PoE Power over Ethernet

Enable-IT Automotive Mobile Gigabit PoE 6 Port Switch

The Enable-IT 8805M Automotive / Marine 6 port Gigabit PoE Switch is a unique product. It can automatically detect any LAN device and determine if it is a PoE device and supply power with IEEE 802.3af/at standard voltage and watts.

The Enable-IT 8805M Automotive / Marine 6 port Gigabit PoE Switch has 5 dedicated 10/100/1000Mbps Auto- Negotiation RJ-45 LAN ports with each port PoE auto detect enabled. Auto detect PoE uses IEEE 802.3 PoE Power Detection (PD). There is no need to worry about the damage of PoE being applied to Non-PoE Devices and PoE connected devices are supplied with up to 30W per port.

The Gigabit PoE Switch supplies PoE electrical power on industry standard 2-pair (RJ-45 pins 4/5 positive and 7/8 negative) along with Ethernet data in one single cable allowing you to expand your network where there are no power lines or outlets. This enable you to deploy PoE devices such as WiFi Access Points, PoE IP Cameras, Poe Access controls or PoE IP Phones.

This Gigabit PoE Switch supports Gigabit PoE extension up to 3,500ft by using our 865X PRO Gigabit PoE Extender kit.

Intellinet Industrial Gigabit PoE++ Splitter

IEEE 802.3bt (4PPoE) Compliant, up to 60 W Input, 12 V / 4.25 A DC Output, IP30-rated Metal Housing, DIN-rail Mount

Turn a higher-power PoE link into separate DC/terminal-block power and Gigabit data connections

Need power but don’t have an outlet? Take it from your PoE network with the Intellinet Industrial Gigabit PoE++ Splitter. With a simple Ethernet cable connected to your PoE++ Switch or injector, this Splitter can give up to 51 W to a non-PoE device in tough or industrial environments via your choice of output — a 2-pin terminal block or a DC jack — and still provide a gigabit network connection. It’s a great choice for non-PoE cameras, laptops, and other devices that require a power adapter, and it’s cheaper in both time and money than hiring an electrician.

TP-Link 5-Port Gigabit Desktop Switch with 4-Port PoE

PoE Switches for Your Ultra Convenience

5-Port Gigabit Desktop Switch with 4-Port PoE, TL-SG1005P

Power over Ethernet

4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).

Intelligent Power Management

When total power consumption excels 56W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.

Sturdy Metal Casing

Sturdy, compact metal casing and shielded RJ45 ports, with desktop/wall-mounting design, to meet your needs in any environment. Besides, the fanless design ensures quiet operation.

Enable-IT 8805 6 Port Gigabit PoE Switch - Firefold

The Enable-IT 8805 Gigabit PoE Switch is a unique product. It can automatically detect any LAN device and determine if it is a PoE device and supply power with IEEE 802.3af standard voltage and watts.

The Enable-IT 8805 Gigabit PoE Switch has 4 dedicated 10/100/1000Mbps Auto-Negotiation RJ-45 LAN ports with each port PoE auto detect enabled. Auto detect PoE uses IEEE 802.3 PoE Power Detection (PD). There is no need to worry about the damage of PoE being applied to Non-PoE Devices and PoE connected devices are supplied with up to 30W per port.

The Gigabit PoE Switch supplies PoE electrical power on industry standard 2-pair (RJ-45 pins 4/5 positive and 7/8 negative) along with Ethernet data in one single cable allowing you to expand your network where there are no power lines or outlets. This enable you to deploy PoE devices such as WiFi Access Points, PoE IP Cameras, PoE Access controls or PoE IP Phones.

This Gigabit PoE Switch supports Gigabit PoE extension up to 3,500ft by using our 865X PRO Gigabit PoE Extender.

Enable-IT 61W - 56VDC Gigabit PoE Injector

The Enable-IT 360 60W 56V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3 AF/AT/BT(type 3) compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

The Enable-IT 360 Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3 AF/AT/BT compliant device, the Injector uses all 4 pair in a category rated wiring bundle. i.e. CAT5e or better run required for Gigabit Ethernet.

The Enable-IT 360 is a 60W 56V DC Gigabit PoE Injector supports both 2-pair and 4-pair PoE output and is ideal for installing high powered IP PoE devices up to 3,500ft when used in conjunction with an Enable-IT PoE Extender.
As will all PoE voltage drops over distance. As a rule of thumb you can lose up to 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.

Enable-IT 1-Port Gigabit PoE Extender Kit

The Enable-IT 865X PRO Black Box Gigabit PoE Extender is a Gigabit wire speed throughput PoE Extender. World’s Fastest and Secure, copper (Power over Ethernet) PoE Extender period, Guaranteed!

Designed & Made in the USA with quality and pride. The American-made Enable-IT 865X PRO Black Box Gigabit PoE Extender over copper uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.

We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865X PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs.We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 865X PRO Black Box Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865X PRO kit uses 4-pair copper wiring (CAT 2 Telephone wire all the way up to CAT 7 rated). The 865X PRO Gigabit PoE Extender can support up to 9 CPE units on the same 4-pair of wire.

Leverage any 4-pair of existing or new wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Single port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT PoE Ethernet Extender Kit 1-Port

The Enable-IT™ 821P PoE Extender (Power over Ethernet) is the fastest encrypted and Secure PoE Ethernet Extender on the planet bar none!

Designed & Made in the USA with quality and prideful Craftsmanship!
This American-made EnableIT 821P PoE Ethernet Extender kit uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the 821P PoE )Power over Ethernet) Extender kit, along with its entire product line, in the USA that makes us more responsive to customer demanding needs. We use the highest quality materials and craftsmanship.

