Over $500

Jonard Tools Fiber Power Meter & Optical Light Source Kit

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing.

Jonard Tools Fiber Power Meter With Data Storage

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing. This kit includes:

• The FPM-55 Fiber Optic Power Meter for measuring wavelengths from 800-1650 nm, with a mere 0.01 dB resolution
  • Measures 6 preset calibrated wavelengths with high precision to determine absolute or relative power
  • Stores up to 1,000 data entries which can be downloaded via USB
  • Includes FC/SC adapters for APC/PC/UPC connectors and an LC adapter for PC/UPC connectors only
• The FLS-55 Fiber Optic Light Source for providing a stable light source at 850/1300 nm for multimode or 1310/1550 nm wavelengths singlemode fiber measurements
  • Has four different modulation outputs (CW, 270 Hz, 1 kHz, 2 kHz) at 1310 nm and 1550 nm wavelengths
  • Includes FC, SC, and LC adapters to directly connect to UPC/PC FC, SC, and LC fiber connectors
• A FREE BAG! The H-22 Rugged Carrying Case with Straps ($35 value)!
• Nylon Carry Case (FPM-55)
• Storage Pouch (FLS-55)
• With both the FPM-55 and FLS-55
  • Instruction Manuals
  • (3) AA Batteries each (required for operation)
  • (2) Cleaning Swabs each
  • FC Adapter, LC Adapter, and SC Adapters

Broad Range Non-Contact Voltage Tester

Klein's Broad-Range High-Voltage Non-Contact Tester detects voltage up to 230kV AC in overhead conductors. The tester indicates the presence of voltage through multiple sensitivity levels with both audible and visual signals. Attach the tester directly to a hot stick or use the universal adapter to attach it to your shotgun.

Basic Fiber Testing Kit

The SSF-TKITE-200 from Cleerline Technology Group is a versatile and user-friendly fiber testing kit designed to support efficient optical link qualification and troubleshooting for both single-mode and multimode fiber networks. This compact and comprehensive solution includes an optical power meter and two optical light sources to provide all the essential tools for accurate testing, power loss calculation, and maintenance of installed fiber.

Enclosed in a rugged carrying case and equipped with various adapters and reference cables, the SSF-TKITE-200 is ideal for field technicians and network installers seeking a reliable and portable solution.

Underground Wire Tracer and Circuit Finder

Perfect for tracing cables up to 7 ft underground, locating breaks, or tracing a circuit back to the breaker; the WCT-700 is an all in one solution for any cable tracing task.

Jonard Tools Ultimate Backpack Fiber Prep Kit

The Jonard Tools TK-199B Ultimate Backpack Fiber Prep Kit provides an array of tools needed to access and prepare a fiber optic cable for termination. It includes a rugged backpack and a variety of tools for multiple applications such as stripping, ringing, cutting, cleaning, and preparation of fiber optic cable. This tool kit is ideal for any fiber optic technician.

Jonard Tools FTTH Prep Kit With PON Power Meter

The Jonard Tools TK-185PON FTTH Prep Kit with PON Power Meter offers cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters.

Jonard Tools FTTH Prep Kit With Power Meter

The Jonard Tools TK-185  FTTH Prep Kit w/ Power Meter offers cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters.

Jonard Tools Fiber Optic Light Source Multimode & Singlemode

Designed to provide 850/1300 nm or 1310/1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for multimode or single mode fiber measurements.

Platinum Tools VDV MapMaster 3.0™ Cable Tester

The VDV MapMaster™ 3.0 combines continuity testing, mapping, generating tones, and length measurement functions into a single easy-to-use unit for installation, troubleshooting, and maintenance for telco, network, or coax cable. The back-lit display, glow-in-the-dark keypad, and a built-in flashlight help you to work in the dark. Whether your jobs are commercial or residential, the versatility and added features of the VDV MapMaster 3.0 makes it a best-value cable verifier for the professional installer! 

Platinum Tools Wireless Fiber Optic Inspection Scope

The PT-SCOPE-200 provides a solution for endface inspection and reporting to ensure fiber optic connectors are up to the correct cleanliness standards. With the 200X magnification, dirt and debris are easily identifiable and the integrated application will provide testing zones to show pass/fail results. Includes a slim carrying case for easy transport and most common connector endface adapters.

PERFECT FOR INSTALLERS
Ideal for technicians and installers working on fiber optic cable terminations.

VERSATILE AND RELIABLE
Perfect for fieldwork, datacenters, and telecom applications

Applications

• 5G fiber network installation and maintenance
  
• Data center inspections
  
• High-reliability fiber connection validation
  
• R&D and manufacturing environments

Mini OTDR/Copper Tester (1310/1550nm)

The PT-OTDR-100 mini OTDR tester provides a simple to setup and easy to use solution for OTDR testing. Includes a 5.5 inch OLED touch screen for easy viewing of cable tests and can save and export your OTDR tests. This unit will perform OTDR tests, OPM, VFL and laser source functionality for fiber optic cable, and will also perform continuity testing and TDR for Category cable

MULTI-FUNCTIONAL TESTING

Multiple tests offered for both Fiber and Copper testing

COMPACT FORM FACTOR

Ruggedized form factor with a 4-6hr battery life, or charge on the go!

