Networking Accessories

These Cat6/6A RJ-45 Shielded Plugs are designed for Round Solid or Stranded cable at 23 AWG and feature 50 micro-inch gold plated contacts. This 100 pack of connectors is an excellent choice for extensive Cat6 networking solutions.

Platinum Tools Shielded Cat5E & Cat6 RJ45 EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100020 is the single shielded EZ-RJ45 connector. They are fully foil-shielded with an internal ground for interference-sensitive installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a shielded Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools ezEX 48 Shielded CAT6A Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Cat6/Cat6A Shielded RJ45 Feed Through Plugs

Cat6/Cat6A Shielded RJ45 Feed-Through Plug for Solid and Stranded Cable, 100 Pack

CAT5E RJ45 Shielded Connectors, 3 Prong 100pk - FireFold

FireFold's Shielded Cat5E RJ45 Plugs are the highest caliber of quality industry wide. The plug is fully covered in metal case to protect the signal against electro-magnetic noises. Developed to work with either solid or stranded cables for ease of use. 50-microinch gold plating insures fast and reliable network connections. Designed for both voice and data connections. UL/CSA listed. This plug works with any standard RJ45 crimp tool.

Platinum Tools ezEX-RJ45 Shielded CAT6 Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Vertical Cable Cat5E RJ45 Shielded Feed Through Plug 100 Pack

The Vertical Cable 011-019/EZF-100 Cat5E RJ45 Shielded Modular Feed Through Plug features a fast and easy feed-through design. It's easy to terminate and offers easier sequence verification than with standard RJ45 plugs. Gold plated terminal contacts offer corrosion resistance and optimal signal integrity. Available in bags of 100 pieces.

Cat8 RJ45 Connectors - Less Shielded

CAT8 RJ45 connectors are designed to work specifically with Cat.8 Cable. The RJ45 contacts are gold plated, wire alignment insert provides an efficient termination without any need of tools. We do recommend to use a cable striper to expose the inner conductors. The housing of the connectors is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).

Platinum Tools ezEX™44 Shielded CAT6 Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools ezEX™48 Shielded CAT6A Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Platinum Tools Cat6A Flex Connector

Flex Connector makes network cable terminations easier than ever. The unique patented design ensures top tier performance for Cat5e/6/6A/7 cabling. These connectors provide a low cost, easy termination solution with high performance and superior connectivity options.

Platinum Tools ezEX™44 Shielded CAT6 Connector

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Choose the Right RJ45 Connectors

Leverage the power of 40G with shielded termination plugs. Your data network is only as strong as your weakest link, so if you're using CAT8 Ethernet cable, make sure you have the correct plugs for the job.

The shielded CAT8 field termination plug is designed specifically for CAT8 bulk cable. This 8 pin 8 conductor (8p8c) plug has 50 micro inch gold plated contacts for superior signal conductivity. The wire alignment insert provides an efficient termination without a crimp tool, although a cable stripper is recommended to prepare the cable for termination. This connector has been rated for PoE and is capable of power transfer.

Why Shield Your RJ45 Connectors?

This connector housing is shielded with zinc die-cast nickel plating. This makes our CAT8 plugs more durable while being less prone to corrosion and rust. All our CAT8 plugs come standard with two different sizes of boots. These boots provide better stress relief support around the connection point of the cable and connector.

The copper foil included with the RJ45 connector will also further shield from any unwanted EMI or crosstalk. So, update your system today so your company can get faster, more efficient conversion rates.

Platinum Tools RJ45 CAT6A 10Gig Shielded Connector

Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6e, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.

Connector is only compatible with Platinum Tools Tele-TitanXg™ and Tele-TitanXg™ 2.0 Crimp Tool. Please see related products.

ABA Elite Cat8 RJ45 Field Termination Plug 24 Pack

The ABA Elite Cat8 RJ45 field termination plug makes terminating category 8 cable easier than ever. Save time on your installs with these durable shielded plugs. These are fully compatible with Cat7A or Cat8 riser (CMR) and plenum (CMP) cables, making these a perfect solution if you are wanting to future-proof your network for years to come. Protect your connections from electromagnetic interference (EMI) with these plugs. The tool-less design makes for an efficient connection and punch down. Whether for your home, office, or business, you can trust on these field plugs to boost performance up to 40Gb.