This is trusted a Business Reliable Professional Grade PoE Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

You can leverage existing Telephone wire all the way up to Category rated CAT 7 twisted pair to deploy your extended PoE devices vs expensive fiber that is unable to deliver PoE Power and is susceptible to extreme cold and movement damage.

Leverage existing or new wiring that is contiguous all the way up to 1,640ft (500m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

PoE Ethernet Extender coupled with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

Intellinet Gigabit High-Power PoE+ Extender Repeater

IEEE 802.3at/af Power over Ethernet (PoE+/PoE), metal

Extend the range of a PoE connection

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater, Model 560962, is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply, as it draws the power it needs from the PoE input.

Simple Installation

Simply connect the "PoE In" port with your PoE injector or PoE switch, and connect the "PoE Out" with the PoE device that you wish to connect; e.g., a VoIP phone or a PoE network camera. That's it. There is nothing to configure. It simply could not be any easier.

Reduce Wiring Costs

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Power over Ethernet 802.3at Compliant

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol and is designed to forward data at Gigabit speeds and up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.).

Cascading Power

You can daisy-chain multiple of the PoE extenders to increase the transmission distance even further. For each PoE extender added, you lose about 4 watts of usable PD power, but if you start with a PoE injector that outputs 30 watts of IEEE 802.3at power — for example, the Intellinet Network Solutions PoE injector (Model 560566) — then you still have 8.6 watts for your PoE device, 5 PoE extenders down the line and 600 meters (1968 ft.) away.

Enable-IT Gigabit PoE Extender Kit - Firefold

The Enable-IT 865XS PRO Gigabit PoE Extender kit is an ideal solution to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where you are limited to by false thinking LAN distance restrictions. It can operate up to 3,000ft / 915m from you power and data source and supports any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment. This eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing an affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

Using the provided High Powered 60W 56V Injector, a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input will deliver PoE power sufficient enough to deploy multiple 12V ~ 24V / 6W ~ 30W PoE devices anywhere you need to.

Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our 865XS PRO Gigabit PoE Extender or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 4,000 ft away.

We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865XS PRO Gigabit PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 865XS PRO Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

Quad port Gigabit PoE LAN switch built into the remote 4-port end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Intellinet Outdoor Vandalproof Gigabit PoE++ Injector

One 60 W Port, IEEE 802.3bt (4PPoE) Compliant, IP67 Waterproof, IK10 Vandalproof, Metal Housing

Outdoor Gigabit PoE++ Injector - 60 W for an IEEE 802.3bt Powered Device

The Intellinet Network Solutions Outdoor Vandalproof Gigabit PoE++ Injector lets you connect your IEEE 802.3bt/af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This 4PPoE injector has an output power rating up to 60 watts, which is enough for even very power-hungry PoE++ devices like motorized PTZ cameras, thin clients, point-of-sale systems, lighting controllers and digital signage applications.

Hardened design for outdoor and industrial use

This PoE++ injector is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating, vast operating temperature range of -40 – 75°C (-4 – 140°F) and vandal-proof IK10 score make this Power over Ethernet injector able to withstand harsh conditions and industrial environments. Beyond that, it has rating for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6).

Reduced wiring costs

There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the injector through its two-pin terminal block, simply connect this Ultra PoE Injector to the LAN switch port, and use the existing Cat5/6/6a cabling to deliver power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.).

Safe protection for your expensive network equipment

The auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.

Wall-mount option

For full installation flexibility indoors or outdoors, you can mount the injector on the wall through its four built-in holes. The required mounting kit comes included in the package.

Intellinet 2-Port Outdoor Vandalproof Gigabit PoE++ Extender

Two 30 W Ports, Extends PoE up to 100 m (328 ft.), 60 W Power Budget, IEEE 802.3bt (4PPoE) Compliant, IP67 Waterproof, IK10-rated, Metal Housing

This PoE++ Extender doubles the range of two Gigabit Power over Ethernet connections — even in harsh outdoor conditions

The Intellinet Network Solutions 2-Port Outdoor Vandalproof Gigabit Ultra PoE Extender adds up to 100 m (328 ft.) to the connection distance from a PoE source to one or two output devices via Cat5e or Cat6 cable. This PoE++ (4PPoE) extender does not need an additional power supply since it draws its power from the PoE input.

Designed for Outdoor Use

This PoE++ extender is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating, vast operating temperature range of -20 – 60°C (-4 – 140°F) and vandal-proof IK10 score make the Intellinet Network Solutions 2-Port Outdoor Vandalproof Gigabit Ultra PoE Extender able to withstand harsh conditions.

Reduced Wring Costs

This Ultra PoE Extender helps avoid the expense of running AC power lines for a wireless access point, network camera, IP phone, or other compatible device. Simply connect the PoE Extender to the LAN switch port through existing Cat5e/6/6a cables to deliver DC power as well as transfer data.

Power over Ethernet 802.3bt Compliant

This Ultra PoE Extender supports the IEEE 802.3bt protocol over four pairs (4PPoE), which allows for a power input of 95 W. It forwards data at Gigabit speeds and offers up to 30 watts per port to a connected IEEE 802.3at- or IEEE 802.3af-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance between PoE source and device to 200 m (656 ft.).

Simple Installation

This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its PoE In port to your PoE injector or PoE switch and to connect the PoE Out ports to the PoE devices you want to connect (e.g., a VoIP phone and a PoE network camera).

Intellinet Gigabit High-Power PoE+ Injector

1 x 30 W Port, IEEE 802.3at/af Compliant, Plastic Housing

Provide both power and data to a Powered Device (PD) using existing Cat5 cable and this PoE Injector.

