Networking Accessories

CAT6 RJ45 Connector 23AWG Solid/Stranded Round Cable 100pk

These Cat6 RJ-45 Modular Plugs are designed for Round Solid or Stranded cable at 23 AWG and feature 50 micro-inch gold plated contacts. This 100 pack of connectors is an excellent choice for an extensive Cat6 networking solution.

The Vertical Cable 012-023/EZF-100 Cat6 RJ45 Modular Feed Through Plug features a fast and easy feed-through design. It's easy to terminate and offers easier sequence verification than with standard RJ45 plugs. Gold plated terminal contacts offer corrosion resistance and optimal signal integrity. Available in bags of 100 pieces.

RJ11 Plug for Stranded Flat Wire

This is an RJ11 Plug for Stranded Flat Wire. These are designed for voice applications and most commonly used to terminate telephone lines. This connector contains gold-plated contacts and uses the 6 Position 4 Conductor wiring standard.

Platinum Tools Cat5E EZ-RJ45 Connector

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100003C is a pack of Cat5E EZ-RJ45 connectors for Cat5E installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat5E Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Platinum Tools Cat6 RJ45 EZ-RJ45 Connector 50pk

As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.

Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100010C is a 50-pack of Cat6 EZ-RJ45 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.

The Difference

The initial steps for adding an EZRJ45 connector onto a Cat6 Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.

Vertical Cable 011-018/EZF-100 Cat5E Feed 100 Pack

The Vertical Cable 011-018/EZF-100 Cat5E RJ45 Modular Feed Through Plug features a fast and easy feed-through design. It's easy to terminate and offers easier sequence verification than with standard RJ45 plugs. Gold plated terminal contacts offer corrosion resistance and optimal signal integrity. Available in bags of 100 pieces.

CAT5E RJ45 Shielded Connectors, 3 Prong 100pk - FireFold

FireFold's Shielded Cat5E RJ45 Plugs are the highest caliber of quality industry wide. The plug is fully covered in metal case to protect the signal against electro-magnetic noises. Developed to work with either solid or stranded cables for ease of use. 50-microinch gold plating insures fast and reliable network connections. Designed for both voice and data connections. UL/CSA listed. This plug works with any standard RJ45 crimp tool.

Vertical Cable Cat5E RJ45 Shielded Feed Through Plug 100 Pack

The Vertical Cable 011-019/EZF-100 Cat5E RJ45 Shielded Modular Feed Through Plug features a fast and easy feed-through design. It's easy to terminate and offers easier sequence verification than with standard RJ45 plugs. Gold plated terminal contacts offer corrosion resistance and optimal signal integrity. Available in bags of 100 pieces.

Vertical Cable Cat6A Feed Through Plug Unshielded

Platinum Tools ezEX™44 - ezEX-RJ45® CAT6 Connector

This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows ‘big’ conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

This ezEX™48 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

Simply45 Snagless Boot/Strain Relief Cat6 Plugs

SIMPLY45-BOOT-CAT6

SIMPLY45 SNAGLESS BOOT/STRAIN RELIEF FOR SIMPLY45-CAT6 PLUGS- CLEAR COLOR- 100 PIECES PER BAG

Snagless Boot/Strain Relief for SIMPLY45-CAT6 plugs.

These boots lock into the connector allowing both the connector and boot to be crimped in one easy step.

CAT6 RJ45 Pass-Through Connectors (Pack of 50)

The Jonard Tools CAT6 RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6 network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector.

Intended for use with Jonard's RJ11 and RJ45 connector crimping tool: UC-4569

The Vertical Cable 011-020G-100 Cat5E RJ45 Shielded Modular Plug w/ Ground Wire Hook provides extra protection in noisy environments. Gold plated terminal contacts offer corrosion resistance and optimal signal integrity, while shielding protects against EMI and RFI interference. Available in bags of 100 pieces.

Quest Cat5e RJ-45 Round Solid Modular Plugs

Quest RJ-45 Round Solid Mod Plug, 50 mic Gold, 8C - 100 pk

LC/UPC Multimode OM3-4 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ LC multimode OM3/4 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your multimode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ LC multimode OM3/4 Connectors are compatible with all SSF™ fibers as well as standard 50/125 multimode fibers.

j5create JCH471 USB Type-C to Gigabit Ethernet & HUB

The JCH471 USB Type-C Gigabit Ethernet & HUB Multi Adapter provides extra connectivity for your computer with 5 Gbps transfer speed. Our pocket-sized multi-adapters allow you to add additional USB computer accessories and Gigabit LAN through your USB Type-C port.

