HDMI - Other

Vanco Brush Bulk Cable Plate

This Bulk Cable Wall Plate from Vanco comes with a brush insert to help organize multiple cables. Provides a professional, finished look to your installation. Route your HDMI Cables and Audio/Video Cables for a home theater installation, or route network cables and VGA cables for a network Installation.

Vanco Slim Bulk Cable Wall Plate

Simplify your cable installation with the WP-SLIMBULK from Vanco. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The minimum clearance for this plate is 1-3/16” and it is wide enough to accommodate the head of a VGA cable. The low, flattened profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

DataComm Recessed Bulk Cable Plate

Use DataComm Electronics recessed low voltage cable plates to install low voltage cables behind your flat panel TV, your amplifier or other audio/video devices. These recessed bulk cable plates are designed to be used with low voltage mounting plate brackets by any major manufacturer.

The recessed low voltage cable plates can be installed upright or upside down. Install the 45-0001/2 upside down when installing flat panel TV’s.

Determine the location of your flat panel TV, amplifier or audio/video device. Cut a hole in the wall and install the low voltage mounting plate bracket. Then simply pull your cables through the mounted low voltage mounting plate bracket and then through the DataComm Electronics recessed low voltage cable plate. Insert the DataComm Electronics recessed low voltage cable plate into your mounted low voltage mounting plate bracket and secure tightly with the wall plate screws.

Slim Line Standard HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has 2 HDMI ports connected by a short cable. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

Vanco WPBWW Bulk Cable Wall Plate

Simplify your cable installation with Vanco’s WPBW. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The low 1-1/4” profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

Garvin 1 Gang Recessed Low Voltage Cable Plate

The Garvin LVP1NP 1 Gang Recessed Low Voltage Cable Plate is a versatile cable management tool. This wall plate allows you to easily route multiple cables through a single opening for a clean, finished look to your installation. It can be mounted upright or upside down to meet your specific requirements and provide the best angle for cable routing. This cable plate includes mounting screws for added convenience.

Vanco Hinged Bulk Cable Wall Plate

Prepare for the unexpected with the 120617 bulk wall plate by Vanco. The patented design offers many advantages over a standard pass-through plate. A unique side-opening hinge allows the user to disconnect the top and bottom halves of this plate so it can be installed around a set of cables. This distinctive feature is especially useful when cables and equipment are already connected or when large connector ends such as VGA and DVI would ordinarily limit the number of cables that fit. The WP-HINGED attaches easily to any single gang low voltage box or bracket, and the pivoting joint requires no additional hardware. With a glossy, natural white shade, this bulk cable plate can create a professional look no matter the visibility.

Vanco Dual HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has dual HDMI cables. Each cable has 2 HDMI ports at either end. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

DataComm Bulk Cable Wall Plate with Flex

DataComm's patented flex bulk cable wall plate provides an easy and convenient way to organize your cables while keeping a clean look to your install. It allows you to pass low voltage cables through the wall, behind your flat panel TV, amp, or other audio/video devices.

The center of the cable plate is made of a flexible plastic, which allows you to pass multiple cables (up to six) through the plate. The attached mounting wings fit snugly against any wall up to 1" thick and eliminate the need for an additional low voltage bracket.

DataComm Décor Insert

Flex Cable Insert

DataComm’s 45-0016-WH Decor Insert is designed for use with Decor and Decora-style wall plates. These bulk inserts allow you to pull a variety of cables straight through at the beginning or end of a wire run, saving time and eliminating an extra connection at the wall. A sheet of thin flexible plastic conceals the cut-in opening and helps prevent dust and other debris from entering your stud bay. The star-style slit can easily accommodate up to four cables including HDMI, coax, and Ethernet. With a low profile and multiple angles of exit, the 45-0016-WH is great behind ultra-slim TV mounts, in entertainment closets, or anywhere else space is limited.

With a durable finish and a simple installation process, the 45-0016-WH is a versatile solution for networking and home theater cable runs. Decor wall plates come in two parts: the face plate and the insert. Using this system, you can mix and match inserts for the combination plate of your dreams. FireFold carries one, two, and three-gang Decora faceplates for use with this bulk pass-through as well as a wide variety of other inserts. To assemble, just attach this insert to your face plate then secure the face plate to a low voltage box or bracket.

Note: Decor faceplate sold separately.

Garvin LVP1 Gang Cable Plate Flex Opening

Make wire management quick and easy with this cable wall plate from Garvin Industries. The flexible opening allows routing of up to six cables, eliminating the need for wall connections and safely corralling cables while keeping the wall opening covered. The cable pass through wall plate features built-in wings, which attach securely to the back of the drywall. As these wings are molded into the plate, it requires no additional parts for installation.

Quest Wall Plate for Bulk Cables

Embrace versatility with the VHT, available from Quest. This bulk cable wall plate can be used at the beginning or end of an in-wall cabling run to create a clean, professional look without creating extra connections or requiring additional time. With a reversible opening, this plate can be changed from a traditional style to a recessed plate. The center spout section detaches with a little pressure so it can be flipped in seconds. Because the pass-through piece can be snapped into place after the wires have passed, the separation makes it easier to pull through cables with larger connectors. The VHT is compatible with any low voltage box or bracket and comes with a pair of matching screws.