The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The Power over Ethernet Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.

Reduce Wiring Costs.

There's no need to run AC power lines to get your PD set up and ready to do what it's supposed to. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Protect Your Equipment.

Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages.

Intellinet Gigabit PoE++ Injector

One 95 W Port, IEEE 802.3bt (4PPoE) Compliant, Plastic Housing, Wall-mount Option

Inject 95 Watts of Power Into Your Internet of Things (IoT) or PoE++ Network!

IEEE 802.3bt Compliant

The Intellinet Network Solutions Gigabit PoE++ Injector provides up to 95 W using all four pairs of twisted-pair network cabling to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Point-of-sale card readers & printers need up to 60 watts. Lighting fixtures and controllers require 40 to 50 watts. Some motorized IP cameras need more than 70 watts. The IEEE 802.3bt standard is an excellent solution for bringing power to these critical systems. As many new IEEE 802.3bt powered devices enter the market, you'll be ready for them with an Intellinet Network Solutions Gigabit Ultra PoE Injector.

Full Compatibility with Existing IEEE 802.3af/at Power over Ethernet devices

The Intellinet Network Solutions Gigabit PoE++ Injector helps you connect your IEEE 802.3bt/af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3bt/af/at-powered device (PD) to a switch.

Reduced Wiring Costs

It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE++ Injector to the LAN switch port, and use the existing network cabling to deliver DC power as well as transfer data.

Protected Equipment

Once DC power is connected to your networked equipment through the network cabling, this Intellinet Network Solutions PoE++ Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages.

Intellinet 2-Port Gigabit High-Power PoE+ Extender Repeater

IEEE 802.3at/af Compliant Range Extender, 100 m (328 ft.) Additional Range, 2 PSE Ports, Metal

Extend the range of a PoE connection

The Intellinet Network Solutions 2-Port Gigabit High-Power PoE+ Extender Repeater extends connection distances from a PoE source to two output devices up to 100 m (328 ft.) via Cat5e or Cat6 cable. The PoE+ extender does not need any additional power supply, as it draws the power it needs from the PoE input.

Reduce Wiring Costs

Avoid the expense of running AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5e/6/6a cabling to deliver DC power as well as transfer data.

Power over Ethernet 802.3at Compliant

The Intellinet Network Solutions 2-Port Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol. The repeater forwards data at Gigabit speeds and offers up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance between PoE source and device to 200 m (656 ft.).

Simple Installation

Simply connect the "PoE In" port with your PoE injector or PoE switch, and connect the "PoE Out" ports with the PoE devices that you wish to connect (e.g., a VoIP phone and a PoE network camera). That's it. This product was designed to be as easy as possible to set up and use.

Intellinet Outdoor Gigabit High-Power PoE+ Extender Repeater

IEEE 802.3at/af Power over Ethernet (PoE+/PoE), Extends Range up to 100 m (328 ft.), Metal, IP65

Extend the range of a PoE connection — even in harsh outdoor conditions.

The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater (561211) is designed to extend connection distances from a PoE source to an output device up to 100 m (328 ft.) via Cat5e or Cat6 cable. Cover even longer distances by cascading up to five extenders. The PoE+ Extender Repeater does not need an additional power supply, as it draws the power it needs from the PoE input.

Designed for Outdoor Use

With an IP65 rating and a vast operating temperature range of -40 – 75°C (-40 – 167°F), the Intellinet Network Solutions Outdoor Gigabit High-Power Power over Ethernet Extender Repeater can be deployed in harsh conditions, which sets it apart from its indoor counterpart, the Intellinet Network Solutions PoE+ Extender (560962).

Simple Installation

Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect (e.g., a VoIP phone or a PoE network camera). That's it. There is nothing to configure. It simply could not be any easier.

Reduced Wiring Costs

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Power over Ethernet 802.3at Compliant

The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol. It is designed to forward data at Gigabit speeds and provide up to 25 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.).

Cascading Power

Daisy-chaining multiple PoE extenders increase the transmission distance even farther. Be advised that each added PoE extender draws up to 4 W of usable PD power, and additional power losses will occur as the cable length increases.

Intellinet Power over Ethernet (PoE+) Splitter

IEEE802.3at, 5, 7.5, 9 or 12 V DC output voltage

Deliver Power over Ethernet to remote devices

The Intellinet Network Solutions PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available.

Simplify Installation for an Ethernet-based Device

Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.

802.3af Compliant Power over Ethernet

The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches.

Adjustable Power Output

During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side.

** Maximum distance per 802.3u specifications.

Intellinet Industrial Gigabit PoE++ Injector

One 84 W Port, IEEE 802.3bt (4PPoE) Compliant, IP30-Rated Metal Housing, DIN-Rail Mount

Hardened Industrial Ethernet Gigabit PoE++ Injector - 85 W for an IEEE 802.3bt Powered Device

The Intellinet Network Solutions Industrial Gigabit PoE++ Injector lets you connect your IEEE 802.3bt/af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This 4PPoE injector has an output power rating up to 85 watts, which is enough for even very power-hungry PoE++ devices like motorized PTZ cameras, thin clients, point-of-sale systems, lighting controllers and digital signage applications.

Designed for harsh industry environments

This Power over Ethernet injector was designed to give you the network connections you need in places that are less than calm or temperate. With its rugged, IP30-rated metal housing, it operates reliably and quietly, even under extreme temperatures that range from -40 to 167°F (-40 to 75?). In combination with its DIN-rail mounting option and a safe DC power input with plenty of safety features, this injector is ideal for IoT applications in Industry 4.0 and more.