This Gigabit Ethernet adapter allows you to add networking capabilities to a computer that does not have a Wi-Fi connection. It has an RJ-45 connector that supports 10/100/1000 Mbps Ethernet performance, and it is perfect for MacBook Air, Chromebook, and other laptop and desktop computers with a USB-C port.

Fast and portable, this unique adapter gives you Ethernet and USB connections all in one.

TP-Link UE330 | USB 3.0 3-Port Hub Gigabit Ethernet Adapter

This is a 3-Port USB 3.0 Hub

This light and compact gadget adds 3 additional USB 3.0 ports to your devices for simultaneous use of a variety of USB devices.
Tips: USB 3.0 supports up to 10x fast data transfer speed as USB 2.0, also backward compatible with USB 2.0/1.1 devices.

This is also a Gigabit Ethernet Adapter

Meanwhile, this light and compact gadget adds Gigabit Ethernet network connectivity to your ultrabook, chromebook, laptop, or desktop, ensuring you up to 1000Mbps reliable wired network connection.

Carry One That Equals Two

Performance: UE330 = 3-Port USB 3.0 Hub + USB 3.0 to Gigabit Ethernet Adapter
Size: UE330 = USB 3.0 to Gigabit Ethernet Adapter

Unpack and Ready to UseNo More Driver Installation*

This user friendly gadget supports Plug and Play feature that enables user to use it by simply connecting it to an available USB port without manual driver installation

*Manual driver installation is required for Mac OS X 10.5-10.8, 10.11

Enhanced Stability & Compatibility

Utilizing advanced chipset solution, this reliable gadget ensures you fast and stable connecntion in Windows, Mac OS X, Chrome OS and Linux OS.

SCP Simply45 Snagless Boot/Strain Relief Cat5E Plugs

S45-B001

SIMPLY45 SNAGLESS BOOT/STRAIN RELIEF FOR SIMPLY45-CAT5E PLUGS- CLEAR COLOR- 100 PIECES PER BAG

Snagless Boot/Strain Relief for SIMPLY45-CAT5E plugs.

These boots lock into the connector allowing both the connector and boot to be crimped in one easy step.

Techlogix Networx Fiber Transceiver

TechLogix SFP and SFP+ transceiver modules adapt TechLogix fiber technology to different cable formats.

The TL-1GSFP-MM550 transmits 1G signals up to 550 meters (1,800 feet) over duplex multimode fiber.

1.25G SFP Transceiver MM, 550m

Cleerline™ SSF-SFP-MM1G transceiver is a high-performance, cost-effective module supporting data-rates of 1.25Gbps and 550m transmission distance with multimode fiber.

This SFP uses the 1000Base-SX standard, popular for short range connections.

The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers follow the industry standards of the SFP Multi-Source Agreement (MSA) and SFF-8472, making them directly interchangeable with any networking device following industry standards.

LC/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ LC/UPC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ LC/UPC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

ProSeries Integrated Strain Relief for all Simpy45® External Ground Shielded RJ45 – Clear – 100pcs/Bag

Simply45® strain relief boots give a finished and professional look to the cable assembly, improving cable management and reducing the chances of accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B004P is an 8.5mm (0.33”) snagless narrow-width strain relief for use with larger diameter shielded LAN cables. The S45-B004P is recommended for all Simply45® PROSeries branded shielded with external ground RJ45 modular plugs. These 8.5mm strain reliefs protect the RJ45 modular plug and extend the useful life of the termination. Simply45® recommends that strain reliefs or boots should be used with all RJ45 terminations.

1000BASE-SX SFP MMF E-Temp DOM Cisco Compatible

The GigaTech Products GLC-SX-MMD-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE 802.3 standard and is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA). This module is designed for multimode fiber and operates at a nominal wavelength of 850nm.

Applications:

• 1.25GBd Gigabit Ethernet

j5create Gigabit Ethernet & 3-Port HUB

The JUH470 USB 3.0 Gigabit Ethernet & 3-Port HUB provides extra connectivity from your computer with 5 Gbps transfer speed. These pocket-sized multi-adapters allow you to add an additional USB peripherals and Gigabit LAN through your USB port. With this Gigabit HUB adapter, you can add networking capabilities to a computer without them through a Wi-Fi connection. It has a RJ-45 connector that supports 10/100/1000 Mbps Ethernet performance and is perfect for your Ultrabook or MacBook.

This adapter is a simple, fast, and portable alternative solution serving multiple needs at once.

Techlogix Networx 1GBASE-LX/LH SFP 1310nm DOM Transceiver

TechLogix SFP transceiver modules adapt TechLogix fiber technology to different cable formats.

The TL-1GSFP-SM20K transmits 1G signals up to 20 km (12.4 miles) over duplex single-mode fiber.

PROSeries 7.3mm Strain Relief with Locking Pin for all Simpy45® UTP Cat6/Cat6A RJ45, Red Tint – 100pcs/bag

CAT5e RJ45 Pass-Through Connectors (Pack of 50)

The Jonard Tools CAT5e RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT5e network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector.

Intended for use with Jonard's RJ11 and RJ45 connector crimping tool: UC-4569

j5create USB Type-C to Gigabit Ethernet Adapter

j5create’s JCE133G is a simple, one-piece external adapter that plugs into the USB-C^™ port on your Ultrabook^™ or MacBook^®. The JCE133G is the ultimate solution if you do not have an Ethernet port or if you just want to increase your speed. The elegantly designed JCE133G uses an RJ-45 connector that supports 10/100/1000 Mbps Ethernet performance. The JCE133G allows you to add networking capabilities to a computer without them through a Wi-Fi connection.

Simply45 Strain Reliefs for all S45 Brand STP External Ground - 100pcs/Bag

Simply45® strain relief boots give a finished and professional look to the cable assembly, improving cable management and reducing the chances of accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B003 is an 8.5mm (0.33”) snagless strain relief for use with larger diameter shielded LAN cables. The S45-B003 is recommended for all Simply45® brand shielded with external ground RJ45 modular plugs. These 8.5mm strain reliefs protect the RJ45 modular plug and extend the useful life of the termination. Simply45® recommends that strain reliefs or boots should be used with all RJ45 terminations.

Simply45® S45-B003 – 8.5mm (0.33”) Snagless Strain Reliefs Features:

For Large Diameter LAN Cables. The Simply45® S45-B003 is designed to work with most large diameter LAN cables. It can work with cable diameters up to 8.5mm (0.33”). We recommend this strain relief/boot for all Shielded with External Ground RJ45 modular plugs. You can also use these strain reliefs with other unshielded large-diameter LAN cables such as Cat6 Shielded and Cat6 Shielded Direct Burial.

Prolongs Life of the Termination. The S45-B003 takes the strain off the terminated plug. When you do not use a strain relief, any contact with the plug or cable puts strain directly on the terminated plug. Over time this could cause one or more of the RJ45 pins to become loose. If a pin becomes loose it will create electrical resistance.  Resistance creates heat. This could then cause performance problems or damage to the device socket.

Fits Over the Terminated RJ45 Modular Plug. The S45-B003 is designed to fit over Simply45® shielded with external ground RJ45 modular plugs.

Maintains Correct Bend Radius of the Termination. The Simply45® S45-B003 Strain Reliefs protect the terminated RJ45 from damage during the life of the link or channel. Maintaining industry standards bend radius is important for maximizing the link/channel performance.

Professional Finish. In addition to protecting the termination and extending the operating life of the link/channel, the S45-B003 strain reliefs also provide a professional finish to your terminated RJ45.

Trimmable. The S45-B003 strain reliefs are trimmable so that you can adjust the bend radius if necessary, to work in very tight installations.

Clear Color. The S45-B003 strain reliefs come in a clear color so that it easily works with all cable jacket colors.

Snagless Design. The S45-B003 strain reliefs are a snagless design. This prevents broken latch tabs on the RJ45 modular plugs.

Wide Mouth Resealable Bag for Easy Hand Access. No need to spill RJ45 mod plugs out of the bag just to reach them. The S45-B003 strain reliefs bag packaging stands up and can remain open so that you can easily reach in and remove the strain reliefs.

PROSeries Strain Relief with RED Locking Pin for all Simpy45® UTP Cat6/Cat6A RJ45 - 100pcs/bag

Simply45® strain relief boots with red locking pin will greatly reduce truck roll backs from tampering with network connections and accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B002P – Integrated Snagless Strain Reliefs lock into the RJ45 modular plug so that both the plug and strain relief can be permanently attached to the Simply45® RJ45 modular plug during the crimping cycle.

The Simply45® S45-B002P strain reliefs extend the useful life of the RJ45 modular plug termination and should be used with all terminations. It is also Fast and Easy to Use.

NOTE: The S45-B002P is designed to work with the following Simply45® part numbers: S45-1550, S45-1600/1601; S45-1700/1700P; S45-1100. For Cat5e Unshielded RJ45 modular plugs S45-1500/1501; S45-1000, please use our S45-B001 strain reliefs.