HDMI Connection Plate 1 Port With 4 Inch Pigtail Coupler

Create an elegant way to conceal HDMI cables in the wall with this 1 port HDMI connection plate. The white faceplate mounts easily to an single gang wall plate box or bracket. The HDMI port is created using a mounted female to female 8 inch pigtail coupler, which means ultimate flexibility in connecting cables behind the scenes. You won't have to worry about bending and breaking delicate plugs when making your connections behind the wall. The screw-mounted port stays securely in place.

This HDMI pigtail plate supports High Speed version 1.4. It comes with all mounting hardware, so there's no need to purchase separate screws, saving you time and money.

Vanco HDMI Pigtail 3.5mm Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-3.5MM wall plate featuring an HDMI and a 3.5mm jack. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The lead-free HDMI pigtail is extremely flexible to help prevent any positional strain on the small pin connectors and it comes to you completely 3D-ready for seamless integration. The 3.5mm port can be used either for headphone-style stereo audio or for an IR extension connection.

Installing and connecting the WP-HDMI-3.5MM is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future. For basic installations, a drywall saw and a screwdriver are the only tools you will need. These plates do not require much clearance, so they are ideal for hiding behind equipment and televisions or anywhere else where space is an issue.

DataComm 45-0021-WH Bulk Cable Plate

Use DataComm Electronics’ patented new recessed low voltage cable plate with recessed power to install power and low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The 45-0021 recessed low voltage cable plate with recessed power can be installed upright or upside down.

Use either a single gang retrofit work box or for new construction installations, use a new nail on box. Once you have wired the receptacle*, then begin by inserting the receptacle portion of the plate into the work box. Once the entire recessed plate is flush to the wall, using the two white screws supplied, screw the receptacle portion of the plate to the work box. Next, screw down the screws with wings. These wings will fasten tightly against the back of the drywall. Plug in all necessary video and audio cables. Install your flat panel TV mounting bracket per the flat panel TV bracket manufacturer’s instructions.

DataComm 45-0009-WH Bulk Cable Plate

Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier, or other audio and video devices. The wall plate can be installed upright or upside down.

This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate in a single gang profile.

The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat-panel TVs.

The Slim-Fit version of the Easy Mount Recessed Cable Plate is designed for use in concrete wall applications where the wall cavity is 3/4" to 1" in depth.

DataComm 45-0041-WH Recessed Low Volt Plate

The patented Recessed Low Voltage Media Plate with Duplex Receptacle/Duplex Surge Suppressor offers the convenience of a duplex receptacle and a recessed plate with enough room to store low voltage cables behind your flat panel TV. This box is available in surge and 20 amp commercial-grade models.

Slim HDMI Pigtail Component Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-COMP, a décor-style wall plate featuring HDMI and RGB red, green, and blue component jacks. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The lead-free HDMI pigtail is extremely flexible to help prevent any positional strain on the small pin connectors and it comes to you completely 3D-ready for seamless integration.

Installing and connecting the WP-HDMI-COMP is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor faceplate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Vanco HDMI Component Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-RGBRCA, a wall plate featuring HDMI, RGB component video, and RCA audio jacks. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The HDMI port comes to you completely 3D-ready for seamless integration.

Installing and connecting the WP-HDMI-RGBRCA is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket much like any other wall plate. For basic installations, a drywall saw and a screwdriver are the only tools you will need. These plates do not require much clearance, so they are ideal for hiding behind equipment and televisions or anywhere else where space is a concern.

Vanco 1 Gang Wall Plate 

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s HTWP62BW 6.2 Home Theater Connection Wall Plate is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is compatible with three-gang junction boxes and low voltage brackets and it includes a convenient bulk pass-through spout for your other home theater cables. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With six pairs of red and black binding post connections and two RCA subwoofer jacks, this wall plate is thorough and flexible.

Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note the subwoofer connections on the back side of this plate are screw-on F-style coax, not RCA. All jacks are gold-plated for the seamless signal passage and optimal sound.

DataComm Recessed Media Box w/ Duplex Receptacle

The Recessed Media Box II is designed to streamline power and cable management behind your HDTV. The box features a side cover plate with knockouts for conduit or tube. This is the ideal solution for allowing your TV or other display to be mounted flush to the wall. This box is available in surge and 20 commercial-grade models.

DataComm Recessed Pro-Power Kit with Surge Suppressor

The patented DataComm 45-0024-WH Recessed Pro-Power Kit is an easy-to-install solution for hiding power and audio/video cables behind an HDTV. A duplex surge supressor receptacle provides power for up to two devices, while a straight blade inlet provides organized cable routing. A flexible serrated screen on the interior of the straight blade inlet keeps cables securely routed.

