Cat6 Ethernet Patch Cable, Black
Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.
With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.
All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.
Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.
All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.
From $1.11 - $37.20
USB Printer Cable - USB A Male to USB B Male (3-15ft)
Printing Made Easy
There have been many ways to get your printer hooked up to your computer over the years. For example, parallel port (LPT) was used back in the late 1990s. It was a large, bulky adapter end that could easily just stop working properly if any of its many pins got bent or broken. It was inconvenient and annoying.
Well, nowadays, it’s far less stressing to attach your printer to your computer. Modern day printers typically use a USB printer cable. USB printer cables have two different ends on them - one square that goes into your printer and the other flat to go into your computer. Our USB printer cables here at FireFold are top notch! We provide them in a variety of colors and lengths to ensure that we can meet your needs.
Our printer cords are rated for USB 2.0 which allows for hi-speed transfers of up to 480 Mbps. This is 40 times faster than the previous standard, USB 1.1. These cables are still backwards compatible and can even be used in most USB 3.0 ports. So, you should be able to find somewhere on your computer to tether your printer up with little effort on your part.
Each USB a to USB b cable is a thick 28 AWG, ensuring plenty of durability. This specific cable is three feet in length and colored black. The printer cords are each individually packed for extra protection when shipped or picked up from our offices here in Concord, North Carolina.
You really cannot go wrong with getting your hands on one of these cables. Be it for your home, office, dormitory, or small business - you are sure to be able to get one that will work for you. With FireFold’s lifetime warranty, you can rest assured that we will help you get the cable swapped out if it ever has manufacturer issues.
From $1.91 - $3.49
USB Extension Cable - USB 2.0 Type A Male to Female
Closing the Distance
The USB cable you have not quite long enough for the task at hand? Well, we’ve got you covered here at FireFold! We have a wide variety of USB extension cables. We have a pretty decent size selection of lengths and a handful of colors with our USB extension cables that are sure to fit what you’re trying to do. Printer not close enough? No problem! Grab one of these USB extension cables and you’re all set.
Don’t stop your consideration of this product at our printer example! These USB cable extensions can be used with a variety of products. Game controller for your PS3 not long enough? Here you go. Wired USB keyboard or mouse just not far enough for you? Tada! The possibilities are endless when you sit back and think about all of the products available on the market that use USB.
Each of our USB active extension cables are rated for USB 2.0, able to handle hi-speed 480Mbps transmission with no issues at all. This is 40 times faster than the previous USB 1.1, though these cables are still backwards compatible with that previous level of USB. Each USB cable extension delivers more power with 28 gauge, double-shielded conductors.
The actual process of extending out your USB cable is pretty simple. Get one of these USB cable extensions, plus your current USB cable into the female end of this cable, and then plug the male end of this cable into your charging adapter or computer. That’s it! The extension is complete and plug-and-play should begin!
With FireFold’s lifetime warranty, you absolutely cannot go wrong with grabbing a few of these cables for your home or business. With such a variety of tasks they can help you with extending out, you are sure to need one on hand from time to time. With a price that most places cannot beat, how can you say no?
From $1.23 - $3.49
Cat5E Ethernet Patch Cable, Black
The Enhanced Performance You Need When It Couldn't Be More Important
Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.
When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.
For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.
But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.
The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.
As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.
From $0.85 - $33.93
DisplayPort to DisplayPort
FireFold’s DP-MM is a DisplayPort Male to DisplayPort Male cable. DisplayPort is one connection that is rapidly gaining popularity. Its versatility and royalty-free usage makes it appealing to modern device developers. Although it can transmit nearly any type of signal, it is often used to send video (and sometimes audio) from a laptop or desktop computer to a monitor. Capable of handling many of the same video standards as HDMI, this cable can support resolutions of 1080p at 120Hz. For higher-resolution monitors, it can also support 3840 x 2160 at 60Hz.