Simply45® S45-B002P Integrated Snagless Strain Reliefs for Cat6/6a and Cat5e Shielded with Internal Ground Features:

Prolongs Life of the Termination. The S45-B002 takes the strain off the terminated plug. When you do not use a strain relief, any contact with the plug or cable puts strain directly on the terminated plug. Over time this could cause one or more of the RJ45 pins to become loose. If a pin becomes loose it will create electrical resistance. Resistance creates heat. This could then cause performance problems or damage to the device socket.

Commercial Rated UL94 V0. The Simply45® S45-B002P RJ45 modular plug strain reliefs are UL94 V0 (IEC 60695-11-10) rated for all commercial installations. These strain reliefs are recommended for CMP Plenum, CMR, CM; and LSZH up to B2ca rated LAN cables.

Narrow Design for Easy Access. The S45-B002P strain reliefs are the same width as the RJ45 modular plug. Most common strain reliefs slide over the RJ45. This makes the terminated connector much wider and difficult to use in multi-port patch panels and devices. Therefore, many installers decide to forgo using strain reliefs. The Simply45® S45-B002P strain reliefs lock into the plug during the termination and maintain a very narrow profile. This allows easy access to the plug in these tight installations.

Maintains Correct Bend Radius of the Termination. The Simply45® S45-B002P Integrated Strain Reliefs protect the terminated RJ45 from damage during the life of the link or channel. Maintaining industry standards bend radius is important for maximizing the link/channel performance.

Professional Finish. In addition to protecting the termination and extending the operating life of the link/channel, the S45-B002P strain reliefs also provide a professional finish to your terminated RJ45.

Trimmable. The S45-B002P strain reliefs are trimmable so that you can adjust the bend radius if necessary to work in very tight installations.

Clear Color. The S45-B002P strain reliefs come in a clear color so that it easily works with all of the Simply45® RJ45 modular plugs indicated above.

Snagless Design. The S45-B002P strain reliefs are a snagless design. This prevents broken latch tabs on the RJ45 modular plugs.

Wide Mouth Resealable Bag for Easy Hand Access. No need to spill RJ45 mod plugs out of the bag just to reach them. The S45-B002P strain reliefs bag packaging stands up and can remain open so that you can easily reach in and remove the strain reliefs.

PoE/PoH Rated. The S45-B002P strain reliefs are ideal for PoE/PoH applications. They are Commercial Rated UL94 V0 to match their RJ45 modular plugs.

PROSeries Pass Through Red Tint, Hi/Lo Stagger - Cat6/6a UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® ProSeries Unshielded Pass Through RJ45 Modular Plugs with Cap45® for 23AWG Solid (Cat6/6a UTP), Hi/Lo Stagger, Wire Conductors 1.05mm-1.2mm/0.041″-0,047″, Max Cable OD 7.4mm/0.0291″, UL94 V0 Commercial Rated, Red Tint- 50pc/Clamshell

Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions introduces our ProSeries Pass-Through RJ45 Modular Plug, S45-1700P for unshielded LAN cables. This exclusive patented pass-through RJ45 modular plug is a historic breakthrough in “pass-through” RJ45 reliability and performance.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

Pass Through Cat6 UTP, Green Tint - 20pcs/Bag

Simply45 Unshielded Pass Through RJ45 Modular Plugs for 23AWG Solid (Cat6 UTP), 26-24AWG Stranded (Cat5e/6 UTP), Wire Conductors 0.95mm-1.05mm/0.037″-0.041″, Max Cable OD 7.0mm/0.276″, UL94 V0 Commercial Rated, Green Tint

PROSeries Pass Through Green Tint - Cat6 UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

Pass Through Cat5e UTP, Blue Tint - 20pcs/Bag

Simply45 Unshielded Pass Through RJ45 Modular Plugs for (Cat5e UTP) Solid 24AWG, (Cat5e/6) Stranded 28-26AWG, Wire Conductors 0.95 – 1.05mm/ 0.037″ – 0.041″, Max Cable OD 6.5mm/0.255″, UL94 V0 Commercial Rated, Blue Tint

PROSeries Pass Through Blue Tint - Cat5e UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® is the industry-leading brand for RJ45 modular plug innovation and performance solutions. *Our S45-1501P is the same as our S45-1500P except is packaged in a convenient 50-piece plastic clamshell.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

Standard Cat5e RJ45 Modular Plugs, Blue Tint - 20pcs/Bag

Simply45 Unshielded Standard WE/SS (8P8C) RJ45 Modular Plugs for 24AWG (Cat5e UTP) Solid, 28-24AWG (Cat5e/6 UTP) Stranded, Wire Conductors 0.95 -1.05mm/0.037″-0.041″, Max Cable OD 6.4mm/0.252″, UL94 V0 Commercial Rated, Blue Tint

1.25G SFP Transceiver SM BiDi T:1310/R:1550nm, 20Km Max Reach, w/DDM

Bi-directional (BiDi) SFP transceivers are high performance, cost effective modules supporting dual data-rates of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. These SFPs use Wavelength Division (WDM) technology, mixing two wavelengths simultaneously. 