ACTIVE NETWORK TESTING

LLDP, PPPoE, IP Scan, & Ping testing all-in-one.

ACCESSIBLE PRICING

Priced to supply every truck and technician.

ST-158006 – PoE PRO Data Cable and PoE Verifier

The new PoE Pro eliminates guesswork when installing, maintaining, and troubleshooting networks where PoE is deployed. Previously technicians had to understand all the various standards, device power outputs, and cable lengths to be sure a device will operate successfully. The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality, or other factors.

The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.

Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously while TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.

ST-R301HOLDERKIT – 3 x 250um, 2 x 900um fiber holders

SimplyTEST™ – Fiber Holder Kit: Precision & Speed for Splicing – 5 x 250um, 2 x 900um fiber holders

Maximize your splicing efficiency and consistency with the Fiber Holder Kit. Designed for seamless integration with your cleavers and fusion splicers, these holders ensure perfect fiber placement every time.

ST-R240VIP – FiberMASTER Video Inspection Probe

FiberMASTER Video Inspection Probe

ST-R240SIPV – FiberMASTER Single-mode OTDR

FiberMASTER Single-mode OTDR (1310/1550) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240QIP – FiberMASTER Quad OTDR

FiberMASTER Quad OTDR (850/1300/1310/1550) with SC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMLS – FiberMASTER Power Meter and Light Source

FiberMASTER Multimode/single-mode power meter and quad light source kit, with Inspection port, VFL

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240PMIV – FiberMASTER MM/SM Power Meter

FiberMASTER Multimode/single-mode power meter with interchangable SC/SC/FC connectors, Inspection port, VFL

ST-R240PIP – FiberMASTER PON OTDR

FiberMASTER PON OTDR (1310/1550/1625) with SC-APC connectors, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240MIPV – FiberMASTER Multimode OTDR

FiberMASTER Multimode OTDR (850/1300) with SC connector, Inspection port, Power meter

Test, Troubleshoot and Certify cabling faster with the FiberMASTER OTDR.

The FiberMASTER OTDR is available in 4 options, Quad, multimode, singlemode and PON.

The OTDRs feature both high dynamic range and small dead zones providing the precision required for installation and troubleshooting alike. The software simplifies certification of cabling to meet TIA/ISO/IEC/IEEE requirements with simple pass/fail results. Additionally custom test parameters are easily set to accommodate any application.

OTDRs can be complicated to configure and achieve accurate results. FiberMASTER automates testing and steps you through the process as shown below.

For FTTx/FTTH applications the PON OTDR identifies split ratios for easy testing and troubleshooting of inactive and active networks. The 1625nm wavelength allows in-service testing of networks without interrupting existing subscribers.

Why do I need a FiberMASTER?

It depends how important speed and accuracy are to you.

FiberMASTER – size, simplicity and value without compromise, made in the USA, tested in Germany.

The new FiberMASTER series of fiber optic testers will make it easier and faster to verify, troubleshoot and certify fiber optic cabling.
The OTDR, PON OTDR, Power Meter and Light Source, and Inspection Probe will enable cable installers to get the dependable test results needed, while saving thousands of dollars.
As one of the smallest OTDRs in the world you will find them easier to carry and operate while the rubberized housing will protect your investment. The simplified setup options makes them easy to use, saving you time on training and reducing the likelihood of errors.

Our New York Research and Development center of excellence has over 30 years experience designing OTDRs providing you with the most advanced, compact optical test systems available.

ST-R240LSIV – FiberMASTER Quad Light Source

FiberMASTER Quad light source with LC connectors, Inspection port, VFL

ST-LT4500S – LANTEK IV-S 500MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT4500S bundle includes a LanTEK IV-S 500MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-LT4500S – LANTEK IV-S 500MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT4500S bundle includes a LanTEK IV-S 500MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.

A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.

ST-LT4500FS – LanTEK IV-500MHz with PL/CH adapters, FiberTEK IV MM and SM, 1 Year of Sapphire Care Support

LanTEK IV-500 MHz, Permanent Link Adapters, Channel Adapters, FiberTEK IV MM LED and SM Laser Kit with LC MM 50/125μm, LC SM 9/125μm and 1 Year Sapphire Care Plan

ST-LT43000S3Y – LANTEK IV-S 3000MHZ (WITH PL/CH ADAPTERS) and 3 Years of Sapphire Care Support Bundle

The ST-LT43000S3Y bundle includes a LanTEK IV-S 3000MHz, permanent link adapters, channel adapters, and 3 year Saphire Care Plan, offering complete protection for your certifier.