The Vertical Cable 011-020G-100 Cat5E RJ45 Shielded Modular Plug w/ Ground Wire Hook provides extra protection in noisy environments. Gold plated terminal contacts offer corrosion resistance and optimal signal integrity, while shielding protects against EMI and RFI interference. Available in bags of 100 pieces.

ProSeries 10G Cat6a/7/7a Shielded External Ground – Pass-Through RJ45 with Cap45® & Bar45® 50 pc/Jar

Simply45® ProSeries hybrid connectors feature the patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. These connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

 Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions introduces the ProSeries Shielded with External Ground Pass-Through RJ45 Modular Plug, S45-1755P. The uniquely designed and patented Simply45® ProSeries S45-1755P simplifies and improves the terminated plug performance for shielded 10G LAN cables. The Simply45® ProSeries S45-1755P Pass-Through RJ45 modular plugs are by far the highest performing, easiest to use, and most cost-effective way to professionally terminate 10G Shielded and other large diameter shielded LAN cables.

The S45-1755P are IEEE 802.3 10GBase-T compliant and are recommended for shielded 10G LAN Cables Cat7a/7/6a with FPE insulated wires, and Large OD Shielded LAN cables with PE insulated wires such as Cat6 STP and Cat6a F/UTP. These plugs include some unique features that simplify the RJ45 10G termination process and improve the terminated plug performance.

Simply45® ProSeries introduces the exclusive Cap45® (PATENT: 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

ProSeries Integrated Strain Relief for all Simpy45® External Ground Shielded RJ45 – Clear – 100pcs/Bag

Simply45® strain relief boots give a finished and professional look to the cable assembly, improving cable management and reducing the chances of accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B004P is an 8.5mm (0.33”) snagless narrow-width strain relief for use with larger diameter shielded LAN cables. The S45-B004P is recommended for all Simply45® PROSeries branded shielded with external ground RJ45 modular plugs. These 8.5mm strain reliefs protect the RJ45 modular plug and extend the useful life of the termination. Simply45® recommends that strain reliefs or boots should be used with all RJ45 terminations.

10G Rated RJ45 Toolless Shielded Field Plug, Ultra Slim Design for Cat6/6a/7a Shielded LAN cables, - 1ea/Bag

10G Rated RJ45 Field Plug – Ultra Slim – Fully Shielded 1pc Design for Cat6/6a/7a Shielded LAN cables, Toolless, Re-Usable, ANSI/TIA, ISO/IEC, PoE IEEE 802.3bt

Platinum Tools PoE+ 10Gig RJ45 Shielded Field Plug - 2/Clamshell

The PoE+ 10Gig Shielded RJ45 Field Plug optimizes data throughput to PoE+ powered devices. Compatible with a wide assortment of large cables with large conductors. The cast-metal shell provides end-to end shielding from extraneous noise interference in high bandwidth applications.

SCP Simply45 Rj45 Cat5e Shielded Plug

The SIMPLY45™ Cat5e Shielded plug is a fully shielded single piece RJ45 with internal ground that allows Cat5e twisted-pair wire conductors to completely pass through the plug and out the front.

This allows you to see and verify the wire alignment order before crimping.

USA Designed, TAA Compliant

PROSeries Milwaukee Packout w/ Foam Insert & Category Cable Termination Kit

Simply45 starter kits are bundles of essential components and tools for professionals. This kit is designed to simplify the process of terminating network cables.

The Milwaukee® PACKOUT™ Modular Storage System is the industry’s most durable and versatile storage system. The PACKOUT™ Tool Case with the Simply45® Customized Foam Insert has an impact-resistant molded base that users can connect with all other PACKOUT™ system components via integrated locking cleats. This durable tool storage box is constructed with impact-resistant polymer and a metal-reinforced locking point so it can withstand harsh job site environments. Our heavy-duty tool case is IP65 rated weather seal protects tools and accessories from rain and other jobsite debris. The Tool Case has a 75-pound weight capacity. Our PACKOUT™ Modular Storage System allows you to customize and build your own storage system to easily transport and organize your tools and accessories.

