Your Cart

Free Shipping on Orders > $74.99 - *Some Exclusions May Apply

expand/collapse
(704) 979-7100 (0)
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack

Kendall Howard Phantom Class Open Frame Swing-Out Rack

SKU#: 1915-3-800-12

UPC#: 879447004182

30 Day Money Back Guarantee

100% Secure Shopping

warranty 10 year 1

Lifetime Warranty

SKU#: 1915-3-800-12

UPC#:879447004182
$300.00

SKU#: 1915-3-800-12

UPC#:879447004182
Rack Units:

Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.

Califonia Warning 65

California Prop 65 Warning

×
For CA Residents Only.
California Proposition 65 Warning

Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.

• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.

For further information, please visit www.P65Warnings.ca.gov

  • Description+
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack

    The Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rackmount equipment up off the floor, and it can easily support up to 150 lbs, with its 20" usable depth. The 90-degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.

    • One set of 10-32 tapped rails
    • 150 lb. weight capacity
    • 20" usable mounting depth
    • 19" EIA compliant
    • Ships knocked down
    • Made in the USA
    • Limited Lifetime Warranty
  • Features+
  • 90 Degree Swing-Out
    Pivoting rackmount frame swings out 90 degrees to easily access the rear of installed network equipment. Integrated positive stop prevents the gate from being opened more than 90 degrees to avoid causing damage or stress to cabling and connection points. A simple latching mechanism securely holds the swing gate in the closed position when finished.

    Easy to Assemble
    Knockdown design reduces shipping charges and assembles in a snap. With just a few steps the rack is easy to assemble, and with the 16″ on center mounting holes you can mount directly to your wall studs.

    Numerous Cable Lacing Points
    Both the front and rear of the wall rack feature oblong cut outs for securing cable bundles. Simply use your preferred cable ties or hook and loop straps.

    Open Back Design
    Backless design allows the rack to be installed over existing equipment such as network or electrical conduit, wall mounted equipment, and more. Perfect for upgrading a network that already is in use because you don’t have to disconnect cables and spend time re-terminating. Just feed the device through the top, back or sides and mount into place.

  • Specs+
    • Material(s): CRS (Cold Rolled Steel)
    • Color/Finish: Black Powder Coated Finish
    • One set of 10-32 tapped rails
    • 150 lb. weight capacity
    • 20" usable mounting depth
    • 19" EIA compliant
    • Width: (12U) 21.09", (18U) 21.09
    • Depth: (12U) 22.12", (18U) 22.12
    • Height: (12U) 31.24", (18U) 41.74
    • Weight: (12U)38.50lbs, (18U) 42.65lbs
  • Package Contents+
    • Main Frame (1)
    • Front Angled Brace (2)
    • Rear Angled Brace (2)
    • Swing-Out Brace (2)
    • Upper Stop Bracket w/ Latch (1)
    • Lower Stop Bracket (1)
    • Assembly Parts Pack (1)
  • Reviews+
  • Kendall Howard Phantom Class Open Frame Swing-Out Rack

    The Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rackmount equipment up off the floor, and it can easily support up to 150 lbs, with its 20" usable depth. The 90-degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.

    • One set of 10-32 tapped rails
    • 150 lb. weight capacity
    • 20" usable mounting depth
    • 19" EIA compliant
    • Ships knocked down
    • Made in the USA
    • Limited Lifetime Warranty

    90 Degree Swing-Out
    Pivoting rackmount frame swings out 90 degrees to easily access the rear of installed network equipment. Integrated positive stop prevents the gate from being opened more than 90 degrees to avoid causing damage or stress to cabling and connection points. A simple latching mechanism securely holds the swing gate in the closed position when finished.

    Easy to Assemble
    Knockdown design reduces shipping charges and assembles in a snap. With just a few steps the rack is easy to assemble, and with the 16″ on center mounting holes you can mount directly to your wall studs.

    Numerous Cable Lacing Points
    Both the front and rear of the wall rack feature oblong cut outs for securing cable bundles. Simply use your preferred cable ties or hook and loop straps.

    Open Back Design
    Backless design allows the rack to be installed over existing equipment such as network or electrical conduit, wall mounted equipment, and more. Perfect for upgrading a network that already is in use because you don’t have to disconnect cables and spend time re-terminating. Just feed the device through the top, back or sides and mount into place.

    • Material(s): CRS (Cold Rolled Steel)
    • Color/Finish: Black Powder Coated Finish
    • One set of 10-32 tapped rails
    • 150 lb. weight capacity
    • 20" usable mounting depth
    • 19" EIA compliant
    • Width: (12U) 21.09", (18U) 21.09
    • Depth: (12U) 22.12", (18U) 22.12
    • Height: (12U) 31.24", (18U) 41.74
    • Weight: (12U)38.50lbs, (18U) 42.65lbs
    • Main Frame (1)
    • Front Angled Brace (2)
    • Rear Angled Brace (2)
    • Swing-Out Brace (2)
    • Upper Stop Bracket w/ Latch (1)
    • Lower Stop Bracket (1)
    • Assembly Parts Pack (1)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
Open Google Reviews for our website ×