The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.

A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.

ST-LT43000S – LANTEK IV-S 3000MHZ (WITH PL/CH ADAPTERS) and 1 Year of Sapphire Care Support Bundle

The ST-LT43000S bundle includes a LanTEK IV-S 3000MHz, permanent link adapters, channel adapters, and 1 year Saphire Care Plan, offering complete protection for your certifier.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-LT43000FS3Y – LanTEK IV-3000MHz with PL/CH adapters, FiberTEK IV MM and SM, 3 Years of Sapphire Care Support

LanTEK IV-3000 MHz, Permanent Link Adapters, Channel Adapters, FiberTEK IV MM LED and SM Laser Kit with LC MM 50/125μm, LC SM 9/125μm and 3 Year Sapphire Care Plan

ST-171000 – SecuriTEST IP Digital/ Analog/HD Coax CCTV Tester

SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analog CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish.

ST-163009 – LANTEK IV-S 3000MHZ (WITH PL/CH ADAPTERS)

THE MOST POWERFUL AND FASTEST CERTIFIER WE’VE EVER MADE.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-163008 – LanTEK IV-S 500Mhz (with PL/CH Adapters)

The LanTEK IV-S cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify.

A copper and fiber cable certifier, will test and save a Cat6A link in 7 seconds and certify links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements. Plus, LanTEK IV-S future-proofs your investment – it will sweep to 3000MHz providing room for future ISO/TIA test standards.

THE MOST POWERFUL AND FASTEST CERTIFIER WE’VE EVER MADE.

• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud
• Twice the CPU power as LanTEK IV

ST-157003 – SignalTEK 10G PRO with Fiber and Networking Testing

SIGNALTEK 10G BANDWIDTH TESTER

The new SignalTEK 10G measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot, and document network and data cable performance up to 10 Gigabit Ethernet standards.

SignalTEK 10G has built-in Wi-Fi connectivity to connect seamlessly to the free AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time, and “proof of performance” PDF reports for the clients.

Why do I need a 10G Ethernet Tester?

Problem:
LAN networks are at risk of expensive downtime and lost productivity due to the ever-increasing demand for bandwidth-hungry services such as video streaming, video conferencing, CCTV cameras, and Wi-Fi access points.

Solution:
SignalTEK 10G will measure the maximum bandwidth available of the network, identify bottlenecks and discover opportunities to increase bandwidth without replacing expensive data cabling.

Avoid network downtime.
Troubleshoot Ethernet connectivity issues faster using diagnostic tools.

Pinpoint bottlenecks faster.
Discover which part of your network is causing the bottleneck.

Validate network upgrades.
Verify Multi-Gigabit switch upgrades to 1/2.5/5 and 10Gb/s speeds.

ST-156006 – SignalTEK CT with Touchscreen

Now includes touchscreen. Advanced wiremapping with TDR fault location. Gigabit performance test to the IEEE802.3ab Ethernet standard. Automatic generation of PDF reports. Report upload to USB memory stick without a PC.

The SignalTEK CT issues a PDF report to prove that your installed data cables can carry Gigabit Ethernet traffic at full speed with no errors, and confirms correct wiremap results.

ST-156005 – SignalTEK NT with Touchscreen

Now includes a touchscreen. Gigabit performance testing on passive cabling and active networks. Generates PDF test reports to IEEE 802.3ab standard. Simulates VoIP/CCTV/Web/IP video network traffic. Tests connection speed, port ID, ping, traceroute, IPv4/IPv6. Supports TREND AnyWARE™ App.

If you install, maintain or troubleshoot data cabling and Ethernet networks, SignalTEK NT allows you to prove the performance up to Gigabit Ethernet transmission rates.

ST-151006 – NaviTEK NT PRO with Touchscreen

The new SimplyTEST™ NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fiber networks. Incorporating an improved graphical interface, NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free TREND AnyWare™ app.

PROSeries Milwaukee Packout w/ Foam Insert & Category Cable Termination Kit

Simply45 starter kits are bundles of essential components and tools for professionals. This kit is designed to simplify the process of terminating network cables.

The Milwaukee® PACKOUT™ Modular Storage System is the industry’s most durable and versatile storage system. The PACKOUT™ Tool Case with the Simply45® Customized Foam Insert has an impact-resistant molded base that users can connect with all other PACKOUT™ system components via integrated locking cleats. This durable tool storage box is constructed with impact-resistant polymer and a metal-reinforced locking point so it can withstand harsh job site environments. Our heavy-duty tool case is IP65 rated weather seal protects tools and accessories from rain and other jobsite debris. The Tool Case has a 75-pound weight capacity. Our PACKOUT™ Modular Storage System allows you to customize and build your own storage system to easily transport and organize your tools and accessories.