Expandable Media Box w/ 15 Amp/125 Volt Duplex Receptacle

The Expandable Media Box with Duplex Receptacle/Duplex Surge Suppressor is designed to streamline power and cable management behind your HDTV. The expandable portion of the Media Box allows for maximum storage hidden behind your TV, while still allowing your TV mount to be flush to the wall. This box is available in surge and 20 commercial grade models.

DataComm  1-3/4 Inch Hole Saw Plate

This two-by-two-inch wall plate is designed to conceal low voltage cables behind the smaller home theater and security equipment. The compact design mounts inside a 1-3/4 inch hole and features a 0.77 x 0.87-inch brush opening. Built-in wings enable mounting without the need for a low voltage mounting bracket. Simply tighten the screws into place for a secure hold.

7.1 Home Theater Wall Plate with HDMI

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

FireFold’s 7.1 Home Theater Wall Plate with HDMI and Subwoofer is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is based on the décor style of design which means the three insert panels are fully removable and can be used with other décor face plates. As it comes, this wall plate is compatible with three-gang junction boxes and low voltage brackets. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With seven pairs of red and black binding post connections, one RCA subwoofer jack, and a single high-speed HDMI connection, this wall plate is thorough and flexible.

Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note this wall plate is not 3D or Ethernet ready.

PowerBridge ONE-CK Cable Management System

The ONE-CK cable management system from PowerBridge Solutions is an ideal solution for concealing cables behind wall-mounted HDTVs. It requires no electrical wiring, so no special qualifications or certifications are required. It plugs right into your existing power source!

A bulk cable pass-through allows you to run all your connectivity right alongside your power cable. The convenient PowerConnect power extension cable included is in-wall rated for safety. The deep, recessed receptacle allows for both TV and co-located wall-mounted SoundBar power connection.

For additional compatibility and easy installation, the ONE-CK receptacles are the same dimensions as a standard wall plate, measuring 2.75" in width by 4.5" in height.

DataComm 45-0031-WH Bulk Cable Plate

DataComm Electronics' new, patented Recessed Low Voltage Media Plates offer the convenience of a duplex receptacle and a recessed plate with enough room to store the low voltage cables behind your flat panel TV.

PowerBridge TWO-CK In-Wall Dual Power Kit

The PowerBridge TWO-CK In-Wall Dual Power and Cable Management Kit makes extending your power source behind your TV safe and easy. It's a simple do-it-yourself process with no electrical wiring and no pieces to assemble.

The extra deep 1.5 inch dual recessed outlet mounts into standard drywall and connects to the standard-sized source receptacle using the six foot power extension cord.

Built-in bulk cable feed-throughs make audio/video cable routing an integrated feature. There's no need to install additional plates to house cables. Extra-wide openings accommodate all sizes of TV cords and create more usable space behind the slimmest mounts.

DataComm 45-0008-WH Bulk Cable Plate

Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier, or other audio and video devices. The wall plate can be installed upright or upside down.

This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate in a single gang profile.

The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat-panel TVs.

PowerBridge ONE-PRO-6 Cable Management

Few people know that most local building codes prohibit the in-wall use of ordinary appliance power and extension cords. But that doesn’t mean you have to add “Hire an Electrician” to your to-do list! With the PowerBridge ONE-PRO-6-WH, you can make hiding wires a real one-man job. This wire management kit allows you to create a clean and professional look without fiddling with electrical lines or compromising your safety. It comes with two wall plates: one “in” that draws power from your existing electrical outlet and one “out” that sends that power to your TV.

This kit includes two wall plates, two back boxes, one 6’ length of in-wall Romex, and one 6’ external male to female power cord. Step-by-step instructions and a color-coded wiring template make this an easy project for even the first-time do-it-yourselfer. It can be installed horizontally or vertically onto any one-gang bracket or box. These plates also include a brush-style low voltage cable pass-through, eliminating the need for an additional cut-in for your wires. Recessed into the wall, the ONE-PRO-6-WH is ideal for use behind low profile television mounts or in any location where space is tight.

Warning: This product does not have built-in surge protection or A/C filtering. We recommend connecting it to a quality surge protector or power conditioner for maximum equipment protection. Do not use this product near water.

Datacomm Recessed Pro-Power Kit

The Datacomm 45-0023-WH Recessed Pro-Power Kit with Straight Blade Inlet allows you to conceal power and other low voltage cables behind your HDTV by running them through the wall.

Package Includes

• (1) Recessed Cable Plate with Straight Blade Inlet
• (1) Recessed Cable Plate with Power
• (1) 6ft 16/2 w/Ground Extension Cord
• (1) Electrical Outlet Boxes
• (3) Wire Nuts

DataComm Recessed Receptacle

The patented DataComm 45-0024-WH Recessed Pro-Power Kit is an easy-to-install solution for hiding power and audio/video cables behind an HDTV. A duplex receptacle provides power for up to two devices, while a straight blade inlet provides organized cable routing. A flexible serrated screen on the interior of the straight blade inlet keeps cables securely routed.