DisplayPort cables support simultaneous transmission of audio and video much like HDMI, but your source must be designed to output audio through the DisplayPort connection to enjoy this feature. The DisplayPort interface also supports hot plugging, which means you do not have to reboot your device for it to be recognized as connected. You may, however, have to change your audio settings to output through the correct port. With the DP-MM, copper conductors and full shielding against electrical interference help your signal stay pure from source to display. Metal-plated connectors also offer the strength and longevity our lifetime warranty is known for.
From $9.01 - $15.44
USB 2.0 Cable - Type A Male to Male
There are many USB cables out on the market. The one you are looking at right now is the A to A USB cable. This is not a standard cable that you see used for a variety of tasks but used for a specific few. This USB cable typically will be used to hook up the handful of devices, that have this connection on them, to a computer or other device. Since both ends are matching flat male adapters, this is not a connection used for extending the length of your run.
One should also keep in mind that USB A to A cables are typically not intended for transferring data between two computers. This can actually short circuit the cable in many cases and cause damage to either computer, if not possibly both, that are being hooked up to each other. This is a common misconception and we always like to make sure our customers are informed fully about their products before purchase.
Each of our USB A to A cables is individually packaged for durability. They are flexible, 28 AWG cords that are not too stiff. Plus, with their sturdy A to A connectors on either end, they are extremely durable for many connect and disconnect situations. The specific cable you are looking at now is three feet in length and comes in the color of ivory (white). Plus, it is rated for USB 2.0 - capable of transferring speeds of up to 480 Mbps with ease. With each of our A to A cords being backwards compatible, you can still use these on USB 1.1 systems just as easily as 2.0 systems.
With FireFold’s signature lifetime warranty, you really cannot go wrong with purchasing one or a few of these cables for your project. At the price we provide, your wallet will rejoice in the money you save and you will be happy knowing that you can come to us if you ever have a manufacturer issue that needs to be resolved.
From $1.69 - $3.09
Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Black
Quality You Can Depend On And Performance That Can't Be Beat
Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.
Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.
So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.
As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.
All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.
From $3.49 - $89.06
Cat5E Shielded Ethernet Patch Cable, Snagless Boot, Black
350 MHz FTP Cords With Performance to Spare
When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.
When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.
For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.
Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.
As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.
On Sale from $2.02
Cat6A Ethernet Patch Cable, Snagless Boot, Black
These network cables enable 10-Gigabit data transmission over a 4-connector twisted pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.
Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.
From $2.58 - $32.69
Cat8 S/FTP Shielded Ethernet Patch Cable, Snagless Boot, Black (0.5-50ft)
FireFold now offers Cat8 Ethernet Network Cables. These cables are capable to reach up to 40Gbps transfer speeds and up to 2GHz bandwidth using copper conductors and RJ45 connectors. Cat8 Ethernet Cables are the first future proof, cost effective, high performance solution. Cat8 patch cables are backwards compatible with all categories: Cat5e, Cat6, Cat6A, and Cat7.
From $9.01 - $73.05
Cat6A Slim Ethernet Patch Cable, Snagless Boot, BlackThe FireFold CAT6A Slim Line Ethernet cable is the solution to reduce congestion in high-density CAT6A Network environments, such as data centers,telecommunication, and server rooms. With the Cat6A Slim Line cable, you can fit more cables in the same space. The slim cable diameter is almost half that of a standard CAT6A cable.
From $2.36 - $19.72
Hospital Grade Power Cord 5-15P to C13 SJT 18/3
Why use a Hospital/Medical Grade Power cord ?
Hospitals have lots of sensitive and big electronic equipment that can't afford to fail. So it makes sense to use good power cords in hospitals. Power cords that are used in hospitals and medical equipment must conform to strict standards for grounding reliability, strength and durability, and met strict standards such as NEMA and IEC specifications. Our manufacturer applies rigorous tests to ensure that the cable operates at peak levels. Once a product is approved, it is stamped with a GREEN DOT, which is the mark of hospital grade power cords.
These standards are in place to ensure that the hospital-grade power cords are safe and reliable for use in demanding hospital environments.
From $4.27 - $10.36