S45-PSKMP1 – Milwaukee Packout PROSeries Cat5e/6/6a Unshielded Starter Kit – 1ea./Boxed

Simply45 starter kits are bundles of essential components and tools for professionals. This kit is designed to simplify the process of terminating network cables. Our starter kits are a perfect combination of components that can be sent to every job site to ensure that users have all the necessary items to get started with Ethernet or network installations. Depending on your specific needs, you can choose a starter kit that will Cut, Strip & Terminate your category cable requirements.

The Milwaukee® PACKOUT™ Modular Storage System is the industry’s most durable and versatile storage system. The PACKOUT™ Tool Case with the Simply45® Customized Foam Insert has an impact-resistant molded base that users can connect with all other PACKOUT™ system components via integrated locking cleats. This durable tool storage box is constructed with impact-resistant polymer and a metal-reinforced locking point so it can withstand harsh job site environments. Our heavy-duty tool case is IP65 rated weather seal protects tools and accessories from rain and other jobsite debris. The Tool Case has a 75-pound weight capacity. Our PACKOUT™ Modular Storage System allows you to customize and build your own storage system to easily transport and organize your tools and accessories.

250x Fiber Optic Video Microscope w/1.25mm LC & 2.5mm SC One-Click Cleaners

The Cleerline Fiber Microscope with Video Display is an easy-to-use handheld microscope for inspecting fiber optic terminations. It includes a portable LCD video display with remote microscope probe, providing magnification up to 250x.

Unlike traditional handheld fiber microscopes, the Fiber Microscope with Video Display provides easy viewing access to hard-to-reach connectors and connections. It quickly and easily inspects installed fiber cables and ports in rack-mount enclosures, wall-mount enclosures, wall boxes and patch panels. Plus, the video display ensures the safe viewing of optical connections without risk of active invisible laser light.

The Fiber Microscope with Video Display is an essential tool for verifying fiber optic connectors and lenses on cable assemblies, patch cords and pigtails, ensuring they're clean and undamaged.

Professional Fiber Testing Kit With Data

The SSF-TKITP-500 Professional Fiber Testing Kit is a high-quality solution for fiber certification in accordance with TIA-568-C standards. This kit includes an Optical Power Meter and Light Source to test both multimode and single-mode installed fibers. Four wavelengths, with a range of 70 decibels (dB). The Light Source and Power Meter measure link loss, allowing calculation of the link loss budget.

The test kit is designed for efficiency and ease of operation. Features include storage of up to 1000 test records. Data can be exported to CSV via downloadable software (PC only).

The test kit provides SC testing by default. LC testing is available with use of the included LC adapter and reference cables in the full reference cable pack. Adapters for FC-ST terminated cables are also included. All kit items are contained in a sturdy case for easy access in the field.

The SSF-TKITP-500 provides detailed fiber certification in accordance with TIA-568-C standards.

Wireless Fiber Inspection Microscope

This portable Wi-Fi end-face probe provides clear high-resolution images of fiber optic connector ferrules in real time on a smart mobile device or tablet. It also features a One Press automatic analyze function, which automatically generates and records a Pass/Fail report.

Solar+ Clamp Meter CAT III 1500 V

Elevate your high voltage DC work with the Jonard ACM-1500DC CAT III 1500 V True-RMS Clamp Meter. This versatile device is tailor-made for professionals working in solar arrays, wind power farms, electric railways, data centers, and uninterruptible power supplies. It excels in precision, measuring up to 2500 V DC, 1500 V AC, and up to 999.9 A DC or AC through the clamp jaws. The slim jaw design ensures access to even the most congested combiner boxes, and the test leads are CAT III 1500 V DC rated for peace of mind

Advanced Optical Fiber Identifier w/ Power Meter & VFL

Designed to quickly identify the direction of light being transmitted in the fiber and display the relative core power without damaging the fiber. This fiber identifier is the perfect tool for identifying fiber in network systems without disrupting the network and includes a built-in VFL and Power Meter for convenience. This fiber identifier also features the following:

Professional Multi-Function OTDR, 1310/1550 nm

Jonard Tools’ Professional Multi-Function OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses

Jonard Tools Fiber Connector Cleaning & Inspection Kit

The Jonard Tools TK-189 Fiber Optic Connector Cleaning and Inspection Kit provides all the tools needed for cleaning and inspection of fiber connector end faces. This kit is a must have for any fiber optic technician.

Jonard Tools Fiber Connector Cleaning And Inspection Kit

The Jonard Tools TK-188 Fiber Optic Connector Cleaning and Inspection Kit provides all the tools needed for cleaning and inspection of fiber connector end faces. This kit is a must have for any fiber optic technician.

Jonard Tools Multi-Function OTDR

Jonard Tools’ Mini Pro OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses.