$189.28
Quest Keyboard Shelf With Reversible Mouse Tray, 1U, 19" x 8"D, Black
This Fixed Keyboard & Mouse Shelf is designed for use in standard open frame 2-post floor racks and floor enclosures. It is designed to accommodate most keyboards and has a reversible mouse shelf. They come complete with a set of #12-24 mounting screws and have a black powder-coat microfinish to match rack and enclosure color.
$42.14
×
×