Reduced wiring costs

There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the injector through its three-pin terminal block, simply connect this Ultra PoE Injector to the LAN switch port, and use your existing Cat5/6/6a cabling to deliver power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.).

Safe protection for your expensive network equipment

The auto-sensing technology of this PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.

Tenda Gigabit High PoE Injector POE30G-AT

The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of wtih 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion, but also simplifies the deployment of power lines.

PoE Performance

PoE ports supports IEEE802.3at and IEEE802.3af standard Supports AT high power(30W)

Power supply distance extension

The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power.

Gigabit blazing-fast delivery

10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire speed forwarding and MDI/MDIX, plug and play.

Stable performance

Adopts new chips solution, brings new performance experience, powerful data transfer and power

Platinum Tools PoE+ 10Gig RJ45 Shielded Field Plug - 2/Clamshell

The PoE+ 10Gig Shielded RJ45 Field Plug optimizes data throughput to PoE+ powered devices. Compatible with a wide assortment of large cables with large conductors. The cast-metal shell provides end-to end shielding from extraneous noise interference in high bandwidth applications.

Enable-IT Gigabit PoE Lightning Surge Protector Kit

The Enable-IT™ 265LP Gigabit PoE Lightning Protection Kit is a set of compact weather resistant units that provides cost-effective solution for protecting PoE and Ethernet devices from damaging electrostatic discharge and surges.

The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing Surge Protection for Ethernet data pairs as well as the PoE DC power feed.

The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are /- 15 volts on pins, 1, 2, 3 and 6 and /- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.

For maximum Surge Protection for Ethernet and PoE installs, this kit provides two 265LP units – one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT™ 265LP Gigabit Ethernet Lightning Protector Kit is compatible with 10/100/1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).

These units will save your expensive LAN or PoE IP Equipment at both ends and they do their job by taking the brunt of a lightning strike damage. They are not repairable once they perform this task and will need to be replaced. If you live in a lightning prone area it is advisable to have a spare set for each outdoor line your trying to protect so that you maintain the safety of your expensive LAN and PoE Equipment.

Enable-IT 24V Outdoor Gigabit Inline PoE Reducer

The EnableIT™ 324 Gigabit PoE Reducer 24V DC Inline Solution is a specialized converter that transforms any high power DC voltage signal down to a 24V DC or optional 12V PoE signal with Gigabit Ethernet LAN data.

This PoE Reducer is essential for installing sensitive low voltage PoE devices like PoE IP cameras, IP Phones or PoE WiFi Access points. Compatible with all 802.3af, 802.3at or PoE switches or standalone injectors including reverse polarity.

This Gigabit Power over Ethernet (PoE) Reducer is a unique one of a kind and world’s first solution that is able to take your hot PoE and PoE Plus power/data at extreme distance and safely deliver 24VDC or 12VDC PoE input for your expensive PoE Equipment.

The overvoltage issue is typically created by PoE injectors and PoE Midspan devices that leverage PoE Extenders over extreme distances and are too strong in delivered output PoE voltage to be inserted into limited 12v/24V PoE devices such as Ubiquity Wireless Access Point radios. These RJ-45 PoE radios were designed for standard Ethernet distance limitation in mind and cannot handle voltage over 20VDC. The Enable-IT 324 now solves that issue with a plug and go Gigabit PoE Reducer so that you can safely leverage PoE Extender kits that support PoE and PoE like the Enable-IT 821P, 828 or 865 PRO PoE Extender Kits.

This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure. The 324 Gigabit PoE Reducer uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment a snap, plug and go simplicity or on your existing or new wiring.

The Enable-IT 324 unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3af and 802.3at compliant device, the Enable-IT 324 – 24VDC Power over Ethernet Reducer uses 4 wires in a category rated wiring bundle, i.e. CAT5e run. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring.

Enable-IT 2-Port Waterproof Gigabit PoE Extension

The Enable-IT™ 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extension Solution is ideal for installing extended range PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, PoE security locks and much more.

At time of ordering the 828WP can be configured to disable PoE output on either or both output ports to enable non PoE LAN devices. Default configuration is PoE output enabled on both ports. These are the world’s 1st and only Waterproof copper Gigabit PoE solution in the industry – from the Inventors of PoE Extender.This weatherproof solution comes with a high powered Enable-IT 360 56V 60W Gigabit PoE Injector. that powers the 828WP Gigabit PoE Extender and your PoE devices with 2-pair and 4-pair PoE power. The single PoE injector can even power up the 828WP and 3 other 828W units and your PoE device up to 2,000ft (600m) all from one 120 ~ 260V AC outlet – Nothing is more cost effective or simple to install.

The three LAN port design allows for deployment of two separate PoE devices. By default both output ports supply PoE power, however the unit can be configured at time of ordering for disabling PoE output on either or both output ports.

The Enable-IT 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extender is a very cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. For Gigabit throughput make sure to leverage your existing or new CAT5e or better rated cabling Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.

You can also daisy chain (4) 828W Outdoor IP68 Rated units to reach 2,000ft (600m) to power a PoE devices easily.

Enable-IT Coax PoE Extender Kit 1-Port

The Enable-IT 821CP Coax PoE (Power over Ethernet) Extender is the fastest encrypted and Secure PoE Extender on the planet bar none!

Designed & Made in the USA with quality and prideful Craftsmanship!
These American-made Enable-IT 821CP Coax PoE Extenders use industry coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy. Ethernet Extension Experts designs and manufactures the 821CP COAX POE EXTENDER kit, along with its entire Ethernet Extender product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own US West coast facilities.

