Power

Quest 19 Inch Horizontal Power Strip with 10 Outlet

Power strips are needed in any setup, it's just a fact of life. This particular necessity will work great for a networking setup, telecommunications installation, or as part of a terminal. It can be configured to a 19" rack and takes up only 1U (unit). There are 10 outlets with 2 in the front and 8 in the back for accessibility and a 15 Amp circuit breaker as a precaution to overload or short circuiting.

19" racks are essentially the standard size that most racks come in, and since this rack is 19" itself, there is no surprise that it is configurable to a rack. It takes up only 1U on a rack so your monster server or patch panel can take up 5. Take your rack with you by having a power strip available when you need it.

Certain cords aren't going to be removed very often; we're talking about power cords to the servers, monitors, patch panels, etc. Not only don't you want to remove them, but you likely don't want to see them, and so that is why there are outlets in the back; there are also outlets in the front. These front outlets allow you to quickly plug in a device (such as a diagnostic tool) to be used immediately where it is needed and then put it away. While simply having a power strip on a rack will allow you to do this, if all of the outlets were on the back it would be inconsiderate on the part of the designers to make you go back there and sift through cables and such.

These devices are made to take on some excess voltage that may overload, short circuit, or otherwise damage the system via an overcurrent. The nice part of a circuit breaker is that once it has done its job you can simply reset the switch and it will serve you again.

Vertical Cable 1U PDU with 8 Outlets

Vertical Cable 047-wps-2000 8 Way PDU with Main Switch and Breaker - 1U Power Distribution Unit

Middle Atlantic UPS-RBP Replacement Battery

Hot Swappable Replacement Battery Pack

The hot swappable battery from Middle Atlantic provides up to 26 minutes of run time at full load UPS-1000R or 13 minutes at full load with the UPS-2200R. Keeping one of these handy will ensure you are always prepared for any power loss.

Quest HPS-E12P 12 Outlet Power Strip

If power is what you're looking for then you have arrived at the right place. This horizontal rack mount power strip is sure to give your installation a surplus of power that is supplied by 12 outlets. It is paired up with an illuminated rocker power switch and 15 amp circuit breaker and is UL certified. The power strip is a cold rolled steel 14 AWG that is painted in a black micro-finish.

Xtreme J60-350 120V Lithium UPS

Slim and light weight J60 Lithium UPS provides power outage protection for your critical electronics

Xtreme Power J60 provides the benefits of lithium battery technology in a slim form factor UPS. J60 is ideal for providing continuous power where a conventional UPS will not fit.

Lithium battery technology allows J60 to operate continuously at up to 40oC (104oF) without reduction in battery life.

J60’s compact design is excellent for providing protection to automation systems, video walls, PoE Switches, programmable logic controller (PLC), kiosks, industrial computers, and point-of-sale (POS) equipment.

Product Snapshot

Slim and light weight (1.25” and 3.4 lbs) the J60 mounts easily behind flat panel displays

• Power outage protection from 6 minutes to hours
• Lithium batteries provide high temperature performance with long term reliability
• UL-1778, cTUVus, FCC, RoHSCE, RoHS, TAA compliant (120V)
  CE, RoHS, TAA compliant (230V)
• Brackets allow easy mounting to wall, ceiling or any flat surface
• Primary applications: digital signage, kiosks, gaming machines, and Point of Sale (POS)
• 5 years electronics, 5 years battery warranty (USA and Canada)

Middle Atlantic Rackmount Power Strip PD-815R-PL

The PD-815R-PL from Middle Atlantic provides 8 rear outlets and a 9ft power cord, with plenty of power for all your rackmounted components. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-815R-PL carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

Middle Atlantic Rackmount Power Strip PD-915R 

The PD-915R from Middle Atlantic provides 8 rear outlets with one front convenience outlet and a 9ft power cord, with plenty of power for all your rackmounted components. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-915R carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

Tripp-Lite 1U Rack-Mount Power Strip RS-1215-RA

1U Rack-Mount Power Strip, 120V, 15A, 5-15P, 12 Outlets (Right-Angled Widely Spaced), 15-ft. Cord

• 12 NEMA 5-15R outlets are spaced apart to accommodate bulky transformers
• Lighted on/off switch with plastic cover is protected against accidental turn-off
• 15 ft. cord with NEMA 5-15P plug is long enough to reach distant AC outlet
• Versatile installation on wall, under counter or in 1U of rack space

Z-ATS Micro Auto Transfer Switch, High Voltage, 1 ft. C13 Y-Cord Output with C14 Input Cords

The Z-ATS Micro provides you with assurance that your IT gear will remain operational through maintenance cycles or power failures, thus minimizing downtime. Designed specifically to overcome the challenges presented by single corded devices, the Z-ATS Micro automatically switches from the primary power source (A) to the backup source (B) as needed, guaranteeing redundant power to connected devices at all times.

The Z-ATS Micro can switch between power sources at any phase angle, even 180 degrees out of phase. It is also a one-to-one solution, which means that there is a separate Z-ATS Micro for each IT component. At the size of a cell phone, the Micro is the smallest device of its kind on the market and does not take up valuable rack space.

Tripp-Lite Rackmount Server Power Strip RS-0615-R 1U

Tripp Lite's RS-0615-R power strip offers 15 amp capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19 inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-0615-R ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 6 rear-facing NEMA5-15R outlets, 15 ft AC power cord and lighted switch with latching safety cover prevents risk of accidental turn-off.

PLUG/OUTLETS: Input: NEMA 5-15P/Output: 6 Rear-facing NEMA5-15R

ELECTRICAL: 120V AC, 50/60Hz, 15A (Requires standard NEMA 5-15R wall receptacle)

FORMAT: Supports 19 in. rackmount (uses 1 rack space/1U), wallmount, under-counter and more

Tripp-Lite Single-Phase Basic PDU1.8 kW PDU1215

The PDU1215 1.8kW Single-Phase 120V Basic PDU is the perfect no-frills unit for networking, telecom, security, audio/video and sound reinforcement applications. Perfectly suited for high-density IT environments, the PDU1215 features a single breakered load bank with 13 NEMA 5-15R outlets—12 in the rear and one in front. The NEMA 5-15P input plug with long 15-ft. (4.57 m) cord connects to your facility's compatible AC power source, generator or protected UPS to distribute power to connected equipment.

The switchless design prevents an accidental shutdown, which could lead to costly downtime. A 15A circuit breaker protects connected equipment from dangerous overloads. The reversible all-metal housing mounts in 1U of space in EIA-standard 19-inch racks, as well as on a wall or workbench or under a counter. With a compatible rack and Tripp Lite's PDUSIDEBRKT accessory (sold separately), you can adapt the PDU1215 for vertical 0U rack-mounting.

1.4kW Single-Phase Metered PDU, 120V Outlets (13 5-15R), 5-15P, 100-127V input, 6ft Cord, 1U Rack-Mount

•  Local metered single phase 12A 100-127V PDU
• 1U horizontal rackmount, Digital current meter
• NEMA 5-15P input with 6ft / 1.8m line cord
• 13 NEMA 5-15R outlets (1 front / 12 rear)
• Reversible housing, 4.5 in / 11.4cm depth

SmartPro LCD 120V 1500VA 900W Line-Interactive UPS, AVR, 2U Rack/Tower, LCD, USB, DB9 Serial, 8 Outlets

Provides complete battery backup and pure sine wave power output for your desktop computer, network workstation, audio/video components or media center.

• Protects equipment against blackouts, brownouts, overvoltages, surges and line noise
• Keeps AC power running during blackouts to allow time for file saves and safe shutdown
• Maintains continuous 120V nominal output during brownouts and overvoltages
• ENERGY STAR-certified to save electricity, lower costs and protect the environment
• Front-panel LCD reports detailed voltage, runtime, load and battery information

Tripp-Lite 14-Outlet Server Surge Protector DRS-1215

DRS-1215 offers surge and noise suppression in a versatile all-metal multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch EIA-standard rack. Includes 14 outlets (6 front/8 rear), 15-foot (4.6-meter) cord and guarded power switch to reduce the risk of accidental shutoff. Diagnostic LED indicates surge protection status.

• 14 outlets / 15-ft. (4.57 m) cord
  
• 3000 joule rating
  
• Adjustable rackmount hardware

Tripp-Lite RS-1215-20T 1U Rack-Mount Power Strip

Tripp Lite's RS-1215-20T Power Strip offers 20A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rackmount, wallmount and under-counter installation. Uses only 1 rack space (1U) when installed in any 19-in. rack meeting EIA standards. Unfiltered electrical pass-through makes RS-1215-20T ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA5-15/20R outlets (6 front/6 rear), 15-ft. AC power cord with locking NEMA L5-20P input plug and lighted switch with cover that prevents risk of accidental turn-off.

1U Rack-Mount Power Strip, 120V, 15A, 5-15P, 12 Outlets (6 Front-Facing, 6-Rear-Facing), 15-ft. Cord

The RS-1215 Power Strip offers 15A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch rack meeting EIA standards. Unfiltered electrical pass-through makes RS-1215 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA 5-15R outlets (six front/six rear), 15-foot (4.6-meter) cord and lighted switch with cover prevents risk of accidental turn-off.

• Designed for standard 19-inch racks (1U high)
• 12 outlets (6 front / 6 rear)
• 15-amp circuit breaker
• 15-ft. (4.57 m) cord

Middle Atlantic Rackmount Power PD-915RC-20

The PD-915RC-20 from Middle Atlantic provides 8 rear outlets with one front convenience outlet and a 20ft power cord, giving you the opportunity to run a longer distance to the wall. All outlets are designated for NEMA 5-15R plugs and have a maximum derated load of 12 Amps.

The PD-915RC-20 carries a single-stage surge and spike protector and EMI filtering, giving you an uninterrupted signal and added safety against surge events. It also has an instantaneous response time (1 nanosecond) to surge events.

Great Lakes Rackmount Power Strip 

The Great Lakes 7215-S Vertical Rackmount Power Strip is designed for standard 19 inch rack mounting. It features 16 surge-protected receptacles.

Great Lakes Power Strip 7215 - 19" Server Rack

The Great Lakes 7215 Vertical Rackmount Power Strip features 16 receptacles and is designed for 19 inch vertical rack mounting.

Xtreme J60 - 600 120V Lithium UPS

Slim and light weight J60 Lithium UPS provides power outage protection for your critical electronics

Xtreme Power J60 provides the benefits of lithium battery technology in a slim form factor UPS. J60 is ideal for providing continuous power where a conventional UPS will not fit.

Lithium battery technology allows J60 to operate continuously at up to 40oC (104oF) without reduction in battery life.

J60’s compact design is excellent for providing protection to automation systems, video walls, PoE Switches, programmable logic controller (PLC), kiosks, industrial computers, and point-of-sale (POS) equipment.

Product Snapshot

Slim and light weight (1.25” and 3.4 lbs) the J60 mounts easily behind flat panel displays

• Power outage protection from 6 minutes to hours
• Lithium batteries provide high temperature performance with long term reliability
• UL-1778, cTUVus, FCC, RoHSCE, RoHS, TAA compliant (120V)
  CE, RoHS, TAA compliant (230V)
• Brackets allow easy mounting to wall, ceiling or any flat surface
• Primary applications: digital signage, kiosks, gaming machines, and Point of Sale (POS)
• 5 years electronics, 5 years battery warranty (USA and Canada)

Tripp Lite Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital meter. Enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.

1U Rack-Mount Power Strip, 120V, 20A, 5-20P, 12 Outlets (6 Front-Facing, 6-Rear-Facing) 15 ft. (4.57 m) Cord

The RS-1215-20 Power Strip offers 20A capacity AC power distribution in a versatile multi-mount cabinet. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation. Uses only 1U when installed in any 19-inch rack, meeting EIA standards. Unfiltered electrical pass-through makes RS-1215-20 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets and more. Includes 12 NEMA 5-20R outlets (six front/six rear), 15-foot (4.6-meter) cord and lighted switch with cover prevents risk of accidental turn-off.

• Designed for standard 19-inch racks (1U high)
• 12 outlets (6 front / 6 rear)
• 15-ft. (4.57 m) cord
• 20-amp circuit breaker

Middle Atlantic PDT-1415C Power Strip

The PDT-1415C from Middle Atlantic provides a slim, mountable power solution that mounts easily inside of your rack while taking up minimal space. The evenly distributed 14 outlets give you plenty of space and opportunities to manage all of your components power supplies. This PDT Series power strip offers a basic, single stage surge protection as well.

The PDT-1415C features a SignalSafe™ power chord that helps eliminate AC magnetic fields and is compatible with NEMA 5-15P plugs. It also feature a single stage surge protector.

Middle Atlantic PD-2415SC Slim Power Strip

The PD-2415SC from Middle Atlantic offers 24 outlets in a 5ft long slim designed power strip that easily mounts to your rack to accommodate a range or plug in power supplies.

The PD-2415SC features a single stage surge protection and EMI filtering helping ensure your components protection. With a 10' SignalSAFE™ power cord, AC magnetic fields will be virtually eliminated.

Middle Atlantic PDT-1020C-NS Power Strip

The PDT-1020C-NS from Middle Atlantic provides a slim, mountable power solution that mounts easily inside of your rack while taking up minimal space. The evenly distributed 10 outlets give you plenty of space and opportunities to manage all of your components power supplies.

The PDT-1020C-NS features a 9ft SignalSafe™ power chord that helps eliminate AC magnetic fields and is compatible with NEMA 5-20P plugs.

Great Lakes 7215-20AR Power Strip 

The Great Lakes 7215-20AR Vertical Rackmount Power Strip is designed for standard 19 inch rack mounting. It features 16 surge-protected receptacles.

Great Lakes 7218-24 Power Strip

The Great Lakes 7218-24 Vertical Rackmount Power Strip features 8 surge-protected receptacles and is designed for 19 inch rack mounting.

HIDEit ProAVPB Universal Power Brick Server Rack Mount

Need a better solution for external power supplies in a server rack? The HIDEit ProAVPB is a uniquely designed rack mount that fits most computer hardware power bricks for easy storage and cable management! This power brick mount is small enough to fit within the space of most server racks and features tabs that align with rack rails for easy installation. Multiple cutouts allow for zip ties or other tie-downs to ensure the ac adapter stays in place no matter the orientation. As a bonus, you can use the HIDEit ProAVPB as a wall mount or attach magnets to stick to the rack. The HIDEit ProAVPB Mount is the perfect solution to complete your cord management project!

Zonit Z-ATS Micro Auto Transfer Switch, Low Voltage, 1 ft. 5-15R Y-Cord Output with 5-15P Input Cords

The Z-ATS Micro provides you with assurance that your IT gear will remain operational through maintenance cycles or power failures, thus minimizing downtime. Designed specifically to overcome the challenges presented by single corded devices, the Z-ATS Micro automatically switches from the primary power source (A) to the backup source (B) as needed, guaranteeing redundant power to connected devices at all times.

The Z-ATS Micro can switch between power sources at any phase angle, even 180 degrees out of phase. It is also a one-to-one solution, which means that there is a separate Z-ATS Micro for each IT component. At the size of a cell phone, the Micro is the smallest device of its kind on the market and does not take up valuable rack space.

Zonit Z-ATS Micro Auto Transfer Switch, Low Voltage, 1 ft. C13 Y-Cord Output with 5-15P Input Cords

The Z-ATS Micro provides you with assurance that your IT gear will remain operational through maintenance cycles or power failures, thus minimizing downtime. Designed specifically to overcome the challenges presented by single corded devices, the Z-ATS Micro automatically switches from the primary power source (A) to the backup source (B) as needed, guaranteeing redundant power to connected devices at all times.

The Z-ATS Micro can switch between power sources at any phase angle, even 180 degrees out of phase. It is also a one-to-one solution, which means that there is a separate Z-ATS Micro for each IT component. At the size of a cell phone, the Micro is the smallest device of its kind on the market and does not take up valuable rack space.

Zonit Z-ATS Micro Auto Transfer Switch, Low Voltage, Integrated C13 Output with 5-15P Input Cords

The Z-ATS Micro provides you with assurance that your IT gear will remain operational through maintenance cycles or power failures, thus minimizing downtime. Designed specifically to overcome the challenges presented by single corded devices, the Z-ATS Micro automatically switches from the primary power source (A) to the backup source (B) as needed, guaranteeing redundant power to connected devices at all times.

The Z-ATS Micro can switch between power sources at any phase angle, even 180 degrees out of phase. It is also a one-to-one solution, which means that there is a separate Z-ATS Micro for each IT component. At the size of a cell phone, the Micro is the smallest device of its kind on the market and does not take up valuable rack space.

Kendall Howard 48" Power Strip

The Kendall Howard 48" Power Strip combines state-of-the-art electronic protection with a basic but attractive design that is perfect and safe for the home and contemporary workplace. Its sleek shape and design allow for easy mounting to any training table, LAN station or other workstation, but also conveniently cozies up to any wall saving you valuable floor space. If mounting the Power Strip up on a desk, shelf or rack, two mounting brackets are included making installation simple. Complete with 16 outlets, the Kendall Howard 48" Power Strip is suitable for the home, office, or warehouse to house your computers, telephones, lighting fixtures, and more. (The Power Strip can only be installed on Accessory Bars 60" or longer, or the Corner Accessory Bar.)

• 14 ft. power cord
• 1,060 Joules Surge Protection
• 400-volt clamping voltage
• 16 evenly spaced outlets
• 15 amp circuit breaker
• UL Approved
• Can only be installed on Accessory Bars 60" or longer, or the Corner Accessory Bar

Orion Power Systems Online RTX1 2000VA

• 2U Rack/Tower Convertible Design
• True Online Double Conversion Design with Sine Wave Output
• 2000VA/ 1930 watt capacity provides 4 minutes of battery runtime at full load
• 120V input/output with (8) 5-20 output receptacles and NEMA 5-20P Plug
• RS232 Serial and USB Interfaces
• Software is included to monitor UPS and gracefully shutdown or restart UPS connected equipment during an extended power failure
• 37 month electronics / 37 month battery No Hassle Warranty
• $150,000 LIFETIME load protection guarantee
• Dim. 3.5"H x 18"W x 21"D / Weight 43 lbs.

Ultimate Power Quality

Ensure your sensitive equipment lasts longer and is more reliable by supplying it with quality power. The Online RT1/RTX1 series uses double conversion technology to regulate voltage +/- 1% and outputs a pure sine wave. During a power outage, there is no transfer time when going to battery power.

Advanced Communications

Online RT1/RTX1 features advanced SNMP communications. SNMP Monitoring includes voltage in/out, battery time remaining, power logs, UPS specific information, and remote outlet control. Receive alerts via text or email for the following: on battery, battery fail, battery change due, UPS warranty expired, and more.

LCD Display

State of the Art LCD display rotates to accommodate tower or rack mount installations. Provides real time status information and allows configuration of UPS setup parameters. LCD display reports volts in, volts out, runtime remaining in minutes, percentage load, and more.

Hot-Swappable Batteries

Maintenance is easy and inexpensive with user replaceable, hot-swappable battery trays. Save money on maintenance by using in-house personnel to change batteries when necessary.

Orion 3000VA Systems Network Pro RTX2 Line Series

• 2U Rack/Tower Convertible Design
• Line Interactive Design with AVR
• Sine Wave Output
• 3000VA/ 2700 watt capacity provides 5 minutes of battery runtime at full load
• Allows add on battery packs for extended backup times
• 120V input/output with (6) 5-20R (1) L5-30R output receptacles and 7.5 foot line cord with NEMA L5-30P Plug
• RS232 Serial and USB Interfaces
• Software is included to monitor UPS and gracefully shutdown or restart UPS connected equipment during an extended power failure
• Includes Gold Plus 37 month electronics / 37 month battery No Hassle Warranty
• $150,000 LIFETIME load protection guarantee
• Dim. 3.5"H x 18"W x 25"D / Weight 65 lbs

Clean Power Quality

Ensure your sensitive equipment lasts longer and is more reliable by supplying it with quality power. The Network Pro RTX2 uses AVR to provide regulated voltage and outputs a pure sine wave.

Advanced Communications

Network Pro RTX2 features advanced SNMP communications. SNMP monitoring includes voltage in/out, battery capacity remaining, power logs, UPS specific information, and remote outlet control. Receive alerts via text or email for the following: on battery, battery fail, battery change due, and more.

LCD Display

State of the Art LCD display rotates to accommodate tower or rack mount installations. Provides real time status information and allows configuration of UPS setup parameters. LCD display reports Volts in, Volts out, battery capacity, load level, and more.

Hot Swappable Batteries

Maintenance is easy and inexpensive with user replaceable, hot-swappable battery trays. Save money on maintenance by using in-house personnel to change batteries when necessary.

FORGE Vertical Rack Mount PDU, 18 Outlets

With 18 outlets spaced to make room for all types of plugs and cords, the R-PDU-18-34U puts the finishing touch on any Forge™ freestanding rack install 36U or taller. Great features like surge protection, reversible mounting ears and not using any U space on the front of the rack make this a great power management solution.

Quest 6' PDU 30 Front 120V/20A Outlets with 15' Cord

Quest vertical Power Distribution Units (PDU) are UL listed and are available in 4ft and 6ft lengths. They are ideal for use in both floor enclosures and open frame racks, and are designed with an extra long 15 ft power cable with a standard 120V AC plug. All come standard with removable mounting brackets and have a black microfinish to match rack and enclosure color.

Quest 4' PDU, 18 Front 120V/15A Outlets

Quest vertical Power Distribution Units (PDU) are UL listed and are available in 4ft and 6ft lengths. They are ideal for use in both floor enclosures and open frame racks, and are designed with an extra long 15 ft power cable with a standard 120V AC plug. All come standard with removable mounting brackets and have a black microfinish to match rack and enclosure color.

500VA 300W 120V Line-Interactive UPS - 6 NEMA 5-15R Outlets, USB, DB9, Network Card Option, 1U Rack/Tower

Tripp Lite's SMART500RT1U intelligent, line-interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14.6 minutes half load runtime and 3.2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup.

Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. PowerAlert UPS monitoring and unattended shutdown software is available for free download. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.

1.9 kW Single-Phase Metered PDU, 120V Outlets (28 5-15/20R), L5-20P/5-20P Adapter, 15ft Cord, 0U Vertical

• Local Metered single phase 120V 16A 0U 60in / 152cm vertical rackmount PDU
• Two-digit current meter reports output current in amps
• Attached 15-ft. (4.57 m) cord with NEMA L5-20P plug and 5-20P adapter
• 28 NEMA 5-15/20R outlets
• Toolless button mount and bolt-down bracket installation hardware included

Tripp-Lite SNMP Management Accessory Card for UPS Systems

SNMP/Web Management Accessory Card, SmartPro or SmartOnline UPS Systems

2kW Single-Phase Local Metered PDU + ISOBAR Surge Suppression, 3840 Joules, 100-127V Outlets

• Local Metered single phase 16A 120V PDU with ISOBAR Surge Suppression
• 1U Horizontal rackmount, Digital current meter
• 3840 Joule suppression rating, Diagnostic LEDs
• NEMA L5-20P input with 5-20P adapter; 15-ft. / 4.57 m line cord
• 12 NEMA 5-20R outlets (rear), 2 5-15R outlets (front)
• Reversible housing; 4.5in /11.4cm depth

Middle Atlantic Power Strip PDCOOL-1115R

The PowerCool™ Series from Middle Atlantic offers a space saving integrated power and cooling solution all in one rack unit sized mount. With a smart fan, the speed is proportional to the temperature of the enclosure to extend fan life and eliminate dust and debris allowing less maintenance.

With a 50 CFM fan operating at a quite 29dB, the PDCOOL-1115R exhausts heat from hot equipment only when needed, making this model highly energy efficient.

The PDLT Series from Middle Atlantic features an onboard dimmable LED bar perfect for viewing components mounted below. As well as providing light, the PDLT-815RV-RN gives you 8 2 stage surge protected outlets in the rear for plugging up all your equipment neatly and safely. With a "clean ground" surge suppressor design, you can rest assured that no noise contamination will pass through to the ground.

As well as the front lighting, the rear of the PDLT-815RV-RN features 2 USB ports, perfect for additional LED gooseneck lights to be plugged in.

The Great Lakes 7219-20AR Rackmount Power Strip features 6 receptacles and is designed for 19 inch rack mounting.

Case and Cabinet

Great Lakes Case & Cabinet is a leading manufacturer of racks, wall mount and free-standing enclosures, technical furniture, and command center systems. Their influence stretches through the data, communication, broadcast, sound and security industries. They have been industry leaders for more than 25 years, so you know that you are getting quality products when you make a purchase. We are proud here at FireFold to bring you this great company as an option for your home or business networking needs.

Your Powers Combined

Once you get your rack setup and configured, you sometimes just want power that is directly on it. That is no problem! The Great Lakes 7219 is a six position power strip that is designed for 20 amps. It is a 125V strip with a built-in circuit breaker for 19″ server rack mounting. The 15' power cable gives you plenty of distance to work with just in case your power receptacle is not right next to your rack.

This sturdy, UL listed product comes with a one year manufacturer warranty. Although you won’t get some sort of miracle out of this product, you will feel like you’ve been blessed with the simplicity it provides. You could easily buy several of these, properly spaced, and perhaps make an entire rack of them if you really wanted. Have a power party!