IR Extenders

The Vanco 280738 Single IR Emitter is designed for use with home theater IR repeater systems. It transmits IR signals for remotely controlling audio/video equipment. The discreet design and included adhesive pad make installation quick and easy.

NextGen 3-EYE 3 Eye LRRX Cable

Third Eye

The 3-EYE is designed for use with the LRRX-BLUE-433, LRRX-RED-418, or other remote control extender kits manufactured by Next Generation Home Products. These state-of-the-art transmitter and receiver kits allow you to use your remote control far beyond traditional IR capabilities. You can easily reach components up to 100 feet away through doors, floors, and walls. Each receiver unit broadcasts an IR signal to any components facing it, and the kits come complete with a single-eye emitter. But if you have multiple components stacked or set apart from each other, the IR signal can have trouble getting where it needs to go.

This 3-Eye LRRX emitter replaces the single-eye cable you get with your kit to expand your control abilities. It allows you to send the signal to up to three different components. The extra-long cable also allows your components to be up to 8 feet away from the saucer-shaped receiver, giving you flexibility and accommodating a variety of home theater system set-ups. To set up, plug the emitter into the Next Gen receiver unit. Peel the paper off of the adhesive on the underside of the emitters and stick to the IR windows of your components or to a surface directly in front of the IR window.

ADAPTER IR SENDER 1.5M

<!-- features -->

• IR Transmitters- Receivers- and Adapters are compatible with Vanco’s HDMI Matrixes- Splitters- Switchers- and Extenders that are enabled with Super IR technology
• HDMI IR Adapter Allows for IR Control over any Vanco HDMI Cable
• Extends IR Signals more than 100m/328ft
• Supports Dual Band IR
• HDMI IR Adapter is IR or CEC Configurable

NextGen 6-EYE 6 Eye LRRX Cable

Got more than one component you'd like to control with the receiver? Next Generation Home Products offers a unique triple-eye emitter tether cord that works with either unit -- allowing up to 6 components to be as much as 8 feet apart away from the receiver. Simply mount each emitter eye next to the specific component or on the entertainment cabinet door facing the component you want to control from up to 100+ feet away.

10 Foot Dual IR Emitter - 3.5mm Mono Plug (Male)

Techlogix Networx TL-IR-CC IR Coupling cable 

How many times have you had to output an IR signal from your control system to the input of an HDMI extender? In the CI world, this is an extremely common requirement. For years, the solution has been to tape the IR emitter from the control system to the IR receiver of the extender. Sometimes, the IR receiver is designed to rest on a surface and features a rounded, aesthetically pleasing appearance, but this makes attaching the IR emitter with a flat base difficult. Then, you have a wad of tape in the middle of two thin wires that turn that expensive installation into an unsightly mess. This is where the TL-IR-CC comes in.

The TechLogix TL-IR-CC allows direct IR to IR connections between devices. The IR IN (TRS) connector is compatible with an IR input which provides +5V DC to the tip of the connector. The TL-IR-CC allows a direct connection between the IR output of a third-party control system and a Techlogix extender. The TL-IR-CC will also allow daisy-chaining IR signals between Techlogix extenders.

Single IR Emitter - 3.5mm Mono Plug (Male)

FireFold's IR emitter is one of the top notch transmitting cables that we provide. The cable is round and has a compact size with built-in transmitter. It also runs either 6.5ft or 10ft long with a 3.5mm mono male at one-end and IR emitter at the opposite end. IR emitter features adhesive tape for quick and easy fixing on any hard clean dry surface of the device that the customer desires to operate.

The Vanco 280739 Dual IR Emitter is designed for use with home theater IR repeater systems. It transmits IR signals for remotely controlling audio/video equipment. The discreet design and included adhesive pads make installation quick and easy.

Metra IR Kit With 1 Bar Receiver and 4 Emitters

Metra IR Kit with 1-RX and 4-Dual Emitters for AC adapter