This is trusted Business Reliable Professional Grade PoE Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

You can leverage existing Telephone wire all the way up to Category rated CAT 7 twisted pair to deploy your extended LAN network vs expensive fiber that is unable to deliver PoE Power and is susceptible to extreme cold and movement damage.

Leverage existing or new wiring that is contiguous all the way up to 2,302 (702m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Ethernet LAN Extender coupled with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

Quest Cat6A Shielded 180 Degree Tooless Keystone Jack

Quest offers a Cat6A Shielded Power Over Ethernet keystone jack with high-speed data transfers over 10Gbps . Our 180 degree 110 IDC jacks are tooless and are easty to terminate. Fits in high-density keystone patch panels, surface mount boxes and face plates.

Quest Cat6A Utp 180 Degree Tooless Keystone Jacks

Quest offers a Cat6A Power Over Ethernet keystone jack with high-speed data transfers over 10Gbps . Our 180 degree 110 IDC jacks are tooless and are easty to terminate. Fits in high-density keystone patch panels, surface mount boxes and face plates.

TP-Link 8-Port Gigabit Desktop/Rackmount Switch

Passive PoE Adapter

Powers TP-Link products that support 48V passive PoE, TL-POE4824G

Power Your Devices

Use the passive PoE adapter TL-POE4824G to simultaneously supply power and transmit data to a passive PoE device.

Convenient Wall-Mounting Design

TL-POE4824G offers a convenient wall-mounting brackets to be easily installed on a wall.

Compatible Devices

TL-POE4824G is recommended to offer power supply to TP-Link’s passive PoE products which as follows.

• EAP245 V3.0

TP-Link 8-Port Gigabit Desktop Switch with 4-Port PoE

PoE Switches for Your Ultra Convenience

8-Port Gigabit Desktop Switch with 4-Port PoE

Power over Ethernet

4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).

Intelligent Power Management

When total power consumption excels 55W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.

Sturdy Metal Casing

Sturdy, compact metal casing and shielded RJ45 ports, with desktop, to meet your needs in any environment. Besides, fanless design ensures quiet operation

Intellinet Industrial Gigabit PoE++ Extender

One 80 W Port, Extends PoE up to 100 m (328 ft.), IEEE 802.3bt (4PPoE) Compliant, IP30-rated Metal Housing, DIN-rail Mount

PoE++ Extender - double the range of your Gigabit Power over Ethernet connection, even in harsh industrial conditions

The Intellinet Network Solutions Industrial Gigabit PoE++ Extender adds up to 100 m (328 ft.) to the connection distance from a PoE source to one output device via Cat5e or Cat6 cable. This PoE++ (4PPoE) extender does not need an additional power supply since it draws its power from the PoE input.

Designed for harsh industry environments

This Power over Ethernet extender was designed to give you the network connections you need in places that are less than calm or temperate. With its rugged, IP30-rated metal housing, it operates reliably and quietly, even under extreme temperatures that range from -40 to 75°C (-40 to 167°F). In combination with its DIN-rail mounting option, it is ideal for IoT applications in Industry 4.0 and more.

Reduced Wiring Costs

This PoE++ Extender helps avoid the expense of running AC power lines for a wireless access point, network camera, IP phone, or other compatible device. Simply connect the PoE Extender to the LAN switch port through existing Cat5e/6/6a cables to deliver power as well as transfer data.

Power over Ethernet 802.3bt Compliant

The 4PPoE Extender supports the IEEE 802.3bt protocol over four pairs (4PPoE), which allows for a power input of 90 W. It forwards data at Gigabit speeds and offers up to 80 watts to a connected, IEEE 802.3bt-, IEEE 802.3at- or IEEE 802.3af-compliant device. The cable length on both ends can be up to 100 m (328 ft.), bringing the total distance between PoE source and device to 200 m (656 ft.).

Simple Installation

This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its PoE In port to your PoE injector or PoE switch and to connect the PoE Out ports to the PoE devices you want to connect (e.g., a VoIP phone and a PoE network camera).

Intellinet Outdoor Vandalproof Gigabit High-Power PoE+ Injector

One 30 W Port, IEEE 802.3at/af Compliant, IP67 Waterproof, IK10 Vandal-proof, Metal Housing

Outdoor Gigabit PoE+ Injector - 30 W for an IEEE 802.3at Powered Device

The Intellinet Network Solutions Outdoor Vandalproof Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This injector has an output power rating up to 30 watts, which is enough for many power-hungry PoE devices.

Hardened design for outdoor and industrial use

This PoE+ injector is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating, vast operating temperature range of -40 - 75°C (-4 - 140°F) and vandal-proof IK10 score make this Power over Ethernet injector able to withstand harsh conditions and industrial environments. Beyond that, it has ratings for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6).

Reduced wiring costs

There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the Injector through its two-pin terminal block, simply connect this PoE+ Injector to the LAN switch port, and use the existing Cat5/6/6a cabling to deliver DC power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.) away.

Safe protection for your expensive network equipment

The auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.

Wall-mount option

For full installation flexibility indoors or outdoors, you can mount the injector on the wall through its four built-in holes. The required mounting kit comes included in the package.

Intellinet 4-Port Gigabit Ultra PoE Extender

Adds up to 100 m (328 ft.) to PoE Range, 90 W PoE Power Budget, Four PSE Ports with up to 30 W Output, IEEE 802.3bt (PoE++ / 4PPoE) Compliant, Metal Housing

Gigabit PoE Extender — for doubling the range of a Gigabit Power over Ethernet connection

The Intellinet Network Solutions 4-Port Gigabit Ultra PoE Extender adds up to 100 m (328 ft.) to the connection distance from a PoE source to four output devices via Cat5e or Cat6 cable. This PoE++ extender does not need an additional power supply since it draws its power from the PoE input.

Reduced Wiring Costs

This Ultra PoE Extender helps avoid the expense of running AC power lines for a wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port through existing Cat5e/6/6a cables to deliver DC power as well as transfer data.

Power over Ethernet 802.3bt Compliant

The Intellinet Network Solutions 4-Port Gigabit Ultra PoE Extender supports the IEEE 802.3bt protocol over four pairs (4PPoE), which allows for a power input of 90 W. It forwards data at Gigabit speeds and offers up to 30 watts per port to a connected IEEE 802.3at- or IEEE 802.3af-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance between PoE source and device to 200 m (656 ft.).

Simple Installation

This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its "PoE In" port to your PoE injector or PoE switch and to connect the "PoE Out" ports to the PoE devices you want to connect (e.g., a VoIP phone and a PoE network camera).

Intellinet 2-Port Gigabit Ultra PoE Extender

Adds up to 100 m (328 ft.) to PoE Range, PoE++ Power Budget 60 W, Two PSE Ports with 30 W Output Each, IEEE 802.3bt (4PPoE) Compliant, Metal Housing

Gigabit PoE Extender — for doubling the range of a Gigabit Power over Ethernet connection

The Intellinet Network Solutions 2-Port Gigabit Ultra PoE Extender adds up to 100 m (328 ft.) to the connection distance from a PoE source to two output devices via Cat5e or Cat6 cable. This PoE++ extender does not need an additional power supply since it draws its power from the PoE input.

Reduced Wiring Costs

This Ultra PoE Extender helps avoid the expense of running AC power lines for a wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port through existing Cat5e/6/6a cables to deliver DC power as well as transfer data.

Power over Ethernet 802.3bt Compliant

The Intellinet Network Solutions 2-Port Gigabit Ultra PoE Extender supports the IEEE 802.3bt protocol over four pairs (4PPoE), which allows for a power input of 60 W. It forwards data at Gigabit speeds and offers up to 30 watts per port to a connected IEEE 802.3at- or IEEE 802.3af-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance between PoE source and device to 200 m (656 ft.).

Simple Installation

This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its "PoE In" port to your PoE injector or PoE switch and to connect the "PoE Out" ports to the PoE devices you want to connect (e.g., a VoIP phone and a PoE network camera).

Intellinet Industrial Gigabit Ultra PoE Injector

1 x 60 W Port, IEEE 802.3bt/at/af Power over Ethernet (Ultra POE/PoE+/PoE), Metal Housing

Get power and data over your existing LAN cable.

The Intellinet Network Solutions Industrial Gigabit High-Power PoE+ Injector connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The PoE Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 60 watts, enough even for power-hungry PoE devices.

Reduce Wiring Costs

This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing LAN cabling to deliver DC power as well as transfer data.

Intellinet Industrial Gigabit High-Power PoE+ Injector

1 x 30 W Port, IEEE 802.3at/af Power over Ethernet (PoE+/PoE), Metal Housing

Get power and data over your existing LAN cable.

The Intellinet Network Solutions Industrial Gigabit High-Power PoE+ Injector connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.

Reduce Wiring Costs

This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing LAN cabling to deliver DC power as well as transfer data.

Intellinet Gigabit Ultra PoE Injector

One 60 W Port, IEEE 802.3at/af Compliant, Plastic Housing

60 Watts of Power for the Internet of things (IoT)!

The Intellinet Network Solutions Gigabit High-Power PoE Injector provides up to 60 W using all four pairs of twisted-pair Cat5 or Cat6 cabling to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Point-of-sale card readers & printers need up to 60 watts. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts. Ultra PoE standard is an excellent solution for bringing power to these important, critical systems. As many new powered devices enter the market, you'll be ready for them with an Intellinet Network Solutions Gigabit High-Power PoE Injector.

Full Compatibility with Existing IEEE 802.3af/at PoE Powered Devices

The Intellinet Network Solutions Gigabit High-Power PoE Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch.

Reduced Wiring Costs

It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Protect Your Equipment

Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages.

Wall-mount option

For full installation flexibility, you can mount the injector on the wall through four built-in fixing points on the back panel.

Intellinet Power over Ethernet (PoE) Injector

1 Port, 48 V DC, IEEE 802.3af Compliant

Reduce costs by using existing Cat5 cable to provide both power and data

The Power over Ethernet Injector from Intellinet Network Solutions allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

Reduce Wiring Costs

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Preserve Existing Investments

Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard.

Protect Your Equipment

Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).

Intellinet Ultra Long Range Fast Ethernet PoE+ Extender Kit

Extends PoE up to 1000 m (3280 ft.), One PD Port up to 95 W, IEEE 802.3bt (4PPoE) Compatible, IP67 Waterproof and Dustproof, Set of Two Modules, Plastic, Gray

Ultra Long Distance Power over Ethernet Extension / Repeater / Amplifier for a PoE range up to 1,000 m (3,280 ft.) - even in harsh outdoor conditions

The Intellinet Network Solutions Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit adds up to 1,000 m (3,280 ft.) to the connection distance from a PoE source to an output device via Cat5e or Cat6 cable. It has an output power rating up to 30 watts, which is enough for many power-hungry PoE devices. Its high range and weatherproof housing is especially useful for outdoor IP surveillance camera deployments. This PoE repeater delivers up to 30 W at 100 Mbps over 300 m (984 ft.) or up to 15.4 W at 10 Mbps over 800 m (2625 ft.).

Designed for Outdoor Use

This PoE+ extender offers the right power and data connector for longer-distance applications and suits a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating and a wide operating temperature range of -10 - 55°C (14 - 131°F) make it able to withstand harsh outdoor conditions.

Power over Ethernet 802.3bt-compliant Input, 802.3at/af-compliant Output

Supporting the IEEE 802.3bt protocol with input power up to 95 W, this PoE+ Extender Kit provides up to 30 watts to a connected 802.3at-compliant device or 15 W to an 802.3af-compliant device, along with data up to Fast Ethernet speeds.

Reduced Wiring Costs

This PoE+ Extender helps avoid the expense of running AC power lines to a wireless access point, network camera or IP phone. Simply connect the extender to the LAN switch port through existing Cat5e/6/6a cables to deliver DC power as well as transfer data.

Safe Protection for your Expensive Network Equipment

The auto-sensing technology of this high-power PoE extender ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages.

Simple Installation with Cascading Power

This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its PoE In port to your PoE injector or PoE switch and to connect the PoE Out port to the PoE device you want to connect (e.g., a VoIP phone or a PoE network camera). The kit includes two modules that always need to be used together for maximum distance capabilities.

Enable-IT Outdoor Coax Gigabit PoE Extender Kit 1-Port

The Enable-IT 865QW PRO Ultra PoE Extender is the world’s only available solution to Extended Ethernet and Ultra High Power PoE in a complete solution that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af/at/bt Power Over Ethernet (PoE) Standards. The 865QW PRO enables the simple installation of a high powered PoE devices like Axis Q or other high power IP Cameras, Aruba and Cisco Access points up to 1,968ft (600m) from your LAN and Power Source. This is ideal for installing any PoE IP Security cameras or PoE WiFi Access Points.

This Ultra PoE Extender drives the reach of Ultra high power PoE and Ethernet to more than (6) six times the typical Ethernet distance limit of 328ft, up to 1,968ft (600m) distance. There is no substitute for our Expertise – Only Enable-IT 865QW solution can. Made in the USA with quality and pride – the only manufacturer to do so in this industry.

To increase the durability and extended use of the product providing maximum future technology protection, 865Q PRO Ultra PoE Extender have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865QW PRO Ultra PoE Extender Solution delivers full duplex Gigabit Ethernet up to 600MB/s throughput.

This is trusted Business Reliable Professional Grade Ultra PoE Extension without the high cost of repeaters. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (Amazon Home use) gear that is banned in the US due to proven hidden spyware.

Enable-IT PoE Extender Kit 1-Port - Firefold

The Enable-IT 865Q PRO Ultra PoE Extender is the world’s only available solution to Extended Ethernet and Ultra High Power PoE in a complete solution that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af/at/bt Power Over Ethernet (PoE) Standards. The 865Q PRO enables the simple installation of a high powered PoE devices like Axis Q or other high power IP Cameras, Aruba and Cisco Access points up to 1,968ft (600m) from your LAN and Power Source. This is ideal for installing any PoE IP Security cameras or PoE WiFi Access Points.

This Ultra PoE Extender drives the reach of Ultra high power PoE and Ethernet to more than (6) six times the typical Ethernet distance limit of 328ft, up to 1,968ft (600m) distance. There is no substitute for our Expertise – Only Enable-IT 865Q solution can. Made in the USA with quality and pride – the only manufacturer to do so in this industry.

To increase the durability and extended use of the product providing maximum future technology protection, 865Q PRO Ultra PoE Extender have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865Q PRO Ultra PoE Extender Solution delivers full duplex Gigabit Ethernet up to 600MB/s throughput.

This is trusted Business Reliable Professional Grade Ultra PoE Extension without the high cost of repeaters. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (Amazon Home use) gear that is banned in the US due to proven hidden spyware.

Enable-IT Outdoor Coax Gigabit PoE Extender Kit 2-Port

The Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender is the fastest encrypted and Secure PoE Extender on the planet bar none!

Designed & Made in the USA with quality and pride. These American-made Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender uses industry Coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap.

Ethernet Extension Experts designs and manufactures the Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs . We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own US West coast facilities.

This is trusted Business Reliable Professional Grade PoE Extension without the high cost of fiber or unsecured wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865WC PRO Outdoor Coax Gigabit PoE Extender kit uses 75 Ohm coaxial wiring for best performance. The 865WC PRO Outdoor Coax Gigabit PoE Extender can support up to nine 865XC CPE units on the same coax wire, and actually can run on just 1 physical wire!

Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 3,000 ft away.

Enable-IT 2-Port Outdoor Gigabit PoE Extender Kit

The Enable-IT 865W PRO Outdoor Gigabit PoE Extender is a Gigabit wire speed throughput PoE Extender.

World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!Designed & Made in the USA with quality and pride. The American-made Enable-IT 865W PRO Outdoor Gigabit PoE Extender over copper uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865W PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs.
We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.This Enable-IT 865XW PRO Outdoor Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit Ethernet Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865W PRO Outdoor Gigabit PoE Extender kit uses 4-pair copper wiring (CAT 2 Telephone wire all the way up to CAT 7 rated). The 865W PRO Outdoor Gigabit PoE Extender can support up to 9 CPE units on the same 4-pair of wire.

Leverage any 4-pair of existing or new wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Dual port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT 1-Port Coax Gigabit PoE Extender Kit

The Enable-IT 865XC PRO Gigabit Coax PoE Extender is a Gigabit wire speed throughput Coax (Power over Ethernet) PoE Extender. World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!