This SFP module accepts 1 LC connector and must be used as a pair: SSF-SFP-SM1GBDA matched with SSF-SFP-SM1GBDB. 

The SSF-SFP-SM1GBDA consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. 

The SSF-SFP-SM1GBDB transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. 

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA. 

1.25G SFP Transceiver SM, 20Km

Cleerline™ SSF-SFP-SM1G transceiver is a high performance, cost effective module supporting data-rates of 1.25Gbps / 1.0625Gbps and 20km transmission distance with single-mode
fiber.

The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

10G SFP+ Transceiver MM, 300m

Cleerline™ SSF-SFP-MM10G is a 10G SFP+ transceiver designed for multimode fiber (MMF) applications, offering high-speed data transmission at 10 Gigabit speeds. This module supports a maximum reach of 300 meters using 50/125 µm multimode optical fiber and operates at an 850nm wavelength. The SSF-SFP-MM10G is compliant with the 10GBASE-SR standard and is ideal for short-range data communication.

The SSF-SFP-MM10G features a low-power, hot-pluggable design with an 850nm VCSEL transmitter and a PIN photodetector, ensuring efficient data transmission. It offers a maximum link length of 300 meters on 2000 MHz/km MMF and supports operating temperatures from 0 to 70°C. The module's electrical interface is compliant with SFI specifications, and it includes advanced firmware for system encryption. Its all-metal housing provides superior EMI performance, making it a cost-effective solution for high-density port applications.

This transceiver is suitable for various applications, including 10GBASE-SR at 10.3125Gbps, 10GBASE-SW at 9.953Gbps, and other optical links. It is designed for use in data centers, enterprise networks, and high-speed storage area networks (SANs), ensuring reliable and efficient data communication. The SSF-SFP-MM10G's compliance with IEEE 802.3ae and MSA SFF-8431 standards ensures compatibility with a wide range of networking equipment, making it an ideal choice for upgrading and expanding network infrastructure.

ST/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ ST/UPC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ ST/UPC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

ST/APC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ ST/APC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ ST/APC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

ST/UPC Multimode OM3-4 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ ST multimode OM3/4 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your multimode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ ST multimode OM3/4 Connectors are compatible with all SSF™ fibers as well as standard 50/125 multimode fibers.

Cat5E, RJ-45-Ezpass, UTP Modular Plugs, Pass-Through Style, 100Pcs./Jar, Red Color Cap

CAT5e RJ45 Pass-Through Connectors (Pack of 100)

The Jonard Tools CAT5e RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT5e network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector.

Intended for use with Jonard's RJ11 and RJ45 connector crimping tool: UC-4569

RJ11 Pass-Through Connectors (Pack of 100)

The Jonard Tools RJ11 Pass-Through Connectors are used by network installers/technicians in order to terminate telephone cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating flat or round telephone cable or even replacing an existing connector (CAT3 or other similar).

USB-C® to 2.5 Gigabit Ethernet Adapter

j5create’s JCE145C is a simple external adapter that plugs into the USB-C® port on your laptop or MacBook®. The JCE145C is an optimal solution if you do not have an Ethernet port or if you just want to increase your network speed. A USB™ Type- A adapter is connected for added compatibility with devices that lack the Type-C port.

The elegantly designed JCE145C uses an RJ-45 connector that supports 2.5 Multi-Gigabit Ethernet performance.

System Requirements:

• Windows® 10/11
• Windows Server™ 2016/2012/2008R2/2008 or later
• macOS® 10.8 or later
• Linux® Kernel up to 5.17
• Chrome OS™
• Native Driver Support, no additional driver needed for Windows® 10/11, macOS® 10.8 later
• Available USB-C® port

Special Notes:

• No driver installation is required

SCP 10GBASE-LR SFP+ 1310nm DOM Transceiver

The F-SFP10G-SM transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432, and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L Digital diagnostics functions are available via a 2-wire serial interface.

The transceiver is alimiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant with the RoHS Directive 2011/65/EU.