HDMI 1.4 Switches/Splitters/Extenders
Vanco HDWIRKIT HDMI Wireless ExtenderVanco HDWIRKIT HDMI Wireless Extender
- Extends HDMI signals wirelessly up to 131ft/40m
- Transmits up to 1080p HD video and audio
- Kit includes both Transmitter and Receiver for point to point application
- Able to split wireless HDMI signals to up to 4 displays (additional HDWIR-RX receivers sold separately)
- Multiple kits able to be installed in one application without interference
- Perfect solution where cabling cannot be run such as a mantle or outdoor application
- IR pass-through to control source from display location wirelessly
- Wireless 5 GHz frequency
- No line of sight installation required, wireless signal will pass through most obstacles
- Easy manual front panel or IR setup for multiple units
- Dimensions: 5.25” W x 0.75” H x 3” D
PureLink AV HDMI and USB/KVM over IP Distribution System
Need a way to incorporate audio/video, RS-232, IR, USB, and matrix switching capabilities to your IP network? Look no more! The VIP-200H from PureLink AV allows you to add all of these features with point-to-point extension up to 590 feet, or 180 meters. You can also take advantage of point-to-many and many-to-point via the feature rich VIP IP Video Management Software.
Transmitter Kit Receiver Kit Transmitter and Receiver (1) VIP200H/DV-TX (1) VIP200H/DV-RX (1) VIP200H/DV-TX and (1) VIP200H/DV-RX (1) Power Adapter (1) Power Adapter (2) Power Adapters (1) Infrared Receiver (1) Infrared Emitter (1) Infrared Receiver and (1) Infrared Emitter (1) Remote Control (1) Remote Control General Technical Specifications Supported Resolution Up to 1080p@60Hz (Full HD) Supported Distance Using Cat5E: 492ft (150m); Using Cat6: 590ft (180m) Transmitter Connector Types 1x USB Type B, 1x RS232 (DB9 Female), 1x HDMI Type A (Input), 1x HDMI Type A (Loop Output), 1x RJ45 Receiver Connector Types 4x USB Type A, 1x RS232 (DB9 Male), 1x HDMI Type A, 1x RJ45 Audio Connector 1x 3.5mm Phone Jack (10KΩ / 1Vpp) IR Receiver (Internal) 30-60Khz / ±45° / 5M IR Emitter (External) 3.5mm Stereo Phone Jack Power Supply DC 5V 2A Power Consumption 750mA (Typical) / 1000mA (Max) Operation Temperature 0 to 55℃ Storage Temperature -20 TO 85℃ Humidity Up to 95% Dimensions 4.92 x 5.51 x 1.18" (125 x 140 x 30mm) Weight 0.86lbs (390g) Distribution Point-to-point: 590ft KVM Extender
Distribution: (1) TX to 154+ RX
Switching: Up to 100 TX to (1) RX
Matrix: Up to 100 TX to 154+ RX
From $499.99 - $999.99
Ethereal HDM-GA1 HDMI Gigabit Accelerator for Passive HDMI
This compact, yet innovative solution from Ethereal Home Theater lets you upgrade older passive 24AWG HDMI cables to 18 Gbps bandwidth capabilities. It's a simple plug and play adapter, powered by a single Micro USB cable that can be plugged into an available USB port on the display. It is designed to be mounted at the display side. It features a transmission distance of up to 15 meters. The DDC data integrity circuitry solves EDID low speed data issues. It exceeds HDMI 2.0a standards, supporting 4K/60, 4:4:4 and HDR video.
PureLink 4K HDMI over HDBaseT Extension System
The PureLink AV HCE II Tx/Rx 4K HDMI over HDBaseT Extension System is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.
The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.
PureLink HDMI, RS-232, IR, ARC & Ethernet Receiver over HDBaseT with 3D, 4K Support
The PureLink HTR Rx HDMI, RS-232, IR, ARC & Ethernet Receiver over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.
PureLink HDMI, RS-232, IR, ARC & Ethernet Transmitter over HDBaseT with 3D, 4K
The PureLink HTR Tx HDMI, RS-232, IR, ARC & Ethernet Transmitter over HDBaseT with 3D, 4K Support extends full HDMI signals up to 330ft with zero loss and zero noise delivery. It supports full, uncompressed video up to 4Kx2K @ 30Hz @ 48 bits.