Designed & Made in the USA with quality and pride. The American-made Enable-IT 865XC PRO Gigabit Coax PoE Extender over coax uses industry coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy.

We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865XC PRO Gigabit Coax PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 865XC PRO Gigabit Coax PoE Extender over coax is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865XC PRO kit uses 75 Ohm coaxial wiring for best performance. The kit can support up to 9 865XC CPE units on the same coax wire, and actually can run on just 1 physical wire!

Leverage any existing or new coaxial wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Single port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT 2-Port Gigabit PoE Extension Unit

The Enable-IT™ 828W Outdoor IP68 Rated Gigabit PoE Extension Unit is the world’s 1st and only for 4 years running copper Gigabit solution in the industry today.

This 828W Outdoor IP68 Rated product is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 828W Outdoor IP68 Rated can drive incremental Gigabit Ethernet to 800ft (240m). For installing PoE IP cameras, PoE Access Points and remote LAN segments – Nothing is more cost effective or simple to install. The three LAN port design allows for deployment of two separate PoE devices.

The Enable-IT 828W Outdoor IP68 Rated can drive industry standard Gigabit Ethernet and PoE signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE . This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.The 828W Outdoor IP68 Rated Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE cameras remotely using only a CAT5e or CAT6 rated 100m cabling. The unit can be configured at time of ordering for disabling PoE output on either or both output ports to enable standard non PoE LAN devices. By default both output ports supply PoE power. Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.

You can also daisy chain (4) 828W Outdoor IP68 Rated units to reach 2,000ft (600m) to power a PoE devices easily.

Enable-IT 2-Port PoE Extender Kit - Firefold

The Enable-IT™ 828P Gigabit PoE Extension Solution is ideal for deploying your PoE Devices like IP PoE Cameras, PoE Sensors and PoE WiFi Access Points. These are the world’s 1st and only Weatherproof copper Gigabit solution in the industry.

This Full Gigabit solution comes with a high powered Enable-IT 360 56V 60W Gigabit PoE Injector. that powers the 828P Gigabit PoE Extender and your PoE devices with 2-pair and 4-pair PoE power. The single PoE injector can even power up the 828P and 3 other 828 units and your PoE device up to 2,000ft (600m) all from one 120 ~ 260V AC outlet – Nothing is more cost effective or simple to install.

The three LAN port design allows for deployment of two separate PoE devices. By default both output ports supply PoE power, however the unit can be configured at time of ordering for disabling PoE output on either or both output ports.

The Enable-IT 828P Gigabit PoE Extender is a very cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. For Gigabit throughput make sure to leverage your existing or new CAT5e or better rated cabling

Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.

You can also daisy chain (4) 828 units to reach 2,000ft (600m) to power a PoE devices easily.

Enable-IT 1-Port Outdoor Coax PoE Extender Kit 

The Enable-IT 821CWP Outdoor Coax PoE Extender Kit is the easiest to install encrypted and Secure PoE Extender for any outdoor activities where you need a simple high speed LAN connection.

Designed & Made in the USA with quality and prideful Craftsmanship!
These American-made Enable-IT 821CWP Outdoor Coax PoE Extender use industry LAN standard RJ-45 (8-pin) and BNC Coax connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the 821W Ethernet) Extender kit, along with its entire product line, in the USA that makes us more responsive to customer demanding needs. We use the highest quality materials and craftsmanship.

This is trusted Business Reliable Professional Grade Ethernet Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

Leverage existing or new 75 Ohm coaxial wiring that is contiguous all the way up to 2,302 (702m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

The Enable-IT 821CWP Outdoor Coax PoE Extender built with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

Enable-IT 1-Port Outdoor PoE Extender - Firefold

The Enable-IT™ 821WP Outdoor PoE Extender Kit is the fastest encrypted and Secure Ethernet Extender on the planet bar none!

Designed & Made in the USA with quality and prideful Craftsmanship!
These American-made Enable-IT 821WP Outdoor PoE Extender use industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the 821WP PoE )Power over Ethernet) Extender kit, along with its entire product line, in the USA that makes us more responsive to customer demanding needs. We use the highest quality materials and craftsmanship.

This is trusted Business Reliable Professional Grade Ethernet LAN Extender without the high cost of fiber or unsecure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to discovered hidden spyware.

You can leverage existing Telephone wire all the way up to Category rated CAT 7 twisted pair to deploy your extended PoE devices vs expensive fiber that is unable to deliver PoE Power and is susceptible to extreme cold and movement damage.

Leverage existing or new wiring that is contiguous all the way up to 2,302 (702m) encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

PoE Extender coupled with industrial strength components to survive harsh temperature extremes delivers superior value and capabilities no other competitor can touch.

TP-Link 16-Port + 2-Port Gigabit Unmanaged PoE Switch

Up To 250m Data and Power Transmission for Surveillance

High PoE Power Budget

TL-SL1218MP complies with the 802.3af/at PoE+ standard, supporting up to 30W power supply on each PoE port. The total high PoE power budget of up to 192W for the 16 PoE ports, makes it ideal for small to medium business surveillance systems.

Up to 250m Transmission for Surveillance

TL-SL1218MP is a specially designed PoE switch for IP surveillance applications. PoE switch makes surveillance installation simpler, safer, and less expensive. With the extend mode, the PoE transmission distance reaches up to 250m* which makes it perfect for IP Camera deployment in large area coverage.

Video Quality Guaranteed

Priority mode guarantees the important data, such as video surveillance, is delivered with the best priority passing the data fabric even when the traffic load is heavy. Hardware switch for easy configuration with no login required.