Low Voltage Brackets and Box Eliminators
Single Gang Junction Box
Single Gang Junction Box
Not all walls are created equal, especially when it comes to installation projects. Sometimes location, building code, or materials prevent running wires in the wall. Brick and cement walls are especially challenging, but that doesn’t mean you’re out of options. With a surface mount box like the SINGLE-GANG, you can create a way to attach wall plates without having to cut into your wall. Any low voltage wall plate will work: keystone, speaker, decora, HDMI. Just attach the wall plate to this single gang box like you would any other low voltage bracket using the two machine-threaded screw casings.
The SINGLE-GANG is designed for surface use and is not meant to be recessed fully into the wall. It offers several points of access for running your cables to it and through it. There are two rectangular knock-outs for use with Raceway cable cover systems and a 1.25” opening for conduit. To affix this single gang box to a wall, floor, or other surface, there are several holes to accommodate screws, nails, or other hardware. The smooth plastic is not porous enough to accept latex-based paints, but this single gang surface mount box is also available in beige.
Arlington Nail On Low Voltage Mounting Bracket for New Construction
Arlington Nail On Low Voltage Mounting Bracket
Install your low voltage cables in a fraction of the time with the Arlington LVN Nail-On Mounting Bracket. The non-metallic, non-conductive, plastic construction makes them perfect for Class 2 networking and audio-video cabling runs. Designed for bare wood studs in new construction areas, these brackets come with a pair of angled captive nails and arrive ready to install. Simply tap the nails into the side of the exposed stud and you’re done.
They include a molded loop for tying off wires and a side tab for added stability. The unique side-fastening nail-in process also increases accuracy by decreasing pushback. The LVN low voltage mounting bracket is for use with standard wallplates and faceplates. These nail-in style boxes are also available in two, three, and four-gang configurations. They are UL listed and CSA rated for low voltage use and are not compatible with electrical wiring.
From $1.37 - $6.64
Garvin Low Voltage Device Box Eliminator Ring
Garvin WBF-1 Low Volt Box Eliminator Ring
Help Eliminate Gangs
Limited wall room but need a wall plate? This product will eliminate the large gang box, allowing you to insert into any wall.
With the elimination of a standard gang box, you will be able to work with a deal more room. The blue (gang) box also makes cable management a hassle as thick, inflexible wire won't want to go back in properly. This leads to awkward angles that cause wear and tear and even a distortion in signal. Not all walls can support a regular gang box, and if you need an outlet in that particular place then you are essentially out of luck--unless of course you have one of these.
Arlington DVFR2W Recessed Indoor InBox for New & Retrofit Construction
Arlington TVB2GW Recessed Wall Box
Arlington's non-metallic recessed indoor InBox allows items such as furniture or televisions to be placed closer to the wall. Arlington's InBox uses mounting wings to attach to the wall, so it is ideal for new or retrofit construction. This two gang 34.0 cubic inch InBox comes in white, is cULus listed, and has a two-hour fire rating. It comes with the recessed box, trim plate, wall plates, low voltage divider, and mounting/installation screws.