Simply45 Strain Reliefs for all S45 Brand STP External Ground - 100pcs/Bag

Simply45® strain relief boots give a finished and professional look to the cable assembly, improving cable management and reducing the chances of accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B003 is an 8.5mm (0.33”) snagless strain relief for use with larger diameter shielded LAN cables. The S45-B003 is recommended for all Simply45® brand shielded with external ground RJ45 modular plugs. These 8.5mm strain reliefs protect the RJ45 modular plug and extend the useful life of the termination. Simply45® recommends that strain reliefs or boots should be used with all RJ45 terminations.

Simply45® S45-B003 – 8.5mm (0.33”) Snagless Strain Reliefs Features:

For Large Diameter LAN Cables. The Simply45® S45-B003 is designed to work with most large diameter LAN cables. It can work with cable diameters up to 8.5mm (0.33”). We recommend this strain relief/boot for all Shielded with External Ground RJ45 modular plugs. You can also use these strain reliefs with other unshielded large-diameter LAN cables such as Cat6 Shielded and Cat6 Shielded Direct Burial.

Prolongs Life of the Termination. The S45-B003 takes the strain off the terminated plug. When you do not use a strain relief, any contact with the plug or cable puts strain directly on the terminated plug. Over time this could cause one or more of the RJ45 pins to become loose. If a pin becomes loose it will create electrical resistance.  Resistance creates heat. This could then cause performance problems or damage to the device socket.

Fits Over the Terminated RJ45 Modular Plug. The S45-B003 is designed to fit over Simply45® shielded with external ground RJ45 modular plugs.

Maintains Correct Bend Radius of the Termination. The Simply45® S45-B003 Strain Reliefs protect the terminated RJ45 from damage during the life of the link or channel. Maintaining industry standards bend radius is important for maximizing the link/channel performance.

Professional Finish. In addition to protecting the termination and extending the operating life of the link/channel, the S45-B003 strain reliefs also provide a professional finish to your terminated RJ45.

Trimmable. The S45-B003 strain reliefs are trimmable so that you can adjust the bend radius if necessary, to work in very tight installations.

Clear Color. The S45-B003 strain reliefs come in a clear color so that it easily works with all cable jacket colors.

Snagless Design. The S45-B003 strain reliefs are a snagless design. This prevents broken latch tabs on the RJ45 modular plugs.

Wide Mouth Resealable Bag for Easy Hand Access. No need to spill RJ45 mod plugs out of the bag just to reach them. The S45-B003 strain reliefs bag packaging stands up and can remain open so that you can easily reach in and remove the strain reliefs.

PROSeries Pass Through Red Tint, Hi/Lo Stagger - Cat6/6a UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® ProSeries Unshielded Pass Through RJ45 Modular Plugs with Cap45® for 23AWG Solid (Cat6/6a UTP), Hi/Lo Stagger, Wire Conductors 1.05mm-1.2mm/0.041″-0,047″, Max Cable OD 7.4mm/0.0291″, UL94 V0 Commercial Rated, Red Tint- 50pc/Clamshell

Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions introduces our ProSeries Pass-Through RJ45 Modular Plug, S45-1700P for unshielded LAN cables. This exclusive patented pass-through RJ45 modular plug is a historic breakthrough in “pass-through” RJ45 reliability and performance.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

PROSeries Pass Through 1 Piece Shielded External Ground Green Tint - Cat6 STP with Bar45™ & Cap45™ - 50pc Jar

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions introduces our ProSeries Shielded with External Ground Pass-Through RJ45 Modular Plug, S45-1650P. The uniquely designed and patented Simply45® ProSeries S45-1650P simplifies and improves the terminated plug performance for shielded Cat6 and Cat6A F/UTP LAN cables. The Simply45® ProSeries S45-1650P Pass-Through RJ45 modular plugs are by far the highest performing, easiest to use, and most cost-effective way to professionally terminate Cat6 Shielded STP and Cat6A F/UTP LAN cables.

