Multimode

24 Port Optical Fiber Keystone Module Panel (266-PKM04 Series)

Optical Fiber Rack-Mount Panel, Front-Retractable Keystone-Module Blocks, Label Holder, 1-RMU, 24-Position.

SSF™ LC MM Duplex Connector clip w/Polarity Tubes

Convert individual Cleerline™ LC connectors to duplex assemblies with our LC mm Connector Clips. Simply snap LC connectors into the clip and go! Our specialized design holds connectors securely, allowing easy connection to duplex ports. Disconnection of the assembly is also simple due to the clip’s large push bar, which simultaneously depresses both LC connector tabs.

For ease of identification, each clip features A/B connector labeling. Yellow and white polarity connection tubes are also included in each package. Place tubes on cables prior to terminating cables and installing clips.

6 Port Multimode LGX Metal Splice Cassette, Multicolored 36" Pigtails

Optix America splice cassettes eliminate the need for separate splice trays in a rack and offer easy modular management. Built for durability, each cassette has rugged all metal construction and comes fully equipped with 900μm multicolored 0.5 meter pigtails, preloaded adapters, splice chips, built-in cable management, one modular cable gland, and one modular firewall plug. Spacious interior design significantly increases work efficiency. These cassettes fit seamlessly into your network, offering native compatibility with LGX 118 enclosures as well as Corning CCH and PCH enclosures when using a separate Corning bracket.

6 Port Singlemode LGX Metal Splice Cassette, Multicolored 36" Pigtails

Optix America splice cassettes eliminate the need for separate splice trays in a rack and offer easy modular management. Built for durability, each cassette has rugged all metal construction and comes fully equipped with 900μm multicolored 0.5 meter pigtails, preloaded adapters, splice chips, built-in cable management, one modular cable gland, and one modular firewall plug. Spacious interior design significantly increases work efficiency. These cassettes fit seamlessly into your network, offering native compatibility with LGX 118 enclosures as well as Corning CCH and PCH enclosures when using a separate Corning bracket.

3X 900um Multimode Mechanical Connectors - 10 Pack

The Optix 3X 900um mechanical connector features a simple two-piece design, allowing for fast and consistent field termination in under two minutes. These connectors are reusable up to three times, which helps avoid costly scrapped connectors due to "failed" connections.

Optix connectors utilize Corning fiber and are compliant with TIA/EIA 604-3. They are available in LC, SC, and ST styles and are designed to be spliced with either 900um or 250um single-strand tight buffer or loose tube cable. This simple termination process ensures reliable connections in field applications.

Traditional 1X 900um Multimode Splice-on Connectors - 10 Pack

The Optix 1X 900um Splice-on connector is a simple three or four piece design compatible with all brands of fusion splicers on the market today. It features a fast and consistent field termination in less than two minutes. The fiber stub comes stripped, cleaned, and cleaved and ready for splicing on most fusion splicers. Made with Corning brand fiber cable, it is available in LC, SC, and ST styles. Single mode connectors are compliant to Telcordia GR-326 and multimode connectors are compliant to TIA/EIA568C.3. EZ-Open packaging organizes the parts and saves time.

Universal Re-Spliceable 3X 900um Multimode Splice-on Connectors - 10 Pack

The Optix Universal field-installable 3X splice-on connector is designed to significantly improve efficiency and reduce costs in fiber optic installations. One of its key advantages is the patented design that allows for multiple uses, offering up to three opportunities for a correct splice. This innovative feature helps eliminate the common "one-and-done" problem associated with other connectors, where a failed splice often means a scrapped connector, leading to unnecessary waste and expense.

The Optix 3X splice-on connector is incredibly versatile and user-friendly. It can be easily spliced using any brand of fusion splicer and does not require a special SOC holder. You can simply use the standard sheath clamp or fiber cable holder that comes with your fusion splicer.

Another significant benefit is the flexible and reliable silicone strain relief boot. The strain relief boot allows for easy and neat routing within various enclosures and wall-mount boxes. Its long length and stainless steel 30mm splice sleeve offers robust protection for the delicate splice point.

The Optix 3X 900um splice-on connector features a simple three-piece design, ensuring fast and consistent field termination. It's ready for splicing on any fusion splicer and is made with high-quality Corning cable. These connectors are available in LC, SC, ST, and FC styles. Our multimode connectors comply with TIA/EIA568C.3, and our single-mode connectors meet Telcordia GR-326 standards.

25G SFP28 SR Transceiver MM, 100m

Cleerline™ SSF-SFP28-25GSR is a high-performance 25G SFP28 SR Optical Transceiver designed for short-range multimode fiber (MMF) communication, supporting distances of up to 70 meters over OM3 and 100 meters over OM4. This single-rate module is compliant with IEEE 802.3by 25GBASE-SR optical specifications and features a dual-directional design with a duplex LC optical connection. It is backward compatible with legacy 10G SFP+ modules, providing flexibility for various network upgrades. The module operates with a single +3.3V power supply and supports a control management interface via a 2-wire serial interface, which facilitates serial ID, digital diagnostics, and module control functions.

The SSF-SFP28-25GSR transceiver is equipped with a 25G 850nm VCSEL transmitter and a 25G PIN photo-detector, ensuring reliable data transmission and reception. It features an all-metal housing for superior EMI performance and operates within a temperature range of 0 to 70°C. The module supports digital diagnostic monitoring compliant with SFF-8472 and has a maximum power consumption of 1.0W. It is ideal for high-speed storage area networks, computer cluster cross-connects, custom high-speed data pipes, and inter-rack connections, providing robust and efficient solutions for modern data communication needs.

Extend an Ethernet connection up to 550 Meters over Multimode Fiber

Tripp Lite's N784-001-SC-MM 10/100 to Multimode Media Converter ( RJ45 to SC ) is an economical way to extend the distance of network nodes up to 550 Meters by converting Cat5e UTP cables to Multimode Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically. Auto-detects half or full duplex operation on the fiber port. Power supplied by small form factor AC adapter.

• Extends a 100Mb Ethernet signal up to 550M over Multimode Fiber Optic Cable
• Auto detects Full/Half Duplex Transfer Mode
• Supports Multimode 50/125 cable up to 2KM or 62.5/125 cable up to 550M

System Requirements:

• 10/100 Ethernet Network
• Multimode SC Fiber cable

Techlogix Networx 10GBASE-SR SFP+ 850nm DOM Transceiver

TechLogix SFP and SFP+ transceiver modules adapt TechLogix fiber technology to different cable formats.

The TL-10GSFPP-MM300 transmits 10G signals up to 300 meters (984 feet) over duplex multimode fiber.