Simply45® introduces our ProSeries Pass-through RJ45 Modular Plugs with our exclusive Cap45® (PATENT: 10,811,831 B1). Cap45® quickly and easily snaps onto the front of the plug covering the exposed wire ends. No risk of electrical shorting due to improperly trimmed wire ends. Simply45® ProSeries is the right solution for commercial networking, certified systems, HDBaseT, PoE/PoH, and all professional installations.

Cap45® is a must-have for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

PROSeries Pass Through 1 Piece Shielded External Ground Green Tint - Cat6 STP with Bar45™ & Cap45™ - 25pc Clamshell

Simply45 PROSeries Shielded Pass Through 1 piece RJ45 Modular Plugs with Bar45™ & Cap45™ for 23AWG Solid (Cat6/6a STP), Hi/Lo Stagger, Wire Conductors 1.05mm-1.2mm/0.041″-0,047″, Max Cable OD 7.4mm/0.0291″, UL94 V0 Commercial Rated, Green Tint

PROSeries Pass Through Shielded - Cat5e STP (internal ground) With Cap45™- 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45 ProSeries Shielded Internal Ground Pass Through RJ45 Modular Plug with Cap45 for 24AWG Solid (Cat5e STP), 28-26AWG Stranded (Cat5e/6/6a STP), Wire Conductors 0.95 – 1.05mm/ 0.037″ – 0.041″, Max Cable OD 6.5mm/0.255″, UL94 V0 Commercial Rated, Blue Tint

Standard Cat7a/7/6a Shielded External Ground RJ45 Modular Plugs with Bar45™ Orange Tint, Hi/Lo Stagger - 50pcs/Jar

Simply45 Standard Series connectors feature our reengineered connector designed for the technology used today. Simply45 only uses the highest quality materials to ensure reliable results that greatly reduce truck roll backs. Our connectors are commercial rated and feature a 3 prong style contact designed for all PoE application making Simply45 the most reliable RJ45 termination on the market today.

Up until now, using an RJ45 modular plug to terminate shielded 10G LAN cables such as Cat7a, Cat7 and Cat6a were time-consuming, and frustrating, and if you ever put a Fluke test on longer distance links or channels, the results were not exactly stellar. Of course, you could use an industrial-style RJ45 Field Plug connector, but those are expensive and still require more effort than they should. The Simply45® engineering team did extensive testing and development to design a high-performing Standard WE/SS (8P8C) RJ45 modular plug solution that was both easy to use and cost-effective.

Introducing our S45-1155 Standard WE/SS Shielded with External Ground RJ45 Modular Plugs for 10G LAN cables with FPE insulated wires. FPE (foam polyethylene) insulated wires are found on most of today’s 10G Shielded LAN such as Cat7a, Cat7, Cat6a with S/FTP, U/FTP, and F/FTP LAN cable constructions. The S45-1155 are IEEE 802.3 10GBase-T compliant.

Note: If you are using a larger diameter shielded LAN cable with PE (solid polyethylene) we recommend using the S45-1150 Standard RJ45 modular plug or the Simply45® ProSeries Pass-Through part S45-1755P.

The uniquely designed Simply45® S45-1155 simplifies and improves the terminated plug performance for shielded 10G LAN cables. The S45-1155 shielded modular plugs are by far the highest performing, easiest to use, and most cost-effective way to professionally terminate 10G Shielded LAN cables with FPE insulated wires.

Standard Shielded (External Ground) Cat6 STP RJ45 Modular Plugs with Bar45™ Green Tint, Hi/Lo Stagger - 50pcs/Jar

Simply45 Standard Series connectors feature our reengineered connector designed for the technology used today. Simply45 only uses the highest quality materials to ensure reliable results that greatly reduce truck roll backs. Our connectors are commercial rated and feature a 3 prong style contact designed for all PoE application making Simply45 the most reliable RJ45 termination on the market today.

Simply45® is the industry-leading brand for RJ45 modular plug innovation and performance solutions. Introducing the Simply45® S45-1150 Standard WE/SS (8P8C) Shielded with External Ground RJ45 Modular Plug for PE Insulated Wire Conductors such as found on Cat6 Shielded STP and Cat6a F/UTP LAN cables.

The Simply45® S45-1150 RJ45 shielded modular plug provides better signal isolation and terminated performance than other shielded RJ45 modular plugs for larger diameter Shielded LAN cables using PE (solid polyethylene) insulated wire conductors.

Note: If you are using shielded 10G LAN cables with FPE (foamed polyethylene) insulated wire conductors we recommend using the S45-1155 Standard WE/SS RJ45 modular plug or the S45-1755P Shielded Pass-Through RJ45 modular plug for 10G LAN cables.

Standard Shielded (Internal ground) Cat5e STP RJ45 Modular Plugs, Blue Tint - 50pcs Clamshell

Simply45 Standard Series connectors feature our reengineered connector designed for the technology used today. Simply45 only uses the highest quality materials to ensure reliable results that greatly reduce truck roll backs. Our connectors are commercial rated and feature a 3 prong style contact designed for all PoE application making Simply45 the most reliable RJ45 termination on the market today.

Shielded RJ45 Connector with Crimp Tail for CAT6A Cable, Pack of 100

The Jonard Tools CAT6A RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6e, CAT6A, and CAT7A network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector.

Modular Plug, 8P8C, CAT6A, STP, Ruggedized, Field-Terminatable, 90-Deg Variable Direction - 10 Pack

Modular Plug, 8P8C, CAT6A, STP, Ruggedized, Field-Terminatable, Slim-Profile - 10 Pack

Modular Plug, 8P8C, CAT6A, STP, Ruggedized, Field-Terminatable - 10 Pack

Platinum Tools Shielded EZ-RJ45 Connectors

Platinum Tools EZ-RJ45 connectors are known for simplifying twisted pair terminations. The unique patented design allows you to insert the wires through the connector and out of the front, enabling easy wiring sequence verification. These 100023C connectors are intended specifically for applications requiring shielded cable and connectors.

These connectors are built on the Cat6 framework, so they are compatible with both Cat5E and Cat6 cable. This external ground design can accommodate wires up to 0.280 inch in diameter.

Cat6a Field Terminable Plugs

With demand for high bandwidth IP enabled devices growing, such as those used in network video surveillance, IP surveillance cameras, and data centers that require custom length transmissions up to 10Gbps, our Cat6a field terminable plugs provide an efficient and simple solution to terminate Cat6a cables.

Our field terminable plugs are fully shielded and come with a 25 year warranty when used as an end-to-end copper cabling install. The modular plug supports wire gauges from 23-26AWG and is TAA compliant to meet the U.S. Government's Trade Agreements Act (TAA).

Hassle Free Termination

Installation is easy. Insert the Cat6a cable into the boot. Use the copper foil tape and wrap it around the ground wire if necessary. Insert the wires into the wire manager and then into the plug housing to terminate. When used in conjunction with our field terminable crimping tool, the result is a secure and terminated connection that complies with ANSI/TIA-568-C.2 standards.

Metal Housing

Metal housing for durability. Different colors available for color coding during field installation.

23-26AWG, 6.0 to 7.5mm OD

Supports wire gauges from 23-26AWG with an outer diameter from 6.0 - 7.5mm.

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Flex Connector makes network cable terminations easier than ever. The unique patented design ensures top tier performance for Cat5e/6/6A/7 cabling. These connectors provide a low cost, easy termination solution with high performance and superior connectivity options.

10G Rated RJ45 Toolless Shielded Field Plug for larger cables- 22-24AWG, 9mm OD- Shielded 1pc for Cat6/6a/7a - 1ea/Bag

10G Rated RJ45 Field Plug for larger cables- 22-24AWG, 9mm OD – Ultra Slim – Fully Shielded 1pc Design for Cat6/6a/7a Shielded LAN cables, Toolless, Re-Usable, ANSI/TIA, ISO/IEC, PoE IEEE 802.3bt

PlatinumTools EZ-RJ45® Shielded CAT5e/6 Connector

The Original EZ-RJ45® shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable & shielded connectors.

WARNING: Platinum’s EZ-RJ45 connectors and crimp tools are designed to work as a system. Platinum Tools’ products are NOT intended to be compatible with other brands and such unintended use can result in bad connections, breakage, and human safety hazards, and will also void the warranty. Platinum is not responsible for any unintended uses of its products.